en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

2020 RANGER XP 1000 / NorthStar Edition / Texas Edition Owner's Manual

P/N 9929930

i 2020 RANGER XP 1000 / NorthStar Edition / Texas Edition Owner's Manual

 
2020 Owner’s Manual

RANGER XP® 1000
RANGER CREW® XP 1000
RANGER XP® 1000 NorthStar Edition
RANGER CREW® XP 1000 NorthStar Edition
RANGER XP® 1000 Texas Edition
RANGER CREW® XP 1000 Texas Edition

Trademarks

Unless noted, trademarks are the property of Polaris Industries Inc.

Recreational Off-Highway Vehicle Association® and ROHVA® are registered trademarks of Recreational Off-Highway Vehicle Association. BatteryMINDer® is a registered trademark of VDC Electronics Inc. Loctite® is a registered trademark of Henkel Corporation. NYOGEL® is a registered trademark of Nye Lubricants, Inc. WD-40® is registered to WD-40 Manufacturing Company. QR Codes® is a registered trademark of DENSO WAVE INCORPORATED. Maxxis® is a registered trademark of Cheng Shin Rubber Ind. Co., Ltd. Apple® is a registered trademark of Apple Inc. ANSI® is a registered trademark of American National Standards Institute, Inc. Bluetooth® is a registered trademark of Bluetooth Sig, Inc. Google Play® is a registered trademark of Google, Inc. Sandisk® is a registered trademark of SANDISK LLC

Copyright Information

Copyright 2019 Polaris Industries Inc. All information contained within this publication is based on the latest product information at the time of publication. Due to constant improvements in the design and quality of production components, some minor discrepancies may result between the actual vehicle and the information presented in this publication. Depictions and/or procedures in this publication are intended for reference use only. No liability can be accepted for omissions or inaccuracies. Any reprinting or reuse of the depictions and/or procedures contained within, whether whole or in part, is expressly prohibited.

The original instructions for this vehicle are in English. Other languages are provided as translations of the original instructions.

Printing

Printed in U.S.A.

ii Welcome

Thank you for purchasing a POLARIS vehicle, and welcome to our world-wide family of POLARIS enthusiasts. Be sure to visit us online at www.polaris.com for the latest news, new product introductions, upcoming events, career opportunities and more.

Here at POLARIS we proudly produce an exciting line of utility and recreational products.

  • Snowmobiles

  • SPORTSMAN All-terrain vehicles

  • GEM vehicles

  • RANGER utility vehicles

  • SLINGSHOT three wheel motorcycles

  • RZR sport vehicles

  • INDIAN motorcycles

  • POLARIS POWER generators

  • POLARIS DEFENSE combat vehicles

  • Timbersled Snow Bikes

We believe POLARIS sets a standard of excellence for all utility and recreational vehicles manufactured in the world today. Many years of experience have gone into the engineering, design, and development of your POLARIS vehicle, making it the finest machine we’ve ever produced.

For safe and enjoyable operation of your vehicle, be sure to follow the instructions and recommendations in this owner’s manual. Review the safety DVD that came with your vehicle. POLARIS also recommends that all drivers take the ROHVA® safety e-course and a ROHVA® hands-on safety training course. Visit www.rohva.org or call 866-267-2751.

Your manual contains instructions for minor maintenance, but information about major repairs is outlined in the POLARIS Service Manual and can be performed by a factory certified Master Service Dealer (MSD) Technician.

Your POLARIS dealer knows your vehicle best and is interested in your total satisfaction. Your POLARIS dealership can perform all of your service needs during, and after, the warranty period.

Chapter 1: Introduction

1.1.1: Before You Ride

This POLARIS vehicle is an off-road vehicle. Familiarize yourself with all laws and regulations concerning the operation of this vehicle in your area.

WARNING

Failure to heed the warnings and safety precautions contained in this manual can result in severe injury or death. Your POLARIS vehicle is not a toy and can be hazardous to operate. This vehicle handles differently than cars, trucks or other off-road vehicles. A collision or rollover can occur quickly, even during routine maneuvers like turning, or driving on hills or over obstacles, if you fail to take proper precautions.

  • Read this owner’s manual and review the safety DVD that came with your vehicle. A free extra copy of the DVD can be obtained by contacting your local POLARIS dealer. Understand all safety warnings, precautions and operating procedures before operating the vehicle. Keep this manual with the vehicle.

  • Never operate this vehicle without proper instruction. Take an authorized training course. See the Safety Training section for more information.

  • This vehicle is an ADULT VEHICLE ONLY. You MUST be at least age 16 and have a valid driver’s license to operate this vehicle.

  • Always use the cab nets (or doors) while riding in this vehicle. Always keep hands, feet and all other body parts inside the vehicle at all times.

  • Always wear a helmet, eye protection, gloves, long-sleeve shirt, long pants and over-the-ankle boots.

  • Never operate this vehicle under the influence of drugs or alcohol, as these conditions impair judgement and reduce the operator’s ability to react.

  • Complete the New Operator Driving Procedures outlined in this manual.
    Never allow a guest to operate this vehicle until the guest has completed the
    New Operator Driving Procedures.

  • Never permit a guest to operate this vehicle unless the guest has reviewed the owner’s manual and all safety labels and has completed a safety training

1.1.2: Safety Symbols and Signal Words

The following signal words and symbols appear throughout this manual and on your vehicle. Your safety is involved when these words and symbols are used. Become familiar with their meanings before reading the manual.

DANGER

DANGER indicates a hazardous situation which, if not avoided, WILL result in death or serious injury.

WARNING

WARNING indicates a hazardous situation which, if not avoided, COULD result in death or serious injury.

CAUTION

CAUTION indicates a hazardous situation which, if not avoided, COULD result in minor to moderate injury.

NOTICE

NOTICE provides key information by clarifying instructions.

IMPORTANT

IMPORTANT provides key reminders during disassembly, assembly, and inspection of components.

The Prohibition Safety Sign indicates an action NOT to take in order to avoid a hazard.

The Mandatory Action Sign indicates an action that NEEDS to be taken to avoid a hazard.

1.1.3: European Vibration and Noise

The driver-perceived noise and hand/arm and whole body vibration levels of this machinery is measured per EN 15997.

The operating conditions of the machinery during testing:

The vehicles were in like-new condition. The environment was controlled as indicated by the test procedure(s).

The uncertainty of vibration exposure measurement is dependent on many factors, including:

  • Instrument and calibration uncertainty

  • Variations in the machine such as wear of components

  • Variation of machine operators such as experience or physique

  • Ability of the worker to reproduce typical work during measurements

  • Environmental factors such as ambient noise or temperature

1.1.4: Vehicle Identification Numbers

Record your vehicle's identification numbers and key number in the spaces provided. Remove the spare key and store it in a safe place. An ignition key can be duplicated only by ordering a POLARIS key blank (using your key number) and mating it with one of your existing keys. The ignition switch must be replaced if all keys are lost.

NOTICE
The images below are for reference only. Depending on model, your vehicle may differ slightly.

The engine serial number can be found on a decal applied to the front of the engine crankcase 1 or stamped into the crankcase on the PTO side of the engine 2.

The VIN can be found stamped on a portion of the left rear frame 3, above the PVT cover.

Vehicle Model Number:  
Vehicle Identification Number (VIN):  
Engine Serial Number:  
Key Number  

Chapter 2: Safety

2.2.1: Safety Training

Safety training is a top priority for POLARIS. POLARIS strongly encourages you and any family members who will be riding this vehicle to take a training course.

ROHVA® (Recreational Off-Highway Vehicle Association®) provides both an online safety e-course and a hands-on safety course. Visit www.rohva.org or call 866-267-2751.

Your POLARIS vehicle is considered an off-road vehicle. Familiarize yourself with all laws and regulations concerning the operation of this vehicle in your area.

We strongly advise you to strictly follow the recommended maintenance program outlined in your owner's manual. This preventive maintenance program is designed to ensure that all critical components on your vehicle are thoroughly inspected at specific intervals.

For more information about recreational off-road vehicle safety in the United States, visit www.rohva.org, call 949-255-2560 or call POLARIS at 800-342-3764.

2.2.2: Safe Riding Gear

Always wear a helmet, eye protection, gloves, long-sleeve shirt, long pants, over-the-ankle boots and seat belt (if equipped) at all times. Protective gear reduces the chance of injury.

2.2.2.1: Rider Comfort

Under certain operating conditions, heat generated by the engine and exhaust system can elevate temperatures in the rider cab area. The condition occurs most frequently when a vehicle is being operated in high ambient temperatures at low speeds and/or high load conditions for an extended period of time. The use of certain windshield, roof and/or cab systems may contribute to this condition by restricting airflow.

Any discomfort due to heat buildup in this area can be minimized by wearing proper riding apparel and by varying speeds to increase airflow.

  • 1 Helmet

  • 2 Eye Protection

  • 3 Long Sleeves

  • 4 Gloves

  • 5 Long Pants

  • 6 Over-the-Ankle Boots

2.2.2.2: Helmet

Wearing a helmet can prevent a severe head injury. Whenever riding this POLARIS vehicle, always wear a helmet that meets or exceeds established safety standards. Clasp the buckle and pull each strap tight to ensure the helmet is properly secured to the head.

Parents and supervising adults should verify that young operators have a helmet that fits, and should obtain one of proper size if it does not fit before allowing operation.

  • Approved helmets in the USA and Canada bear a U.S. Department of Transportation (DOT) label.

  • Approved helmets in Europe, Asia and Oceania bear the ECE 22.05 label. The ECE mark consists of a circle surrounding the letter E, followed by the distinguishing number of the country which has granted approval. The approval number and serial number will also be displayed on the label.

2.2.2.3: Eye Protection

Do not depend on eyeglasses or sunglasses for eye protection. Whenever riding this POLARIS vehicle, always wear shatterproof goggles or use a shatterproof helmet face shield. POLARIS recommends wearing approved Personal Protective Equipment (PPE) bearing markings such as VESC 8, V-8, Z87.1, or CE. Make sure protective eye wear is kept clean.

2.2.2.4: Gloves

Wear gloves for comfort and for protection from sun, cold weather and other elements.

2.2.2.5: Boots

Wear sturdy over-the-ankle boots for support and protection. Never ride a POLARIS vehicle with bare feet or sandals.

2.2.2.6: Clothing

Wear long sleeves and long pants to protect arms and legs.

2.2.3: Safety Labels and Locations

Warning labels have been placed on the vehicle for your protection. Read and follow the instructions of the labels on the vehicle carefully. If any of the labels depicted in this manual differ from the labels on your vehicle, always read and follow the instructions of the labels on the vehicle.

If an informational or graphic label becomes illegible or comes off, contact your POLARIS dealer to obtain a replacement. Replacement safety labels are provided by POLARIS at no charge. The part number is printed on the label.

The safety labels 1 are located on the front ROPS, above the driver’s head.

2.2.3.1: Seat Belt / Driver Warning

WARNING

Improper vehicle use can result in SEVERE INJURY or DEATH

Be Prepared

  • Fasten seat belt.

  • Wear an approved helmet and protective gear.

  • ALWAYS use vehicle cab nets and/or doors.

  • Driver must be able to sit with back against seat, feet flat on the floor, and hands on steering wheel. Stay completely inside the vehicle.

Drive Responsibly

Avoid loss of control and rollovers:

  • Avoid abrupt maneuvers, sideways sliding, skidding or fishtailing, and never do donuts.

  • Slow down before entering a turn.

  • Avoid hard acceleration when turning, even from a stop.

  • Plan for hills, rough terrain, ruts and other changes in traction and terrain.

  • Avoid paved surfaces.

  • Avoid sidehilling (riding across slopes).

Be Sure to Pay Attention and Plan Ahead

If you think or feel the vehicle may tip or roll, reduce your risk of injury:

  • Keep a firm grip on the steering wheel and brace yourself.

  • Do not put any part of your body outside of the vehicle for any reason.

Rollovers have caused severe injuries and death, even on flat, open areas.

2.2.3.2: Payload Warning/Shift Caution

RANGER Never Exceed If Total Payload Exceeds
BASE 1000 25 mph (40 kph) 550 lbs. (250 kg)
XP 1000 30 mph (48 kph) 550 lbs. (250 kg)
CA XP 1000 30 mph (48 kph) 550 lbs. (250 kg)
BASE CREW 35 mph (56 kph) 980 lbs. (445 kg)
CREW 1000 43 mph (70 kph) 980 lbs. (445 kg)
CA CREW 1000 43 mph (70 kph) 980 lbs. (445 kg)

CAUTION

To avoid transmission damage, shift only when vehicle is stationary and at idle. When vehicle is stopped, place shift in parked position.

