Fluid Change

NOTICE

Maximum transmission fluid volume cannot exceed 25 oz (750 ml).The fill / check method is fill to spill.Follow the Fluid Change procedure to verify the transmission is filled with fluid.

Always change the fluid at the intervals outlined in the Periodic Maintenance Interval Chart. Polaris recommends the use of AGL Gearcase Lubricant & Transmission Fluid for this vehicle.

The fill plug 1 is located on the side of the transmission gearcase. Access the fill plug on the right-hand side of the gearcase. The drain plug 2 is located on the bottom of the transmission gearcase. Access the drain plug from the bottom of the vehicle.

To change the transmission fluid, do the following:

  1. Remove the fill plug 1 and sealing washer 2.

  2. Place a drain pan under the transmission drain plug.

  3. Remove drain plug 3 and sealing washer 4 from the bottom of the gearcase and allow the fluid to drain completely.

  4. Clean the drain plug magnetic surface.

  5. Reinstall the drain plug and washer. Torque to specification.

    TORQUE

    Transmission Drain Plug:

    14 ft-lbs (19 N·m)

  6. Add the recommended amount of fluid through the fill plug hole 1 or fill-to-spill.

    CAPACITY

    Recommended Lubricant:

    Polaris AGL Gearcase Lubricant & Transmission Fluid

    Capacity:

    25 oz (750 ml)

  7. Reinstall the fill plug and washer. Torque to specification.

    TORQUE

    Transmission Fill Plug:

    14 ft-lbs (19 N·m)

  8. Check for leaks. Dispose of used fluid properly.