Transmission Oil Change

NOTE

Maximum transmission fluid volume cannot exceed 25oz. (750ml). Fill / check method is not fill to spill. Follow Fluid Change Procedure to verify transmission is filled with fluid. Do not overfill.

Always change the fluid at the intervals outlined in the Periodic Maintenance Interval Chart. Polaris recommends the use of AGL Gearcase Lubricant and Transmission Fluid for this vehicle.

The fill plug 1 is located on the side of the transmission gearcase. Access the fill plug on the right-hand side of the gearcase. The drain plug 2 is located on the bottom of the transmission gearcase. Access the drain plug from the bottom of the vehicle.

To change the transmission fluid, do the following:

  1. Remove the fill plug.

  2. Place a drain pan under the transmission drain plug.

  3. Remove drain plug 2 and allow lubricant to drain completely.

  4. Clean the drain plug magnetic surface.

  5. Reinstall the drain plug and torque to specification.

    TORQUE

    Transmission Fill / Drain Plug:

    14 ft-lbs (19 N⋅m)

  6. Add the recommended amount of lubricant through the fill plug hole1. Do NOT overfill or fill to the bottom of the fill plug hole.

    CAPACITY

    Recommended Transmission Lubricant:

    Polaris AGL

    Capacity:

    25 oz. (750 ml)

  7. Reinstall the fill plug and torque to specification.

    TORQUE

    Transmission Fill / Drain Plug:

    14 ft-lbs (19 N⋅m)

  8. Check for leaks. Dispose of used lubricant properly.