2.2.3.3: Fuel Transport Warning

The Fuel Transport Warning 1 is located in the cargo box.
WARNING
NEVER carry fuel or other flammable liquids on this vehicle. Failure to follow this instruction could lead to serious burn injuries or death.

2.2.3.4: Load/Passenger/Tire Pressure Warning

The Load/Passenger/Tire Pressure Warning 1 is located in the cargo box.

WARNING

  • Never carry passengers in cargo box.

  • Passengers can be thrown off. This can cause serious injury or death.

  • If total payload is greater than 500 lbs, the vehicle must be operated in LOW range.

WARNING

IMPROPER TIRE PRESSURE OR OVERLOADING CAN CAUSE LOSS OF CONTROL RESULTING IN SERIOUS INJURY OR DEATH.

  • Reduce speed and allow greater distance for braking when carrying cargo.

  • Overloading or carrying tall, off-center, or unsecured loads will increase your risk of losing control. Loads should be centered and carried as low as possible in box.

  • For stability on rough or hilly terrain, reduce speed and cargo.

RANGER XP 1000 and XP 1000 Texas Edition Models
Ranger XP 1000 CA XP 1000
MAXIMUM CARGO BOX LOAD

1000 lbs.

(454 kg)

600 lbs.

(272 kg)

TIRE PRESSURE IN PSI (KPa)*

FRONT 10 (69)

REAR 16 (110)

FRONT 10 (69)

REAR 16 (110)

MAXIMUM WEIGHT CAPACITY
INCLUDES WEIGHT OF OPERATOR, PASSENGER, CARGO, AND ACCESSORIES.

1500 lbs.

(680 kg)

1100 lbs.

(499 kg)

Read Operation & Maintenance Manual for more detailed loading information.
*if equipped with high mounted intakes: FRONT 12 (82), REAR 14 (96)
RANGER CREW XP 1000 and RANGER CREW XP 1000 Texas Edition Models
Ranger CREW 1000 CA CREW 1000
MAXIMUM CARGO BOX LOAD

1000 lbs.

(454 kg)

600 lbs.

(272 kg)

TIRE PRESSURE IN PSI (KPa)*

FRONT 18 (124)

REAR 20 (137)

FRONT 18 (124)

REAR 20 (137)

MAXIMUM WEIGHT CAPACITY
INCLUDES WEIGHT OF OPERATOR, PASSENGER, CARGO, AND ACCESSORIES.

1750 lbs.

(794 kg)

1350 lbs.

(612 kg)

Read Operation & Maintenance Manual for more detailed loading information.
*if equipped with high mounted intakes: FRONT 12 (82), REAR 22 (151)
RANGER XP 1000 NorthStar Edition Models
Ranger HVAC 1000 CA HVAC 1000
MAXIMUM CARGO BOX LOAD

1000 lbs.

(454 kg)

600 lbs.

(272 kg)

TIRE PRESSURE IN PSI (KPa)

FRONT 14 (96)

REAR 16 (110)

FRONT 14 (96)

REAR 16 (110)

MAXIMUM WEIGHT CAPACITY
INCLUDES WEIGHT OF OPERATOR, PASSENGER, CARGO, AND ACCESSORIES.

1275 lbs.

(578 kg)

1100 lbs.

(499 kg)

Read Operation & Maintenance Manual for more detailed loading information.
RANGER CREW XP 1000 NorthStar Edition Models
Ranger HVAC CREW 1000
MAXIMUM CARGO BOX LOAD

1000 lbs.

(454 kg)

TIRE PRESSURE IN PSI (KPa)

FRONT 18 (124)

REAR 20 (137)

MAXIMUM WEIGHT CAPACITY
INCLUDES WEIGHT OF OPERATOR, PASSENGER, CARGO, AND ACCESSORIES.

1350 lbs.

(612 kg)

Read Operation & Maintenance Manual for more detailed loading information.

2.2.3.5: Clutch Cover Warning

WARNING

The Clutch Cover Warning 1 is located on the clutch cover.

  • Improper service or maintenance of this PVT system can result in vehicle damage, SEVERE INJURY or DEATH.

  • Always look for and remove debris inside and around clutch and vent system when replacing belt.

  • Read owner’s manual or see authorized Polaris dealer.

2.2.3.6: Air Box Caution

CAUTION

Use a Polaris approved air filter. The use of a non-Polaris approved air filter may cause engine damage. Before installing filter, ensure there is no dirt or debris in the clean side of the intake tube. The air filter must be properly seated before the lid is reinstalled. Please reference your owner’s manual for additional information regarding air filter service.

2.2.3.7: International Safety Labels

2.2.3.7.1: General Alert

Read your owner’s manual. Never allow anyone under 16 years of age to operate this vehicle. Never use alcohol or drugs before or while driving or riding. Do not allow operation on public roads (unless designated for off-highway vehicle access). Wear approved helmet, goggles, and protective clothing. Always wear seat belts. Always use the cab nets or doors. Never exceed seating capacity.

2.2.3.7.2: Intake Alert (7185975)

Use a Polaris approved air filter. The use of a non-Polaris approved air filter may cause engine damage. Before installing filter ensure there is no dirt or debris in the clean side of the intake tube. The air filter must be properly seated and the hinges fully inserted when the lid is reinstalled. Please reference your owner’s manual for additional information regarding the air filter service.
Label Location: on the air box.

2.2.3.7.3: Clutch Cover Alert (7181427)

Read your owner’s manual. Keep body parts away from belt.

2.2.3.7.4: Shift Alert

CAUTION
To avoid transmission damage, shift only when vehicle is stationary and at idle.
APPLY BRAKE TO START. When this vehicle is not in operation, or unattended, place shift in the park position.

2.2.3.7.5: Load/Passenger/Tire Pressure Alert

Never carry passengers in cargo box. Passengers can be thrown off. This can cause serious injury or death. Read owner’s manual. Never carry or transport fuel on this vehicle.

Vehicle Maximum Cargo Box Load Tire Pressure in kPa/bar Maximum Capacity
RANGER XP 454 kg Front: 69 kPa/0,69 bar
Rear: 96 kPa/0,96 bar
Occupants: 3
Weight (Driver + Passengers + Tow Load): 795 kg

2.2.4: Safety Warnings

WARNING

Failure to operate this vehicle properly can result in a collision, loss of control, accident or rollover, which may result in serious injury or death. Heed all safety warnings outlined in this section of the owner’s manual and in the safety DVD provided with your vehicle. See the OPERATION section of the owner’s manual for proper operating procedures.

2.2.4.1: Operator Safety

WARNING
Serious injury or death can result if you do not follow these instructions and procedures, which are outlined in further detail within your owner's manual.
  • Read this entire manual and all labels carefully. Follow the operating procedures described.

  • Never allow anyone under the age of 16 to operate this vehicle and never allow anyone without a valid driver's license to operate this vehicle.

  • Do not carry a passenger until you have at least two hours of driving experience with this vehicle.

  • All riders must be able to sit with backs against the seat, both feet flat on the floor and both hands on the steering wheel (if driving) or on a passenger hand hold.

  • The driver and all passengers must wear helmets, eye protection, gloves, long-sleeve shirts, long pants, over-the-ankle boots and their seat belts at all times.

  • Always use the cab nets (or doors) while riding in this vehicle.

  • Always keep hands and feet inside the vehicle at all times.

  • Always keep both hands on the steering wheel and both feet on the floorboards of the vehicle during operation.

  • Never permit a guest to operate this vehicle unless the guest has read this manual and all product labels.

  • To reduce rollover risk, be especially careful when encountering obstacles and slopes and when braking on hills or during turns.

  • This vehicle is for off road use only. Never operate on public roads (unless marked for off-road use). Always avoid paved surfaces.

  • Never consume alcohol or drugs before or while operating this vehicle.

  • Never operate at excessive speeds. Always travel at a speed proper for the terrain, visibility and operating conditions, and your experience.

  • Never attempt jumps or other stunts.

  • Always inspect the vehicle before each use to make sure it's in safe operating condition.

  • Always follow the inspection procedures described in this manual.

  • Always travel slowly and use extra caution when operating on unfamiliar terrain. Be alert to changing terrain.

  • Never operate on excessively rough, slippery or loose terrain.

  • Always follow proper procedures for turning. Practice turning at slow speeds before attempting to turn at faster speeds. Never turn at excessive speeds.

  • Always have this vehicle checked by an authorized POLARIS dealer if it has been involved in an accident.

  • Never operate this vehicle on hills too steep for the vehicle or for your abilities. Practice on smaller hills before attempting larger hills.

  • Always follow proper procedures for climbing hills as described in this manual. Check the terrain carefully before attempting to climb a hill. Never climb hills with excessively slippery or loose surfaces. Never apply throttle suddenly. Never make sudden gear changes. Never go over the top of a hill at high speed.

  • Always follow the proper procedures outlined in this manual for traveling downhill and for braking on hills. Check the terrain carefully before descending a hill. Never travel downhill at high speed. Avoid going downhill at an angle, which would cause the vehicle to lean sharply to one side. Travel straight down the hill where possible.

  • Always check for obstacles before operating in a new area. Never attempt to operate over large obstacles such as large rocks or fallen trees. Always follow the proper procedures outlined in this manual when operating over obstacles.

  • Always be careful of skidding or sliding. On slippery surfaces such as ice, travel slowly and exercise caution to reduce the chance of skidding or sliding out of control.

  • Never operate your vehicle in fast-flowing water or in water deeper than that specified in this manual. Wet brakes may have reduced stopping ability. Test your brakes after leaving water. If necessary, apply them lightly several times to let friction dry out the pads.

  • Always be sure there are no obstacles or people behind your vehicle when operating in reverse. When it's safe to proceed in reverse, move slowly. Avoid turning at sharp angles in reverse.

  • Always use the proper size and type of tires specified in this manual. Always maintain proper tire pressure as specified on safety labels. Failure to adhere to either may impact vehicle stability, driveline durability, or general vehicle handling.

  • Never modify this vehicle through improper installation or use of non-POLARIS approved accessories.

  • Always re-install plastics and heat shields after vehicle is serviced.

  • Never exceed the stated load capacity for this vehicle. Cargo should be properly distributed and securely attached. Reduce speed and follow the instructions in this manual for hauling cargo or pulling a trailer. Allow a greater distance for braking.

  • Always place the transmission in PARK before getting out of the vehicle.

  • Always engage the park brake (if equipped) when leaving the vehicle unattended.

  • Always stop the engine before refueling. Make sure the refueling area is well ventilated and free of any source of flame or sparks.

  • Always remove the ignition key when the vehicle is not in use to prevent unauthorized use by someone under the age of 16 or without a driver’s license and proper training, or accidental starting.

2.2.4.2: Operating Without Instruction

Operating this vehicle without proper instruction increases the risk of an accident. The operator must understand how to operate the vehicle properly in different situations and on different types of terrain.

  • All operators must read and understand the owner's manual and all warning and instruction labels before operating the vehicle.

  • All operators should review the safety DVD provided with this vehicle and take a ROHVA® training course (www.rohva.org).

2.2.4.3: Age Restrictions

  • This vehicle is an ADULT VEHICLE ONLY. Operation is prohibited for anyone under 16 years of age or anyone without a valid driver’s license.

  • The operator must be tall enough to sit with back against the seat, both feet flat on the floor and both hands on the steering wheel (if equipped) or handlebars.

2.2.4.4: Using Alcohol or Drugs

WARNING

Never consume alcohol or drugs before or while operating this vehicle.



Operating this vehicle after consuming alcohol or drugs could adversely affect operator judgment, reaction time, balance and perception.

2.2.4.5: Failure to Inspect Before Operating

WARNING
Failure to inspect and verify that the vehicle is in safe operating condition before operating increases the risk of an accident. Always perform the Pre-Ride Inspection outlined in the Operation chapter before each use of your vehicle to make sure it's in safe operating condition. Always follow the inspection and maintenance procedures and schedules described in this owner’s manual. See the Periodic Maintenance section of the Maintenance chapter.

