Accessory Installation

Remove and keep two screws A. Remove winch cover.

Remove and keep eight screws B to remove front fascia.

Disconnect headlight connectors and accent light connectors.

Install upper bumper bracket support 3 using screws 12 and weldment plate 9.

• If fairlead uses standard mounting holes then install winch fairlead onto mounting plate using screws 10 and nuts 14.

• If fairlead uses inner holes then fairlead adapter is required. Install fairlead and fairlead adapter 6 to mounting plate using screws 10 and nuts 14.

  

Install mounting plate 2 using screws 10 and nuts 14.

Install tightening plate 5 with washers 15 and 16 and screws 13.

Torque screws 10, 12, and 13 to specification.