Solo Rack Bag Kit

P/N 2882854-XXX; 2884113-XXX; 2884862-XXX

1 Before You Begin

Read these instructions and check to be sure all parts and tools are accounted for. Please retain these installation instructions for future reference and parts ordering information.

3 Required Sold Separately

Only parts for installation of the are included. Prior installation of one of the following additional kits is also required (sold separately):

Scout® and Scout® 60 Models

  • Solo Rack Kit, P/N 2880900-XXX or 2884114-XXX

Scout® Bobber Models

  • Scout Bobber Solo Rack Kit, P/N 2882516-XXX

2022 to Current Chief® Models

  • Solo Rack Kit, P/N 2884672-XXX

NOTICE
XXX = Indian Motorcycle® color code (For example: 266 = Black)

4 Kit Contents

Ref

Qty

Part Description

P/N Available Separately
1 1 Solo Rack Bag N/A
2 1 Waterproof Bag Cover (Kit P/N 2884862-XXX) (Not Shown) 2692273

5 Tools Required

None


6 Important

Your is exclusively designed for your vehicle. Please read the installation instructions thoroughly before beginning. Installation is easier if the vehicle is clean and free of debris. For your safety, and to ensure a satisfactory installation, perform all installation steps correctly in the sequence shown.

7 Installation Instructions

7.1 Vehicle Preparation

7.1.1 General

  1. Park motorcycle on a flat surface, fully extend kickstand, and make sure vehicle is stable.

  2. Turn key or ignition switch to OFF position and remove key. If equipped with keyless fob, remove fob from proximity of vehicle.

7.2 Accessory Installation

  1. If applicable and if desired, install waterproof bag cover by installing over the top of the bag.

    NOTICE

    Make sure to align the openings in waterproof bag cover with the buckles on the front of the bag.

  2. With solo rack A free of cargo, tilt solo rack bag 1 so bracket B on underside of solo rack bag 1 hooks on rear of solo rack A.

  3. With quick-release straps C detached, place straps C through rack slots and underneath front of solo rack A before reattaching quick-release straps C.

8 Feedback Form

A feedback form has been created for the installer to provide any comments, questions or concerns about the installation instructions. The form is viewable on mobile devices by scanning the QR code or by clicking HERE if viewing on a PC.