2.2.4.6: Protective Apparel

Riding in this vehicle without wearing an approved helmet and protective eyewear and footwear increases the risk of a serious injuries in the event of an accident.

Operator and/or all passengers must always wear an approved helmet that fits properly, gloves, long-sleeve shirt, long pants, over-the-ankle boots, and eye protection (goggles or face shield).

2.2.4.7: Seat Belts

WARNING

Riding in this vehicle without wearing the seat belt increases the risk of serious injury in the event of rollover, loss of control, other accident or sudden stop. Seat belts may reduce the severity of injury in these circumstances. The operator and all passengers MUST wear their seat belt at all times.

2.2.4.8: Operating With a Load on the Vehicle

The weight of the cargo, operator, and passengers impacts vehicle operation and stability. For your safety and the safety of others, carefully consider how your vehicle is loaded and how to safely operate the vehicle. Follow the instructions in this manual for loading, tire pressure, gear selection and speed.

  • Do not exceed vehicle weight capacities. The vehicle’s maximum weight capacity is listed in the specifications section of this manual and on a label on the vehicle. When determining the weight you are adding to the vehicle, include the weight of the operator, passengers, accessories, loads in the rack or box and the load on the trailer tongue. The combined weight of these items must not exceed the maximum weight capacity.

  • The recommended tire pressures are listed in the specifications section of this manual and on a label on the vehicle.

Always follow these guidelines:

Under ANY of these conditions: Do ALL of these steps:
Operator and/or cargo exceeds half the maximum weight capacity
  1. Slow down.

  2. Verify tire pressure.

  3. Use extra caution when operating.

Operating in rough terrain
Operating over obstacles
Climbing an incline
Towing

2.2.4.9: Cab Nets (if equipped)

Riding in this vehicle without using the cab nets (or doors, if equipped) increases the risk of serious injury or death in the event of an accident or rollover. Cab nets (or doors) must be used by both operator and passengers at all times. Make sure all latches are secure before operating the vehicle.

Always inspect cab nets and latches for tightness, wear and damage before each use of the vehicle. Use the strap adjusters to tighten any loose straps. Promptly replace worn or damaged cab nets and latches with new cab nets and latches. Your POLARIS dealer can assist.

2.2.4.10: Cab Doors (if equipped)

Riding in this vehicle without closed and latched cab doors increases the risk of serious injury or death in the event of an accident or rollover. Always make sure all cab doors are closed and latched while riding in this vehicle. Cab doors are NOT intended to be used as arm rests. Always keep hands and feet inside the vehicle at all times.

2.2.4.11: Improper Tire Maintenance

WARNING

Operating this vehicle with improper tires or with improper or uneven tire pressure could cause loss of control or accident. Always use the size and type of tires specified for your vehicle. Always maintain proper tire pressure as described in the owner's manual and on safety labels.

2.2.4.12: Operating on Pavement

This vehicle's tires are designed for off-road use only, not for use on pavement. Operating this vehicle on paved surfaces (including sidewalks, paths, parking lots and driveways) may adversely affect the handling of the vehicle and may increase the risk of loss of control and accident or rollover. Avoid operating the vehicle on pavement. If it's unavoidable, travel slowly, travel short distances and avoid sudden turns or stops.

2.2.4.13: Operating on Public Roads

WARNING

Operating this vehicle on public streets, roads or highways could result in a collision with another vehicle. Never operate this vehicle on any public street, road or highway, including dirt and gravel roads (unless designated for off-highway use).

2.2.4.14: Operating at Excessive Speeds

CAUTION

Operating this vehicle at excessive speeds increases the operator's risk of losing control. Always operate at a speed that's appropriate for the terrain, the visibility and operating conditions and your skills and experience.

2.2.4.15: Jumps and Stunts

CAUTION

Exhibition driving increases the risk of an accident or rollover. DO NOT do power slides, “donuts”, jumps or other driving stunts. Avoid exhibition driving.

2.2.4.16: Turning Improperly

CAUTION

Turning improperly could cause loss of traction, loss of control, accident or rollover. Always follow proper procedures for turning as described in this owner’s manual.

Avoid sharp turns. Never turn while applying heavy throttle. Never make abrupt steering maneuvers. Practice turning at slow speeds before attempting to turn at faster speeds.

2.2.4.17: Improper Hill Climbing

CAUTION

Improper hill climbing could cause loss of control or rollover. Use extreme caution when operating on hills. Always follow proper procedures for hill climbing as described in this owner's manual.

2.2.4.18: Descending Hills Improperly

CAUTION

Improperly descending a hill could cause loss of control or rollover. Always follow proper procedures for traveling down hills as described in this owner’s manual.

2.2.4.19: Crossing Hillsides

CAUTION

Driving on a sidehill is not recommended. Improper procedure could cause loss of control or rollover. Avoid crossing the side of any hill unless absolutely necessary. If crossing a hillside is unavoidable, always follow proper procedures as described in this owner's manual.

2.2.4.20: Stalling While Climbing a Hill

CAUTION

Stalling or rolling backwards while climbing a hill could cause a rollover. Maintain a steady speed when climbing a hill.

If you lose all forward speed:

Apply the brakes gradually until the vehicle is fully stopped. Place the transmission in reverse and slowly allow the vehicle to roll straight downhill while applying light brake pressure to control speed.

If you begin rolling downhill:

Never apply engine power. Apply the brakes gradually until the vehicle is fully stopped. Place the transmission in reverse and slowly allow the vehicle to roll straight downhill while applying light brake pressure to control speed.

2.2.4.21: Operating in Unfamiliar Terrain

CAUTION

Failure to use extra caution when operating on unfamiliar terrain could result in an accident or rollover.

CAUTION

Unfamiliar terrain may contain hidden rocks, bumps, or holes that could cause loss of control or rollover.

Travel slowly and use extra caution when operating on unfamiliar terrain. Always be alert to changing terrain conditions.

2.2.4.22: Operating Improperly in Reverse

CAUTION

Improperly operating in reverse could result in a collision with an obstacle or person. Always follow proper operating procedures as outlined in this manual.

Before shifting into reverse gear, always check for obstacles or people behind the vehicle. When it's safe to proceed, back slowly.

2.2.4.23: Skidding or Sliding

CAUTION

Failure to use extra caution when operating on excessively rough, slippery or loose terrain could cause loss of traction, loss of control, accident or rollover. Do not operate on excessively slippery surfaces. Always slow down and use additional caution when operating on slippery surfaces.

CAUTION

Skidding or sliding due to loss of traction can cause loss of control or rollover (if tires regain traction unexpectedly). Always follow proper procedures for operating on slippery surfaces as described in this owner's manual.

2.2.4.24: Operating Over Obstacles

CAUTION

Improperly operating over obstacles could cause loss of control or rollover. Before operating in a new area, check for obstacles. Avoid operating over large obstacles such as large rocks and fallen trees. Always follow the proper procedures outlined in this manual when operating over obstacles.

2.2.4.25: Operating Through Water

CAUTION

Operating through deep or fast-flowing water can cause loss of traction, loss of control, rollover or accident. Never operate in fast-flowing water or in water that exceeds the floor level of the vehicle.

Always follow proper procedures for operating in water as described in this owner’s manual.

Wet brakes will have reduced stopping ability. After leaving water, test the brakes. Apply them lightly several times while driving slowly. The friction will help dry out the pads.

2.2.4.26: Operating on Frozen Bodies of Water

WARNING

Serious injury or death can result if the vehicle and/or the operator fall through the ice. Never operate the vehicle on a frozen body of water unless you have first verified that the ice is sufficiently thick to support the weight and moving force of the vehicle, you and your cargo, together with any other vehicles in your party.

Always check with local authorities and residents to confirm ice conditions and thickness over your entire route. Vehicle operators assume all risk associated with ice conditions on frozen bodies of water.

2.2.4.27: Operating a Damaged Vehicle

CAUTION

Operating a damaged vehicle can result in an accident. After any rollover or other accident, have a qualified service dealer inspect the entire machine for possible damage, including (but not limited to) seat belts, rollover protection devices, brakes, throttle, and steering systems.

2.2.4.28: Improper Cargo Loading

Overloading the vehicle or carrying cargo improperly may cause changes in stability and handling, which could cause loss of control or an accident.

  • Always follow the instructions in this owner’s manual for carrying cargo.

  • Never exceed the stated load capacity for this vehicle.

  • Cargo should be properly distributed and securely attached.

  • Reduce speed when carrying cargo or pulling a trailer. Allow a greater distance for braking.

2.2.4.29: Poor Visibility

CAUTION

Operating this vehicle in darkness or inclement weather could result in a collision or accident, especially if operating on a road or street. This vehicle is not equipped with highway-approved lights. Operate this vehicle off-road only. Use caution and drive at reduced speeds in conditions of reduced visibility such as fog, rain and darkness. Clean headlights frequently and replace burned out headlamps promptly.

2.2.4.30: Hot Exhaust Systems

WARNING

Exhaust system components are very hot during and after use of the vehicle. Hot components can cause burns and fire. Do not touch hot exhaust system components. Always keep combustible materials away from the exhaust system.

Use caution when traveling through tall grass, especially dry grass and when traveling through muddy conditions. Always inspect the underside of the vehicle and areas near the exhaust system after driving through tall grass, weeds, brush, other tall ground cover, and muddy conditions. Promptly remove any grass, debris or foreign matter clinging to the vehicle and pay particular attention to the exhaust system area.

2.2.4.31: Exposure to Exhaust

CAUTION

Engine exhaust fumes are poisonous and can cause loss of consciousness or death in a short time. Never start the engine or let it run in an enclosed area. Operate this vehicle only outdoors or in well-ventilated areas.

2.2.4.32: Refueling

Gasoline is highly flammable and explosive under certain conditions.

  • Always exercise extreme caution whenever handling gasoline.

  • Always turn off the engine when refueling.

  • Always refuel outdoors or in a well ventilated area free of any source of flame or sparks.

  • NEVER carry fuel or other flammable liquids on this vehicle. Failure to follow this instruction could lead to serious burn injuries or death.

  • Do not smoke or allow open flames or sparks in or near the area where refueling is performed or where gasoline is stored.

  • Do not overfill the tank. Do not fill the tank neck.

  • If gasoline spills on your skin or clothing, immediately wash it off with soap and water and change clothing.

2.2.4.33: Unauthorized Use of the Vehicle

Leaving the keys in the ignition can lead to unauthorized use of the vehicle by someone under the age of 16, without a drivers license, or without proper training. This could result in an accident or rollover. Always remove the ignition key when the vehicle is not in use.

2.2.4.34: Equipment Modifications

Your POLARIS vehicle is designed to provide safe operation when used as directed. Modifications to your vehicle may negatively impact vehicle stability. Failure of critical machine components may result from operation with any modifications, especially those that increase speed or power. This vehicle may become less stable at speeds higher than those for which it is designed. Loss of control may occur at higher speeds.

Do not install any non-POLARIS-approved accessory or modify the vehicle for the purpose of increasing speed or power. Any modifications or installation of non-POLARIS-approved accessories could create a substantial safety hazard and increase the risk of bodily injury.

The POLARIS limited warranty on your POLARIS vehicle will be terminated if any non-POLARIS approved equipment and/or modifications have been added to the vehicle that increase speed or power.

The addition of certain accessories, including (but not limited to) mowers, blades, tires, sprayers, or large racks, may change the handling characteristics of the vehicle. Use only POLARIS-approved accessories, and familiarize yourself with their function and effect on the vehicle.

The addition of certain accessories, including (but not limited to) overhead audio speakers, may change the forward clearance in the vehicle. Polaris recommends selecting a helmet that is compatible with the equipment on your vehicle and provides the greatest amount of forward clearance. Always wear a helmet that meets or exceeds the specifications in this owner’s manual. Refer to the Safe Riding Gear section of this owner’s manual for more information. Use only POLARIS-approved accessories.

FOR MORE INFORMATION ABOUT SAFETY IN THE UNITED STATES call POLARIS at 1-800-342-3764.

