Accessory Installation
-
Install roof seals per seal kit instructions.
-
Install four U-nuts 3 on underside of roof panel.
-
Put roof panel on top of roll cage with retaining hooks on windshield mounting plate, as shown.
-
Pull rear of roof panel downwards until two clips snap into place.
-
Install front of roof with four screws 4.
Do not torque screws at this time.
-
Install rear of roof with four screws 2.
Do not torque screws at this time.
-
Torque four front screws 4 to specification.
TORQUEFront Roof Screws 4:
41 in-lbs (4.7 N·m)
-
Torque four rear screws 2 to specification.
TORQUERear Roof Screws 2:
41 in-lbs (4.7 N·m)