1 Before You Begin
Read these instructions and check to be sure all parts and tools are accounted for. Please retain these installation instructions for future reference and parts ordering information.
Rear Panel Kit
2 Application
Verify accessory fitment at www.polaris.com.
3 Kit Contents
|
Ref |
Qty |
Part Description |
P/N Available Separately |
Available Service Kit |
|---|---|---|---|---|
| 1 | 1 | Assembly–Rear Panel | 2638116 | n/a |
| 1.1 | 5 | - Clamp–Lock & Ride®, Base | n/a | 2207386 |
| 1.2 | 5 | - Clamp–Lock & Ride®, Lever | n/a | 2207386 |
4 Tools Required
None
5 Important
Your is exclusively designed for your vehicle. Please read the installation instructions thoroughly before beginning. Installation is easier if the vehicle is clean and free of debris. For your safety, and to ensure a satisfactory installation, perform all installation steps correctly in the sequence shown.
6 Installation Instructions
6.1 Vehicle Preparation
6.1.1 General
-
Shift vehicle transmission into PARK.
-
Turn ignition switch to OFF position and remove key.
6.2 Accessory Installation
-
Install rear panel behind seats from inside passenger cabin.
-
Align Lock & Ride® clamps with roll-cage tubes.
-
Move rear panel upwards until Lock & Ride® clamps are on horizontal tubes.
-
Apply pressure to outside of Lock & Ride® clamps to install onto roll-cage.
7 Feedback Form
A feedback form has been created for the installer to provide any comments, questions or concerns about the installation instructions. The form is viewable on mobile devices by scanning the QR code or by clicking HERE if viewing on a PC.