Chapter 3: Features and Controls

3.3.1: Component Locations

  • 1 Console

  • 2 Headlights

  • 3 Radiator/AC Condenser

  • 4 Bumper/Brush Guard

  • 5 Tailgate

  • 6 Taillights

  • 7 Wheel/Tire

  • 8 Receiver Hitch

  • 9 ROPS Cab Frame

  • 10 Windshield (if equipped)

  • 11 Door (if equipped)

  • 12 Fuel Cap

  • 13 Cargo Box Release Lever

  • 14 Cargo Box

  • 15 Winch (if equipped)

3.3.2: Console


  • 1 Steering Wheel

  • 2 Instrument Cluster

  • 3 Ignition

  • 4 Gear Selector (Shifter)

  • 5 Ride Command Display (if equipped)

  • 6 Headlight Switch

  • 7 Front Light Bar Switch (if equipped)

  • 8 Rear Light Bar Switch (if equipped)

  • 9 AWD/Turf Mode Swicth

  • 10 3-Mode Throttle Control Switch

  • 11 HVAC Control Panel (if equipped)

  • 12 12 V Auxiliary Outlets

  • 13 Winch Remote (In Storage Compartment) (if equipped)

3.3.3: Steering Wheel

The steering wheel can be tilted upward or downward for rider preference. Lift and hold the steering wheel adjustment lever while moving the steering wheel upward or downward. Release the lever when the steering wheel is at the desired position. Always make sure the steering wheel position does not impede proper operation of the brake pedal, throttle pedal and all other controls.

3.3.4: Ignition Switch

The ignition switch 3 is a three-position, key-operated switch. The key can be removed from the switch when it is in the OFF position.

OFF The engine is off. Electrical circuits are off.
ON Electrical circuits are on. Electrical equipment can be used.
START Turn the key to the START position to engage the electric starter. The key returns to the ON position when released.

3.3.5: Gear Selector

To change gears, stop the vehicle, and with the engine idling, move the lever 4 to the desired gear. Do not attempt to shift gears with engine speed above idle or while the vehicle is moving.

  • H: High Gear

  • L: Low Gear

  • N: Neutral

  • R: Reverse

  • P: Park

Low gear is the primary driving range for the RANGER. High gear is intended for use on hard-packed surfaces with light loads. Whenever the vehicle is left unattended, always place the transmission in PARK.

TIP
Maintaining shift linkage adjustment is important to assure proper transmission function. Your POLARIS dealer can assist in resolving any shifting problems.
NOTICE

Do not attempt to shift the transmission while the vehicle is moving or damage to the transmission could result. Always shift when the vehicle is stationary and the engine is at idle.

3.3.6: Switches

Not all switches are present on every model.

3.3.6.1: Light Switch

The ignition switch key must be in the ON/RUN position to operate the headlights. Press the top of the rocker switch toward the dash to place the headlights on high beam. Move the rocker switch to the center position to place the headlights on low beam. Press the bottom of the rocker switch to turn off the headlights.

3.3.6.2: AWD Switch

  • The AWD switch has three positions: All Wheel Drive (AWD), Differential Lock/Two Wheel Drive (2WD) and Off (1WD / Turf Mode).

  • Press the top of the switch to engage All Wheel Drive (AWD).

  • Move the switch to the center position to lock the differential and operate in two wheel drive (2WD).

  • Press the bottom of the switch to unlock the differential and allow the rear drive wheels to operate independently (1WD / Turf Mode). This mode of operation is well suited to turf driving or when active traction is not needed.

3.3.6.3: Polaris 3-Mode Throttle Control Switch

The Polaris 3-Mode Throttle Control Switch has three positions:

  • Performance (PERF)

  • Standard (STND)

  • Work (WORK)

  • Always use low gear for any of the following conditions regardless of the selected throttle control setting.

  • Operating in rough terrain or over obstacles.

  • Loading the vehicle onto a trailer.

  • Towing heavy loads.

  • Driving frequently at low RPM or at ground speeds below 7 MPH (11 km/h).

3.3.6.4: Active Descent Control (ADC) Switch (if equipped)

The ADC system allows engine braking to all four wheels when the vehicle descends a hill or incline. Press the top of the switch to engage ADC. Press the bottom of the switch to turn off ADC. Always operate in low gear and engage ADC before ascending or descending a hill.

3.3.6.5: HVAC Control Panel (if equipped)

To operate the cab heater, rotate the fan control1 to the desired fan speed setting. The far left setting turns the fan off.
Adjust the temperature by rotating the temperature control 2 to the desired heat setting. Rotate the control clockwise to increase heat or counter-clockwise to decrease heat.
Press the top of the A/C switch 3 to enable the air conditioning system for cooling or defrost purposes.

3.3.6.6: Windshield Wiper and Washer (if equipped)

The windshield wiper and washer switches are located on the wiper motor centered above the windshield. The windshield washer fluid reservoir is located under the hood.

Wiper Switch

  • Press the top of the wiper switch for a fast wiper speed.

  • Move the rocker switch to the center position for a slow wiper speed.

  • Press the bottom of the switch to turn the wiper off.

Washer Switch

  • Press and hold the top of the washer switch to spray washer fluid on the windshield.

  • Release the switch to end the spray.

3.3.6.7: Window Switches (if equipped)

Electric window switches (if equipped) can be found on the front driver and passenger doors.

3.3.7: Auxiliary Outlet

The vehicle is equipped with a 12-volt accessory outlet on the dash. Use the outlet to power an auxiliary light or other optional accessories or lights. For service, the dash outlet connection is under the dash.

3.3.8: Foot Pedals

3.3.8.1: Brake Pedal

Depress the brake pedal 1 to slow or stop the vehicle. Apply the brakes while starting the engine.

When the brake pedal is depressed, the brake light comes on. Check the brake light before each ride.

  1. Turn the ignition switch to the ON position.

  2. Apply the brakes. The brake light should come on after about 10 mm (0.4 in.) of pedal travel.

3.3.8.2: Throttle Pedal

Push the throttle pedal 2 down to increase engine speed. Spring pressure returns the pedal to the rest position when released. Always check that the throttle pedal returns normally before starting the engine.

TIP
If the throttle pedal and brake pedal are applied simultaneously, engine power may be limited.

3.3.9: Seat

3.3.9.1: Seat Belts

This vehicle is equipped with three-point lap and diagonal seat belts for the operator and any passengers. Always make sure the seat belts are secured for all riders before operating. The driver’s seat belt is equipped with a seat belt interlock. Vehicle speed will be limited to 15 MPH (24 km/h) if the seat belt is not secured.

WARNING
Falling from a moving vehicle could result in serious injury or death. Always fasten your seat belt securely before operating or riding in the vehicle.

To wear the seat belt properly, follow this procedure:

  1. For 3-point belts, pull the seat belt latch 1 downward and across your chest toward the buckle at the inner edge of the seat. The belt should fit snugly across your hips and diagonally across your chest. Make sure the belt is not twisted.

  2. Push the latch plate 1 into the buckle 2 until it clicks.

  3. Release the strap, it will self tighten.

  4. To release the seat belt, press the square red button in the buckle’s center.

3.3.9.2: Seat Belt Inspection

WARNING
Failure to perform regular inspection can reduce the effectiveness of the seat belt during a crash and could result in serious injury or death.

Inspect all seat belts for proper operation before each use of the vehicle.

  1. Push the latch plate into the buckle until it clicks. The latch plate must slide smoothly into the buckle. A click indicates that it's securely latched.

  2. Push the red release latch in the middle of the buckle to make sure it releases freely.

  3. Pull each seat belt completely out and inspect the full length for any damage, including cuts, wear, fraying or stiffness. If any damage is found, or if the seat belt does not operate properly, have the seat belt system checked and/or replaced by an authorized dealer.

  4. To clean dirt or debris from the seat belts, sponge the straps with mild soap and water. Do not use bleach, dye or household detergents. Rinse the entire length of the belt webbing. Use a garden hose to flush out the retractor and latch housings regularly.

3.3.9.3: Seat and Storage Compartments

The electrical compartment is located under the center rear-most seat. Never use this area for storage. Storage compartments are located under all other seats. Remove the storage bin under the right rear-most passenger seat to access the battery.

Always make sure all seats are properly installed before operating. Push down firmly on the rear of each seat until the latch pins are fully seated into the grommets.

Driver’s Seat

To access the storage area under the driver’s seat, reach behind the driver’s seat and pull up on the latch. Roll the bottom of the seat forward toward steering wheel.

Passenger’s Seat

To access the storage area under the passenger seat, lift up on the front of the passenger seat and raise it to the upright position.

3.3.10: Electronic Power Steering
(if equipped)

Electronic power steering (EPS) engages when the ignition key is turned to the ON position. EPS remains engaged whether the vehicle is moving or idle. To conserve battery power, the EPS will shut down 5 minutes after the engine is stopped if the key remains in the ON position. The EPS warning indicator will illuminate to indicate the EPS has shut down. Turn the key off and on to reset the unit. If the light remains on after starting the engine, the EPS system is inoperative. See your POLARIS dealer, or other qualified person, as soon as possible for repair. Continued operation could result in permanent damage to the EPS unit and increased steering effort.

3.3.11: Fuel Cap

The fuel tank filler cap 1 is located on the left-hand side of the vehicle near the driver’s seat. When refueling, always use either leaded or unleaded gasoline with a minimum pump octane number of 87 R+M/2 octane. Do not use fuel with ethanol content greater than 10 percent, such as E-85 fuel.

Always ensure that the fuel tank filler cap is fully tightened and secure before operating or transporting the vehicle.

3.3.12: Rollover Protective Structure (ROPS)

The Rollover Protective Structure (ROPS) on this vehicle meets OSHA® 1928.53 rollover performance requirements. Always have your authorized dealer thoroughly inspect the ROPS if it ever becomes damaged in any way.

No device can assure occupant protection in the event of a rollover. Always follow all safe operating practices outlined in this manual to avoid vehicle rollover.

WARNING
Vehicle rollover could cause severe injury or death. Always avoid operating in a manner that could result in vehicle rollover.

3.3.13: Hood Latches

To remove the hood, rotate the hood latches 1 1/4-turn and lift the hood away from the vehicle.

3.3.14: Rear Window Panel (if equipped)

Window Removal

  1. Rotate the upper window latches 1 counter-clockwise to release the locks.

  2. Tilt the upper edge of the window slightly outward and free the lower window brackets 2 from the frame, then carefully lift the window up and away from the vehicle.

  3. Secure the upper window latches.

  4. To prevent damage to the window during storage, store it in an upright position in a secure area. Place the lower frame of the window on wood or another semi-soft surface.

Window Installation

  1. Rotate the upper window latches counter-clockwise to release the locks.

  2. From the rear of the cab, place the lower edge of the window into the window opening, hooking the lower window brackets over the frame of the vehicle inside the cab.

  3. Align the upper edge of the window to the window opening.

  4. Secure the upper window latches.

3.3.15: Lighting Bar Connectors (if equipped)

The lighting bar harness connectors (if equipped) can be found on the front 1 and rear 2 of the interior roof of your vehicle. These plugs allow for easy setup of front and rear light bars. Follow the light bar installation instructions that accompany your accessory light bar. Remove the service cap 3 before installation.

NOTICE
If light bar is not used, make sure service caps remain installed on the light bar connectors.

3.3.16: Trailer Hitch Bracket

This vehicle is equipped with a receiver hitch bracket for a trailer hitch. Trailer towing equipment is not supplied with this vehicle.

To avoid injury and property damage, always heed the warnings and towing capacities.

3.3.17: Instrument Cluster

NOTICE
High water pressure may damage components. Wash the vehicle by hand or with a garden hose using mild soap. Certain products, including insect repellents and chemicals, will damage the speedometer lens and other plastic surfaces. Do not use alcohol to clean the instrument cluster. Do not allow insect sprays to contact the lens. Immediately clean off any gasoline that splashes on the instrument cluster.

  • 1 Speedometer

  • 2 Tachometer

  • 3 Indicator Lamps

  • 4 Mode Button

  • 5 Toggle Buttons

  • 6 Rider Information Center

3.3.17.1: Speedometer

The speedometer displays vehicle speed in either miles per hour (MPH) or kilometers per hour (km/h).

3.3.17.2: Tachometer

The tachometer displays engine speed in revolutions per minute (RPM).

3.3.17.3: Mode and Toggle Buttons

Press and hold the MODE button 4 to enter or exit the settings menu. Press and release the MODE button to cycle through Area 1 modes and to select an item.

Press and release either toggle button 5 to cycle through the options menu or Area 2 modes. Press and hold either toggle button to reset an item. See Gauge Settings Menu.

TIP
With the ignition key off, pressing the MODE button or either toggle button will power up the Rider Information Center for 10 seconds to allow viewing of the odometer and the clock.

