Accessory Installation

  1. Remove and retain four ROPS fasteners and nuts.

  2. With an assistant, align rear brush guard with two intrusion bars.

  3. Pass two retained fasteners through brush guard bracket and intrusion bar. Install with two retained nuts.

    Do not torque fasteners at this time.

  4. Pass two retained fasteners through brush guard bracket and intrusion bar. Install with two retained nuts.

    Do not torque fasteners at this time.

  5. Loosely assemble clamps 2 to brush guard with two bolts 4 and two nuts 3.

  6. Loosely assemble clamps 2 to brush guard with two bolts 4 and two nuts 3.

WARNING
Failure to torque fasteners as directed will adversely affect ROPS integrity and may lead to severe injury or death in an accident.

  1. Torque four ROPS fasteners to specification.

    TORQUE

    ROPS Fasteners:

    44 ft-lbs (60 N·m)

  2. Torque four clamp nuts to specification.

    TORQUE

    Nuts 3:

    16 ft-lbs (22 N·m)

Parent topic: Installation Instructions