Accessory Installation

Peel backing from adhesive side of foam and apply foam pieces 8 and 7 to underside of roof panel within etched dash marks.

Install six U-nuts 6 onto roll-cage mounting plates.

Install front of roof panel with two spacers 5 (between roof and U-nut), two washers 3, and two fasteners 4.

Install roof panel with two washers 3 and two fasteners 4. Torque four front fasteners 4 to specification.

With front of roof secured to roll-cage, begin to slowly pull roof back so that it molds to the roll-cage’s curvature.

Install rear of roof with two washers 3 and two fasteners 2.