3.3.17.4: Indicator Lamps

Lamp Indicates Condition
Vehicle Speed When standard mode is selected, speed displays in miles per hour.
When metric mode is selected, speed displays in kilometers per hour.
Over Temperature This lamp illuminates to indicate an overheated engine. If the indicator flashes, the overheating condition remains, and the system will automatically reduce engine power.
Electric Power Steering (EPS) Warning (if equipped) This indicator illuminates briefly when the key is turned to the ON position. If the light remains on, the EPS system is inoperative. See your POLARIS dealer, or other qualified person, as soon as possible for repair. Continued operation could result in permanent damage to the EPS unit and increased steering effort.
Neutral This lamp illuminates when the transmission is in neutral and the ignition key is in the ON position.
High Beam This lamp illuminates when the headlamp switch is set to high beam.
Helmet/Seat Belt This lamp is a reminder to the operator to ensure all riders are wearing helmets and seat belts before operating. The driver’s seat belt is equipped with a seat belt interlock. Vehicle speed will be limited to 15 MPH (24 km/h) if the seat belt is not secured.
Check Engine This indicator appears if an Electronic Fuel Injection (EFI) related fault occurs. Do not operate the vehicle if this warning appears. Serious engine damage could result. Your authorized dealer or qualified person can assist.
Check Battery This warning usually indicates that the vehicle is operating at an RPM too low to keep the battery charged. It may also occur when the engine is at idle and high electrical load (lights, cooling fan, accessories) is applied. Drive at a higher RPM or recharge the battery to clear the warning.
Low Fuel This lamp illuminates when fuel level in the fuel tank is low.
Speed Key (optional accessory) Information about the speed key is provided in the accessory kit.

3.3.18: Rider Information Center

1 Gear Indicator This indicator displays gear shifter position.
H = High Gear
L = Low Gear
N = Neutral
R = Reverse Gear
P = Park
-- = Gear Signal Error (or shifter between gears)
2 AWD Indicator This indicator shows whether 2X4 or AWD is active.
3 Service Indicator A flashing wrench symbol alerts the operator that the preset service interval has been reached. Your POLARIS dealer, or other qualified person, can provide scheduled maintenance. See Programmable Service Interval for resetting instructions.
4 Fuel Gauge The segments of the fuel gauge show the level of fuel in the fuel tank. When the last segment clears, a low fuel warning is activated. The outline of the fuel display will flash. Refuel immediately.
5 Speed Limitation (if equipped) This vehicle may be equipped with a maximum speed limitation function. This would be displayed on the screen as “LIM” followed by the speed. “LIM 30” for example.

  • The rider information center is located in the instrument cluster. All segments will light up for one second at start-up.

  • If the instrument cluster fails to illuminate, a battery over-voltage may have occurred and the instrument cluster may have shut off to protect the electronic speedometer. If this occurs, your POLARIS dealer, or other qualified person, can provide proper diagnosis.

  • The information center is set to display standard units of measurement and a 12-hour clock at the factory. To change to metric and/or a 24-hour clock hold the mode button and cycle to the clock menu. Use the directional arrows to change the clock settings.

3.3.18.1: Mode Information Displays

The rider information center contains three areas that display mode information.



1 Area 1 Modes Description
Engine Temperature Temperature of engine coolant
Vehicle Speed Speed of vehicle
Tachometer Engine speed (RPM)
2 Area 2 Modes Description
Odometer The odometer records and displays the distance traveled by the vehicle.
Trip Meters (T1/T2) A trip meter records the distance traveled by the vehicle if reset before each trip. To reset, see Trip Meter.
Engine Hours Total hours of engine operation since manufacture
Service Hours A flashing wrench symbol indicates that the preset service interval has been reached. To reset, see Programmable Service Interval.
Trip Time Time length of vehicle operation since mode was last reset
3 Area 3 Modes Description
Clock The clock displays time in a 12-hour or 24-hour format. To reset, see Clock.

3.3.18.2: Accessing Menus and Options

3.3.18.2.1: Gauge Settings Menu

Press and release the MODE button to cycle through the Area 1 modes until the desired default mode displays. See the Mode Information Displays section for details.

Press and hold the MODE button to enter the settings menu.

The OPTIONS screen will display for a few seconds.

  1. Press and release either toggle button to cycle to the desired option.

  2. Press MODE to select the option.

  3. Press either toggle button to cycle to the desired setting.

  4. Press MODE to save and exit to the settings menu.

  5. Press and hold the MODE button to exit the settings menu.

3.3.18.2.2: Backlight Color

The information center backlight can be set to either blue or red.

  1. Press and hold the MODE button to enter the settings menu.

  2. Press either toggle button to cycle to the “BL COLOR” option. Press MODE to select.

  3. Press either toggle button to cycle to the desired setting.

  4. Press MODE to save and exit to the settings menu,

3.3.18.2.3: Backlight Brightness

The information center backlight can be set to either blue or red.

  1. Press and hold the MODE button to enter the settings menu.

  2. Press either toggle button to cycle to the “BL LEVEL” option. Press MODE to select.

  3. Press “UP” button to increase brightness. Press “DOWN” button to decrease brightness.

  4. Press MODE to select and exit to the settings menu.

3.3.18.2.4: Clock

The clock must be reset any time the battery has been disconnected or discharged.

  1. Press and hold the MODE button to enter the settings menu.

  2. Press either toggle button to cycle to the “CLOCK” option. Press MODE to select.

  3. Press either toggle button to cycle to the desired setting (12H or 24H). Press MODE to select.

  4. Press either toggle button to change each segment of the clock. Press MODE to accept a change and advance to the next segment.

3.3.18.2.5: Display Units (Standard/Metric)

  1. Press and hold the MODE button to enter the settings menu.

  2. Press either toggle button to cycle to the desired “UNITS” option (distance, temperature or volume). Press MODE to select.

  3. Press either toggle button to cycle to the desired setting.

  4. Press MODE to save and exit to the settings menu.

3.3.18.2.6: Trip Meter

Use a trip meter to track the distance traveled during a specific trip or period of time. Reset the meter to zero before traveling.

  1. Press either toggle button to cycle to the desired trip meter option (T1 or T2).

  2. Press and hold either toggle button until the meter resets to zero.

3.3.18.2.7: Trip Time

Use a trip time meter to track the travel time during a specific trip. Reset the meter to zero before traveling.

  1. Press either toggle button to cycle to the trip time option (TT).

  2. Press and hold either toggle button until the meter resets to zero.

3.3.18.2.8: Programmable Service Interval

The service interval counter is programmed to 25 hours at the factory. As hours of engine operation increase, the counter decreases. The wrench icon will flash for about 10 seconds when the counter reaches zero (0), and each time the key is turned on thereafter, until the counter is reset.

When this feature is enabled, it provides a convenient reminder to perform routine maintenance. Refer to the Periodic Maintenance Chart for recommended service intervals.

Use the following procedure to reset or change the service interval.

  1. Press and hold the MODE button to enter the settings menu.

  2. Press either toggle button to cycle to the “Service Hours” option. Press MODE to select.

  3. Press MODE to reset the existing value and exit, or press either toggle button to change the value. Press MODE to save and exit to the settings menu.

3.3.18.3: Engine Error Codes

The error screen displays only when the CHECK ENGINE indicator is on or when it goes on and off during one ignition cycle. Error codes are not stored. When the key is turned OFF, the code and message is lost, but will reappear if the fault reoccurs after restarting the engine.

If the CHECK ENGINE lamp or the EPS lamp illuminates, retrieve the active error codes from the display.

  • 1 Failure Mode Indicator (FMI)
  • 2 Suspect Parameter Number (SPN)
  • 3 Code Count

  1. Press and hold the MODE button to enter the settings menu.

  2. Press either toggle button to cycle to the “DIAGCODE” option. Press MODE to select.

  3. More than one diagnostic code may be present. Press the toggle UP button to see if more codes are present. Press MODE to select a code.

    NOTICE
    If the displayed code is an engine fault code, the CHECK ENGINE lamp will blink. If the displayed code is an EPS fault code, the EPS lamp will blink.
  4. Record the three (3) numbers displayed.

  5. Press MODE to exit to the settings menu.

3.3.19: Ride Command Display

3.3.19.1: Overview

Thank you for purchasing a RIDE COMMAND Display, and welcome to the Polaris RIDE COMMAND App. This intuitive display gives you access to your vehicle’s custom information and a variety of features.

For a safe and enjoyable riding experience with your new Display, please read your vehicle’s owner’s manual and this Display owner’s manual. If you should need additional assistance with Display operation or software updates, please see your Polaris dealer or visit polaris.com/ridecommand.

For the latest information about your RIDE COMMAND Display, including software updates, please visit ridecommand.polaris.com.

WARNING
Do not enter information while operating your vehicle. Failure to pay attention to operating your vehicle could result in loss of control, injury, or death. You assume all risks associated with using this device. Read your User Guide. Always ride with the latest maps and trails data from https://ridecommand.polaris.com/en-us/update.

3.3.19.2: Touch Screen Display Compliance Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This device complies with FCC RF radiation exposure limits for general population.

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

  1. This device may not cause interference.

  2. This device must accept any interference, including interference that may cause undesired operation of the device.

CAUTION

This equipment complies with part 15 of the Federal Communications Commission (FCC) rules.

These requirements are intended to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.

  • Increase the separation between the equipment and receiver.

  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

  • Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

A copy of the Declaration of Conformity is available on request from Polaris:

1600 SE 18th Ave Battle Ground,
WA 98604
Phone: (844) 378-8143

3.3.19.3: Device Operating Requirements

Phone functionality is dependent on the capabilities of your cell phone.

NOTICE
Some cell phones or operating systems will not work as shown in this manual.

3.3.19.4: Before you Ride

Before riding with your new display, do the following:

  • Read this section and the Ride Command User Guide in their entirety.

  • Familiarize yourself with the features and operations of the display while the vehicle is stationary.

  • Download the Polaris RIDE COMMAND App from the Apple® App Store® or Google Play® store and create your personalized account.

  • Check your display to ensure you have the appropriate maps and trails visible for your area. To change or update maps/trails see Update Maps.

  • Check https://www.polaris.com/en-us/owners-manuals/ for the latest updates to the owner’s manual.

NOTICE
Trails change often, and the trail data file is only considered valid for 90 days after the release date. Please keep your trail data up to date. Download the latest trails at https://ridecommand.polaris.com/display
NOTICE
Using the display for an extended period of time while the vehicle’s engine is off can drain the battery.

3.3.19.5: Quick Start Guide

  • 1 Ride Command Buttons

  • 2 Driveline Mode

  • 3 Gear Status

  • 4 Battery/Temperature/Turbo (if equipped)

  • 5 Fuel Gauge

  • 6 Icon Bar

  • 7 Settings

  • 8 Speedometer/Odometer



NOTICE
For the latest software and more information go to https://ridecommand.polaris.com/en-us/update.
Ride Command Buttons

Button Description Function
Menu/Power Button Press the Menu/Power button to access the settings. To reboot the display, press and hold for 5 seconds.
Gauge Screen Button Press the Gauge Screen button to select from available screens.
Map Button Press the Map button to access the map, manage your rides and waypoints, and to see your friends on the map with Group Ride.
Phone Button Press the Phone button to access your Bluetooth®-connected phone, including recent calls, contacts, dialer, and messages.
Audio Button Press the Audio button to access the Radio, Weather, USB, and connected Bluetooth® music interface
Volume Decrease Button Press the Volume Decrease button to decrease the volume. Press and hold to mute volume.
Volume Increase Button Press the Volume Increase button to increase the volume.

Driveline Mode

Indicator Description Function
2WD When the switch is on 2X4, the ATV is in two-wheel drive at all times.
AWD When in All-Wheel Drive, the demand drive unit will automatically engage any time the rear wheels lose traction. When the rear wheels regain traction, the demand drive unit will automatically disengage. There is no limit to the length of time the vehicle may remain in 4X4. The vehicle automatically engages 4X4 when operating in reverse if the switch is set to 4X4 position.
Turf Mode (if equipped) When operating in TURF mode, the inside rear wheel will rotate independently from the outside wheel during turns. Operate in TURF mode only as needed to protect smooth, level surfaces from tire damage. DO NOT operate in TURF mode when climbing or descending hills, when sidehilling, or when operating on uneven, loose, or slippery terrain such as sand, gravel, ice, snow, obstacles, and water crossings. Always operate in AWD on these types of terrain.

Gear Status

The vehicle’s current gear is displayed in the upper left-hand corner.

  • H: High Gear

  • L: Low Gear

  • N: Neutral Gear

  • R: Reverse

  • P: Park

Battery/Temperature/Turbo

Press the Battery/Temperature/Turbo icon to toggle between battery voltage, engine temperature, and turbo meter.

Indicator Description Function
Battery Voltage The meter displays battery’s current voltage.
Engine Temperature The meter displays the vehicle’s current engine temperature.
Turbo (if equipped) If your vehicle is equipped with turbo, The meter will display the proportional amount of boost pressure (intake manifold pressure) relative to the maximum pressure possible.
Fuel Level

The fuel gauge displays the vehicle current fuel level. Fuel level will turn red when low fuel condition occurs.

Icon Bar

Icon Description Function
Signal Strength Displays current cell signal strength.
Headset Displays icon if headset is connected.
Vehicle Direction Displays vehicle direction
Ambient Temperature Displays ambient temperature.
Clock Displays current time.

3.3.19.6: Update Software

NOTICE
Before updating the display, always export your existing rides and waypoints to a USB drive to avoid losing them.

To update the software, do the following:

Download Software onto your Personal Computer
  1. Go to ridecommand.polaris.com/display .

  2. Log into your account, or create a new account.

  3. Using the Vehicle Identification Number (VIN), add your new Polaris vehicle to your Garage.

  4. Locate and download the latest software to a USB flash drive (8+ GB).

Upload Software on your Vehicle
  1. Connect the USB flash drive to the USB cable and power up your vehicle.

  2. On the RIDE COMMAND display, select the Settings menu on your display by pressing the POLARIS icon at the top of the screen.

  3. Select General Settings, then Update Software.

  4. Select the file you wish to load (use date listed in the file name to determine most recent file).

  5. Select Yes to restart display (restart required).

Error Messages

If an error occurs while updating your software, perform one or all of the following actions to resolve the issue:

  1. Remove and reconnect the USB flash drive securely.

  2. Make sure the display files are not inside a folder on the flash drive.

  3. Make sure only display files are on the flash drive. Remove any other files if necessary.

  4. Try using a different USB flash drive.

3.3.19.7: Update Maps

To update the maps on your display, do the following:

  1. Go to ridecommand.polaris.com/display and download the map update to a USB flash drive.

  2. Insert USB flash drive into the USB port on your vehicle.

  3. Press the Update maps in the General Settings.

  4. Select the file you want to install by pressing the corresponding down arrow icon.

  5. This will update the display’s map which will automatically restart the display once the update is complete. Do not remove the USB flash drive until the display has fully restarted.

3.3.19.8: USB Hardware

Software Updates

For software update, POLARIS recommends using a SanDisk® or similar USB flash drive with a minimum of 4GB in available memory, formatted using the FAT32 or exFAT® file systems. For best results remove all files from the flash drive before starting the update process.

Map Updates

For Map updates, a 32GB USB drive is required (USB 3.0 drive is highly recommended) USB drive must be formatted to exFAT® before copying the map file onto it.

Trail Updates

For Trail updates, a 4GB drive formatted to FAT32 can be used.

Chapter 4: Operation

4.4.1: Important Information

WARNING

Failure to operate the vehicle properly can result in a collision, loss of control, accident or rollover, which may result in serious injury or death. Read and understand all safety warnings outlined in the safety section of this owner’s manual.

4.4.2: Vehicle Break-in Period

The break-in period for your new vehicle is the first 25 hours of operation, or the time it takes to use the first 2 full tanks of gasoline. No single action on your part is as important as a proper break-in period. Careful treatment of a new engine will result in more efficient performance and longer life for the engine. Perform the following procedures carefully.

NOTICE

Excessive heat build-up during the first 3 hours of operation will damage close-fitted engine parts and drive components. Do not operate at full throttle or high speeds during the first 3 hours of use.

4.4.3: Engine and Drivetrain Break-in

  1. Fill the fuel tank with gasoline. Always exercise extreme caution whenever handling gasoline.

  2. Check the oil level. Add the recommended oil as needed to maintain the oil level in the safe operating range.

  3. Complete the New Operator Driving Procedures.

  4. Avoid aggressive use of the brakes.

  5. Vary throttle positions. Do not operate at sustained idle.

  6. Pull only light loads.

  7. Perform regular checks on fluid levels, controls and areas outlined on the daily pre-ride inspection checklist.

  8. During the break-in period, change both the oil and the filter at 25 hours or one month.

  9. Check fluid levels of transmission and all gearcases after the first 25 hours of operation and every 100 hours thereafter.

4.4.4: Brake System Break-in

Apply only moderate braking force for the first 50 stops. Aggressive or overly forceful braking when the brake system is new could damage brake pads and rotors.

4.4.5: PVT Break-in (Clutches/Belt)

Always break in the clutches and drive belt of new vehicles, as well as after a belt replacement.

A proper break-in of the clutches and drive belt will ensure a longer life and better performance. Break in the clutches and belt by operating at slower speeds during the break-in period as recommended. Pull only light loads. Avoid aggressive acceleration and high speed operation during the break-in period.

If a belt fails and you need to replace it, always clean all debris from the PVT intake and outlet duct, the clutch, and the engine components.

4.4.6: Pre-Ride Inspection

WARNING
Failure to inspect and verify that the vehicle is in safe operating condition before operating increases the risk of an accident. Always inspect the vehicle before each use to make sure it's in safe operating condition.
Item Remarks Page
Brake system/pedal travel Ensure proper operation Brakes
Brake fluid Ensure proper level Brakes
Front suspension Inspect, lubricate if necessary Lubrication Recommendations
Rear suspension Inspect, lubricate if necessary Lubrication Recommendations
Steering Ensure free operation -
Tires Inspect condition and pressure Tires
Wheels/fasteners Inspect, ensure fastener tightness Tires
Frame nuts, bolts, fasteners Inspect, ensure tightness -
Drive Belt Inspect, ensure installed correctly -
Fuel and oil Ensure proper levels Engine Oil
Coolant level Ensure proper level Cooling System
Coolant hoses Inspect for leaks -
Throttle Ensure proper operation Throttle Pedal
Indicator lights/switches Ensure proper operation Indicator Lamps
Switches
Intake pre-filters Inspect, clean -
Headlamps Check operation, apply POLARIS dielectric grease when lamp is replaced Lights
Brake light/tail lamps Check operation -
Seat Latch Push down on the seat back to ensure the latch is secure -
Seat Belt Check length of belt for damage, check latches for proper operation Seat Belts
Cab Doors (if equipped) Check doors and latches for wear or damage. -
Grass and leaves Remove grass, leaves, foreign matter, and other flammable material or debris, especially near the exhaust system. -

4.4.7: Safe Operation Practices

  1. Visit the Recreational Off-Highway Vehicle Association® web site and take the free on-line training course. Complete the recommended safety training before operating this vehicle. Visit www.rohva.org or call 866-267-2751.

  2. Do not allow anyone under 16 years of age or without a valid driver’s license to operate this vehicle.

  3. Engine exhaust fumes are poisonous and can cause loss of consciousness or death in a short time. Never start the engine or let it run in an enclosed area.

  4. Never operate with accessories not approved by POLARIS for use on this vehicle.

  5. Operate this vehicle off-road only. Never operate this vehicle on any public street, road or highway, including dirt and gravel roads (unless designated for off-highway use).

  6. Use caution and drive at reduced speeds in conditions of reduced visibility such as fog, rain and darkness. Clean headlights frequently and replace burned out headlamps promptly.

  7. Always operate at a speed that's appropriate for the terrain, the visibility and operating conditions and your skills and experience. Never operate at excessive speeds. Never attempt wheelies, jumps, or other stunts. Keep both hands on the steering wheel during operation.

  8. Never consume alcohol or drugs before or while operating this vehicle.

  9. Always use the size and type of tires specified for your vehicle. Always maintain proper tire pressure.

  10. Never operate a damaged vehicle. After any rollover or accident, have a qualified service dealer inspect the entire machine for possible damage.

  11. Never operate the vehicle on a frozen body of water unless you have first verified that the ice is sufficiently thick to support the weight and moving force of the vehicle, you and your cargo, together with any other vehicles in your party.

  12. Do not touch hot exhaust system components. Always keep combustible materials away from the exhaust system.

  13. Always remove the ignition key when the vehicle is not in use to prevent unauthorized use.

4.4.8: Know Your Riding Area/Tread LightlySM

Familiarize yourself with all laws and regulations concerning the operation of this vehicle in your area. Respect the environment in which you ride your vehicle. Find out where the designated riding areas are by contacting your POLARIS dealer, a local riding club, or local officials.

Help keep our trails open for recreational vehicle use. As an off-road enthusiast, you represent the sport and can set a good example (or a poor example) for others to follow. Tread LightlySM. Operate with respect for the terrain, avoid littering, and always stay on the designated trails.

4.4.9: Trail Etiquette

Always practice good etiquette when riding. Allow a safe distance between your vehicle and other vehicles operating in the same area. Communicate to oncoming operators by signaling the number of vehicles in your group. When stopping, move your vehicle to the edge of the trail as far as possible to allow others to pass safely.

4.4.10: Starting the Engine

  1. Position the vehicle on a level surface outdoors or in a well ventilated area.

  2. Sit in the driver's seat and fasten the seat belt. Secure the cab doors (if equipped).

  3. Place the transmission in PARK.

  4. Apply the brakes. Do not press the throttle pedal while starting the engine.

  5. Turn the ignition key past the ON/RUN position to START. Engage the starter for a maximum of five seconds. Release the key when the engine starts.

  6. If the engine does not start within five seconds, return the ignition switch to the OFF position and wait five seconds. Repeat steps 5 and 6 until the engine starts.

  7. Vary the engine RPM slightly with the throttle to aid in warm up until the engine idles smoothly.

NOTICE
Operating the vehicle immediately after starting could cause engine damage. Allow the engine to warm up for several minutes before operating the vehicle.

4.4.11: Using Low Gear

Low gear is the primary driving range for the RANGER. High gear is intended for use on hard-packed surfaces with light loads. Whenever the vehicle is left unattended, always place the transmission in PARK.

Always shift into low gear for any of the following conditions.

  • Operating in rough terrain or over obstacles

  • Loading the vehicle onto a trailer

  • Towing heavy loads

  • Driving slowly - under 10 MPH (16 km/h)

  • Climbing hills

4.4.12: Cold Weather Operation

If the vehicle is used year-round, check the oil level frequently. A rising oil level could indicate the accumulation of contaminates such as water or excess fuel in the bottom of the crankcase. Water in the bottom of the crankcase can lead to engine damage and must be drained. Water accumulation increases as outside temperature decreases.

4.4.13: Stopping the Engine

  1. Release the throttle pedal completely and brake to a complete stop.

  2. Place the transmission in PARK.

  3. Turn the key to the OFF position.

  4. Slowly release the brake pedal and make sure the transmission is in PARK before exiting the vehicle.

WARNING
A rolling vehicle can cause serious injury. Always place the transmission in PARK before stopping the engine.

4.4.14: Braking

  1. Release the throttle pedal completely.

    NOTICE
    When the throttle pedal is released completely and engine speed slows to near idle, the vehicle has no engine braking.
  2. Press on the brake pedal evenly and firmly. Practice starting and stopping (using the brakes) until you're familiar with the controls.

4.4.15: Parking the Vehicle

  1. Stop the vehicle on a level surface. When parking inside a garage or other structure, be sure that the structure is well ventilated and that the vehicle is not close to any source of flame or sparks, including any appliance with pilot lights.

  2. Place the transmission in PARK.

  3. Turn the engine off.

  4. Engage the parking brake (if equipped).

  5. Slowly release the brake pedal and make sure the transmission is in PARK before exiting the vehicle.

  6. Remove the ignition key to prevent unauthorized use.

4.4.16: Driving Procedures

4.4.16.1: New Operator Driving Procedures

  1. Read and understand the owner's manual and all warning and instruction labels before operating this vehicle.

  2. Visit the Recreational Off-Highway Vehicle Association® web site and take the free on-line training course. Visit www.rohva.org or call 866-267-2751. Hands-on training is also available through ROHVA®.

  3. Perform the pre-ride inspection.

  4. Do not tow or carry cargo during this period.

  5. Select an open area that allows room to familiarize yourself with vehicle operation and handling.

  6. The driver must wear helmet, eye protection, gloves, long-sleeve shirt, long pants, over-the-ankle boots and seat belt at all times.

  7. Sit in the driver's seat and fasten the seat belt.

  8. Always make sure all cab doors are closed and latched when riding in this vehicle.

  9. Place the transmission in PARK.

  10. Start the engine.

  11. Apply the brakes and shift into low gear.

  12. Check your surroundings and determine your path of travel.

  13. Keeping both hands on the steering wheel, slowly release the brakes and depress the throttle with your right foot to begin driving.

  14. Drive slowly at first. On level surfaces, practice starting, stopping, turning, maneuvering, using the throttle and brakes and driving in reverse. Learn how the vehicle handles when making both left and right turns at a slow speed.

    WARNING
    Operating in TURF mode (if equipped) when on sloped, uneven, or loose terrain could cause loss of control and result in serious injury or death. One rear wheel may slip and lose traction or may lift up and grab when it touches the ground again.
  15. Increase speed only after mastering all maneuvers at a slow speed.

  16. After you become skilled at making turns and begin to operate at faster speeds, follow these precautions:

    • Avoid sharp turns.

    • Never turn while applying heavy throttle.

    • Never make abrupt steering maneuvers.

    • Operate at speeds appropriate for your skills, the conditions and the terrain.

    • DO NOT do power slides, “donuts”, jumps or other driving stunts.

4.4.16.2: Driving with a Passenger

  • Perform the pre-ride inspection.

  • Make sure all passengers are at least 12 years of age and tall enough to comfortably and safely sit in a passenger seat with the seat belt secured, put both feet on the floor and grasp the hand hold.

  • Make sure all passengers are wearing helmets, eye protection, gloves, long-sleeve shirt, long pants and over-the-ankle boots.

  • Make sure all cab nets or doors (if equipped) are properly secured.

  • Do not carry more than the recommended number of passengers for your vehicle.

  • Allow a passenger to ride only in a passenger seat.

  • Slow down. Always travel at a speed appropriate for your skills, your passengers’ skills, and operating conditions. Avoid unexpected or aggressive maneuvers that could cause discomfort or injury to a passenger.

  • Vehicle handling may change with a passenger and/or cargo on board. Allow more time and distance for braking.

  • Always follow all operating guidelines as outlined on safety labels and in this manual.

4.4.16.3: Driving on Slippery Surfaces

WARNING
Skidding or sliding can cause loss of control or rollover (if tires regain traction unexpectedly). When operating on slippery surfaces such as ice or loose gravel, reduce speed and use extra caution to reduce the chance of skidding or sliding out of control. Do not operate on excessively slippery surfaces.

When driving on slippery surfaces such as wet trails, loose gravel, or ice, be alert for the possibility of skidding and sliding. Follow these precautions when encountering slippery conditions:

  • Do not operate on excessively rough, slippery or loose terrain.

  • Slow down before entering slippery areas.

  • Maintain a high level of alertness, reading the trail and avoiding quick, sharp turns, which can cause skids.

  • Engage all-wheel drive before wheels begin to lose traction.

    NOTICE
    Severe damage to the drive train may occur if the AWD is engaged while the wheels are spinning. Always allow the wheels to stop spinning before engaging AWD.
  • Correct a skid by turning the steering wheel in the direction of the skid. Never apply the brakes during a skid.

4.4.16.4: Driving Over Obstacles

Follow these precautions when operating over obstacles:

  • Always check for obstacles before operating in a new area.

  • Look ahead and learn to read the terrain. Be constantly alert for hazards such as logs, rocks and low hanging branches.

  • Travel slowly and use extra caution when operating on unfamiliar terrain. Not all obstacles are immediately visible.

  • Move the gear selector to Low Gear, if needed.

  • Avoid operating over large obstacles such as large rocks and fallen trees. If unavoidable, use extreme caution and operate slowly.

  • Always have all passengers dismount and move away from the vehicle before operating over an obstacle that could cause a rollover.

4.4.16.5: Driving Uphill

Whenever traveling uphill, follow these precautions:

  • Avoid excessively steep hills.

  • ADC Models: Always operate in low gear and engage ADC 4X4 before ascending or descending a hill.

  • Always travel straight uphill.

  • Keep both feet on the floor.

  • Always check the terrain carefully before ascending any hill. Never climb hills with excessively slippery or loose surfaces.

  • Proceed at a steady rate of speed and throttle opening. Never open the throttle suddenly.

  • Never go over the crest of a hill at high speed. An obstacle, a sharp drop, or another vehicle or person could be on the other side of the hill.

4.4.16.6: Driving Downhill

When driving downhill, follow these precautions:

  • Avoid excessively steep hills.

  • ADC Models: Always operate in low gear and engage ADC 4X4 before ascending or descending a hill.

  • Drive straight downhill. Avoid descending a hill at an angle, which would cause the vehicle to lean sharply to one side. Travel straight downhill when possible.

  • Slow down.

  • Apply the brakes slightly to aid in slowing.

4.4.16.7: Active Descent Control (ADC) System
(if equipped)

The ADC system allows engine braking to all four wheels when the vehicle descends a hill or incline. The ADC system is automatically engaged when the transmission is in gear (high, low or reverse). The ADC system automatically disengages when the transmission is shifted to neutral or park.

See the Active Descent Control (ADC) Switch section for details on how to operate the ADC switch.

4.4.16.8: Driving on a Sidehill (Sidehilling)

Driving on a sidehill is not recommended. Improper procedure could cause loss of control or rollover. Avoid crossing the side of any hill unless absolutely necessary.

If crossing a sidehill is unavoidable, follow these precautions:

  • Slow down.

  • Exercise extreme caution.

  • Avoid crossing the side of a steep hill.

  • ADC Models: Always operate in low gear and engage ADC 4X4 before ascending or descending a hill.

4.4.16.9: Driving Through Water

Your vehicle can operate through water up to a maximum recommended depth equal to the floorboards.

If equipped with high mounted intakes, your vehicle can operate through standing water up to a height equal to the seat base level.

NOTICE
If your vehicle becomes immersed or is operated in water that exceeds the floor level, service is required before starting the engine. Your dealer can provide this service. If it's impossible to bring the vehicle in before starting the engine, perform the service outlined in the Spark Arrester section, and take the vehicle in for service at the first opportunity.

Follow these procedures when operating through water:

  1. Determine water depths and current before entering water.

  2. Choose a crossing where both banks have gradual inclines.

  3. Proceed slowly, avoiding rocks and obstacles.

  4. Avoid operating through deep or fast-flowing water.

    WARNING
    The large tires on your vehicle may cause the vehicle to float in deep or fast-flowing water, which could result in loss of control and lead to serious injury or death. Never cross deep or fast-flowing water with your vehicle
  5. After leaving water, always dry the brakes by applying light pressure to the pedal repeatedly until braking action is normal.

    NOTICE
    After running your vehicle in water, it's critical that you perform the services outlined in the Periodic Maintenance Chart. Give special attention to engine oil, transmission oil, front and rear gearcases (if equipped), and all grease fittings.

4.4.16.10: Driving in Reverse

Follow these precautions when operating in reverse:

  • Always check for obstacles or people behind the vehicle. Always inspect left and right fields of vision before backing.

  • Always avoid backing downhill.

  • Back slowly.

  • Apply the brakes lightly for stopping.

  • Avoid turning at sharp angles.

  • Never open the throttle suddenly.

4.4.16.11: Parking the Vehicle

To park the vehicle, do the following:

  1. Apply the brakes. Stop the vehicle on a level surface.

  2. When parking inside a garage or other structure, be sure that the structure is well ventilated and that the vehicle is not close to any source of flame or sparks, including any appliance with pilot lights.

  3. Place the transmission in PARK.

  4. Turn the engine off.

  5. Engage the park brake (if equipped).

  6. Slowly release the brake pedal and make sure the transmission is in PARK before exiting the vehicle.

  7. Remove the ignition switch key to prevent unauthorized use.

4.4.16.12: Parking on an Incline

Avoid parking on an incline if possible. If it's unavoidable, follow these precautions:

  1. Apply the brakes.

  2. Place the transmission in PARK.

  3. Engage the parking brake (if equipped).

  4. Turn the engine off.

  5. Slowly release the brake pedal and make sure the transmission is in PARK before exiting the vehicle.

  6. Block the rear wheels on the downhill side.

4.4.17: Hauling Cargo

WARNING

Overloading the vehicle or carrying or towing cargo improperly can alter vehicle handling and may cause loss of control or brake instability. Always follow these precautions when hauling cargo:

Never exceed the stated load capacity for this vehicle.

REDUCE SPEED AND ALLOW GREATER DISTANCES FOR BRAKING WHEN HAULING CARGO.

NEVER EXCEED THE MAXIMUM WEIGHT CAPACITY of the vehicle. When determining the weight you are adding to the vehicle, include the weight of the operator, passenger, accessories, loads in the rack or box and the load on the trailer tongue. The combined weight of these items must not exceed the maximum weight capacity.

Always load the cargo box with the load as far forward and as low as possible.

When operating over rough or hilly terrain, reduce speed and cargo to maintain stable driving conditions.

Always operate the vehicle with extreme care when hauling or towing loads. Slow down and drive in the lowest gear available.

SECURE ALL LOADS BEFORE OPERATING. Unsecured loads can create unstable operating conditions, which could result in loss of control of the vehicle.

OPERATE ONLY WITH STABLE AND SAFELY ARRANGED LOADS. When handling off-centered loads that cannot be centered, securely fasten the load and operate with extra caution.

Always attach the tow load to the hitch point designated for your vehicle.

HEAVY LOADS CAN CAUSE BRAKING AND CONTROL PROBLEMS. Use extreme caution when applying brakes with a loaded vehicle. Avoid terrain or situations that may require backing downhill.

USE EXTREME CAUTION when operating with loads that extend over the rack sides. Stability and maneuverability may be adversely affected, causing vehicle rollover.

DO NOT TRAVEL FASTER THAN THE RECOMMENDED SPEEDS. Vehicle should never exceed 10 MPH (16 km/h) while towing a load on a level grass surface. Vehicle speed should never exceed 5 MPH (8 km/h) when towing loads in rough terrain, while cornering, or while ascending or descending a hill.

If the vehicle is capable, never exceed 43 MPH (70 km/h) if total payload exceeds 335 lbs. (152 kg).

Carrying a passenger in the cargo box could result in a fall from the vehicle or contact with moving components. Never allow a passenger to ride in the cargo box.

Your vehicle has been designed to carry or tow specific capacities. Reduce speed and allow a greater distance for braking when carrying cargo.

Loads should be centered on the vehicle and carried as low as possible in the box. For stability on rough or hilly terrain, reduce both speed and cargo. Exercise caution if the cargo load extends over the side of the box.

Always read and understand the load distribution warnings listed on warning labels and in this manual. Never exceed the maximum capacities specified for your vehicle.

4.4.18: Belt Life

To extend belt life, use low gear when hauling or towing heavy cargo.

4.4.19: Towing Loads

WARNING
Towing improperly can alter vehicle handling and may cause loss of control or brake instability.

Always follow these precautions when towing:

  1. Never load more than 250 lbs. (113.4 kg) tongue weight on the towing bracket.

  2. When towing a disabled vehicle, place the disabled vehicle’s transmission in neutral. Do not operate the vehicle faster than 10 MPH (16 km/h) when towing.

  3. Towing a trailer increases braking distance. Do not operate the vehicle faster than 10 MPH (16 km/h) when towing.

  4. Do not tow more than the recommended weight for the vehicle.

  5. Attach a trailer to the trailer hitch bracket only. Do not attach a trailer to any other location, which could result in loss of control of the vehicle.

  6. The total load (operator, accessories, cargo and weight on hitch) must not exceed the maximum weight capacity of the vehicle.

MODEL Total Towed Load Weight
(Level Ground)
Total Towed Load Weight
(15° grade)
Total Hitch Vertical Weight Maximum Towing Speed
All RANGER XP 1000 models 2500 lbs.
(1134 kg)
850 lbs.
(386 kg)
250 lbs
(113.4 kg)
10 MPH
(16 km/h)

4.4.20: Dumping the Cargo Box

To dump the cargo box, do the following:

  1. Select a level site to dump the cargo box. Do not attempt to dump or unload the vehicle while parked on an incline.

  2. Apply the brakes.

  3. Shift the gear selector to the Park position.

  4. Turn the key to the off position.

  5. Dismount vehicle.

  6. Ensure that the cargo is positioned evenly or toward the front of the cargo box.

  7. Open the tailgate.

  8. Stand clear and pull up on the cargo box release lever.

  9. Lift the front of the cargo box to dump the cargo.

  10. Lower the cargo box and push down securely to latch.

  11. Close the tailgate.

    WARNING
    Operating the vehicle while the cargo box is raised could result in severe injury. The box could close unexpectedly and cause injury to the driver or passenger. The rear tires will also catch the rear of a raised box, damaging the vehicle and creating hazardous driving conditions. Never operate this vehicle with the cargo box in the raised position.

4.4.21: All Wheel Drive/Rear Differential System

If your model is equipped with a lockable differential, you can choose to operate with an open differential or a closed differential.

Engaging AWD

NOTICE
Switching to AWD while the rear wheels are spinning may cause severe drive shaft and clutch damage. Always switch to AWD while the rear wheels have traction or are at rest.

  • 1 All-Wheel Drive (AWD)

  • 2 Differential Lock

  • 3 Differential Unlock (Turf Mode)



Press the top of the switch to engage All Wheel Drive (AWD). The 4X4 indicator illuminates in the rider information center to indicate that the vehicle is in AWD. When the AWD switch is on, the front gearcase will automatically engage any time the rear wheels lose traction. When the rear wheels regain traction, the front gearcase will automatically disengage. There is no limit to the length of time the vehicle may remain in AWD. Initially, the vehicle's electronic system will not enable the AWD until the engine RPM is below 3100. Once enabled, the AWD remains enabled until the AWD switch is turned off. If the switch is turned off while the front gearcase is moving, it will not disengage until the rear wheels regain traction.

Engage the AWD before getting into conditions where front wheel drive may be needed. If the rear wheels are spinning, release the throttle before switching to AWD.

Disengaging AWD

Move the AWD switch to the center or bottom position to disengage AWD. If the switch is turned off while the front hubs are driving, they will not release until the rear wheels regain traction.

In some situations, the front gearcase may remain locked after turning the AWD switch off. If this occurs, you may notice increased steering effort and some vehicle speed restriction. Perform the following procedure to unlock the front gearcase.

To disengage AWD, do the following:

  1. Stop the vehicle.

  2. Operate in reverse for at least 10 ft (3 m).

  3. Stop completely.

  4. Shift into low gear and drive forward.

  5. If the front gearcase remains locked after following these instructions, see your dealer or other qualified service person for service.

Locking the Differential

Move the rocker switch to the center position to lock the differential and operate in two wheel drive (2WD). Locking the differential in slippery or low traction conditions helps improve traction. When the rear differential is locked, both rear wheels rotate at the same speed.

Unlocking the Differential (TURF Mode)

When operating in TURF mode, the inside rear wheel will rotate independently from the outside wheel during turns. Operate in TURF mode only as needed to protect smooth, level surfaces from tire damage. DO NOT operate in TURF mode when climbing or descending hills, when sidehilling, or when operating on uneven, loose, or slippery terrain such as sand, gravel, ice, snow, obstacles, and water crossings. Always operate in AWD on these types of terrain.

WARNING
Operating in TURF mode (if equipped) when on sloped, uneven, or loose terrain could cause loss of control and result in serious injury or death. One rear wheel may slip and lose traction or may lift up and grab when it touches the ground again.

Press the bottom of the switch to unlock the differential and allow the rear drive wheels to operate independently (1WD). When the rear differential is unlocked, the rear wheels can rotate at different speeds. Unlock the differential to make maneuvering easier and minimize damage to turf.

NOTICE
Damage to the differential can occur if it is engaged while the vehicle is traveling at high speeds or while the rear wheels are spinning. Slow the vehicle to nearly stopped before engaging the differential.
WARNING
Never operate in TURF mode (if equipped) while operating on a hill or other irregular terrain. Always move the AWD switch to AWD before ascending or descending a hill.

Chapter 5: Winch Guide

5.5.1: Winch Safety

These safety warnings and instructions apply if your vehicle came equipped with a winch or if you choose to add an accessory winch to your vehicle.

WARNING
Improper winch use can result in SEVERE INJURY or DEATH. Always follow all winch instructions and warnings in this manual.

Your winch may have a cable made of either wire rope or specially designed synthetic rope. The term “winch cable” will be used for either unless noted otherwise.

5.5.2: Winch Safety Precautions

  1. Read all sections of this manual.

  2. Never use alcohol or drugs before or while operating the winch.

  3. Never allow children under 16 years of age to operate the winch.

  4. Always wear eye protection and heavy gloves when operating the winch.

  5. Always keep body, hair, clothing and jewelry clear of the winch cable, fairlead and hook when operating winch.

  6. Never attempt to “jerk” a load attached to the winch with a moving vehicle. See the Shock Loading section on Shock Loading.

  7. Always keep the area around the vehicle, winch, winch cable, and load clear of people (especially children) and distractions while operating the winch.

  8. Always turn the vehicle ignition power OFF when it and the winch are not being used.

  9. Always be sure that at least five (5) full turns of winch cable are wrapped around the winch drum at all times. The friction provided by this wrapped cable allows the drum to pull on the winch cable and move the load.

  10. Always apply your vehicle’s park brake and/or park mechanism to hold the vehicle in place during winching. Use wheel chocks if needed.

  11. Always align the vehicle and winch with the load directly in front of the vehicle as much as possible. Avoid winching with the winch cable at an angle to the winching vehicle’s centerline whenever possible.

  12. If winching at an angle is unavoidable, follow these precautions:

    1. Look at the winch drum occasionally. Never let the winch cable “stack” or accumulate at one end of the winch drum. Too much winch cable at one end of the winch drum can damage the winch and the winch cable.

    2. If stacking occurs, stop winching. Follow step 15 of Winch Operation to feed and rewind the cable evenly before continuing the winch operation.

  13. Never winch up or down at sharp angles. This can destabilize the winching vehicle and possibly cause it to move without warning.

  14. Never attempt to winch loads that weigh more than the winch’s rated capacity.

  15. The winch motor may become hot during winch use. If you winch for more than 45 seconds, or if the winch stalls during operation, stop winching and permit the winch to cool down for 10 minutes before using it again.

  16. Never touch, push, pull or straddle the winch cable while winching a load.

  17. Never let the winch cable run through your hands, even if wearing heavy gloves.

  18. Never release the clutch on the winch when the winch cable is under load.

  19. Never use the winch for lifting or transporting people.

  20. Never use the winch to hoist or suspend a vertical load.

  21. Always inspect your winch and winch cable before each use.

  22. Never winch the hook fully into the winch. This can cause damage to winch components.

  23. Unplug the remote control from the vehicle when the winch is not in use to prevent inadvertent activation and use by unauthorized persons.

  24. Never grease or oil the winch cable. This will cause the winch cable to collect debris that will shorten the life of the cable.

5.5.3: Winch Operation

Read the Winch Safety Precautions in the preceding pages before using your winch.

TIP

Consider practicing the operation and use of your winch before you actually need to use it in the field.

WARNING

Improper winch use can result in SEVERE INJURY or DEATH. Always follow all winch instructions and warnings in this manual.

Each winching situation is unique.

  • Take your time to think through the winching you are about to do.

  • Proceed slowly and deliberately.

  • Never hurry or rush during winching.

  • Always pay attention to your surroundings.

  • You may need to change your winching strategy if it is not working.

  • Always remember that your winch is very powerful.

  • There are simply some situations that you and your winch will not be able to deal with. Do not be afraid to ask others to help when this happens.

  1. Always inspect the vehicle, winch, winch cable and winch controls for any signs of damage or parts in need of repair or replacement before each use. Pay particular attention to the first 3 ft (1 m) of winch cable if the winch is being used (or has been used) for lifting an accessory plow assembly. Promptly replace any worn or damaged cable.

  2. Never operate a winch or a vehicle in need of repair or service.

  3. Always apply your vehicle’s park brake and/ or park mechanism to hold the vehicle in place during winching. Use wheel chocks if needed.

  4. Always use the hook strap when handling the hook.

    WARNING

    Never put your fingers into the hook. This could lead to SEVERE INJURY.

    • Attach the hook itself onto the load or use a tow strap or chain to secure the load to the winch cable.

    TIP

    A “tow strap” is NOT intended to stretch. A “recovery strap” is designed to stretch.

    WARNING
    Never use a recovery strap when winching due to the excessive energy that can be released if the winch cable breaks. This can result in SEVERE INJURY or DEATH. See the Shock Loading section on Shock Loading.
    • Never hook the winch cable back onto itself. This will damage the winch cable and may result in winch cable failure.

    WARNING
    Replace the winch cable at the first sign of damage to prevent SEVERE INJURY or DEATH in the event of failure. For your safety, always replace POLARIS winch parts (including the cable) with genuine POLARIS replacement parts available at your authorized POLARIS dealer, or other qualified dealer.
    • If possible, keep the winch cable aligned with the centerline of the winching vehicle. This will help the spooling of the winch cable and reduce the load on the fairlead.

    • If freeing a stuck vehicle by attaching to a tree, use an item such as a tow strap to avoid damaging the tree during winch operation. Sharp cables and chains can damage and even kill trees. Please remember to Tread Lightly® (treadlightly.org).

    • Before operating the winch, be sure that the safety latch on the winch cable hook is fully seated when the load is attached.

    • Never operate your winch with a damaged hook or latch. Always replace damaged parts before using the winch.

  5. Never remove the hook strap from the hook.

  6. Release the winch clutch and pull out the winch cable.

  7. Pulling out as much cable as possible maximizes the winch’s pulling capacity. Always be sure that at least five (5) full turns of winch cable are wrapped around the winch drum at all times. The friction provided by this wrapped cable allows the drum to pull on the winch cable and move the load.

  8. Read and adhere to the following information for winch damping to ensure safe winch use.

    1. In order to absorb energy that could be released by a winch cable failure, always place a “damper” on the winch cable. A damper can be heavy jacket, tarp, or other soft, dense object. A damper can absorb much of the energy released if a winch cable breaks when winching. Even a tree limb can help as a damper if no other items are available to you.

    2. Lay the damper on top of the mid-point of the winch cable length that is spooled out.

    3. On a long pull, it may be necessary to stop winching so that the damper can be repositioned to the new mid-point of the winch cable. Always release the tension on the winch cable before repositioning the damper.

    4. Avoid being directly in line with the winch cable whenever possible. Also, never permit others to stand near or in line with the winch cable during winch operation.

  9. Never hook the winch cable back onto itself. This will damage the winch cable and may result in winch cable failure.

  10. Never use straps, chains or other rigging items that are damaged or worn.

  11. The ONLY time a winch-equipped vehicle should be moving when using the winch is when that vehicle itself is stuck. The winch equipped vehicle should NEVER be in motion to “shock” load the winch cable in an attempt to move a second stuck vehicle. See the Shock Loading section on Shock Loading. For your safety, always follow these guidelines when winching a vehicle free:

    1. Release the winch clutch and spool out the necessary length of winch cable.

    2. Align the winch cable as close as possible to the winching vehicle’s centerline.

    3. Attach the winch cable hook to the anchor point or the stuck vehicle’s frame following instructions in this manual.

    4. Re-engage the clutch on the winch.

    5. Slowly winch in the slack in the winch cable.

    6. Select the proper vehicle gear to propel the stuck vehicle in the direction of winching.

    7. Shift to the lowest gear available on the stuck vehicle.

    8. Slowly and carefully apply vehicle throttle and winch together to free the vehicle.

    9. Stop winching as soon as the stuck vehicle is able to propel itself without the help of the winch.

    10. Detach the winch cable hook.

    11. Rewind the winch cable evenly back onto the winch drum following the instructions in this manual.

  12. Never attempt to winch another stuck vehicle by attaching the winch cable to a suspension component, brush guard, bumper or cargo rack. Vehicle damage may result. Instead, attach the winch to a strong portion of the vehicle frame or hitch.

  13. Extensive winching will run down the battery on the winching vehicle. Let the winching vehicle’s engine run while operating the winch to prevent the battery from running low if winching for long periods.

  14. The winch motor may become hot during winch use. If you winch for more than 45 seconds, or if the winch stalls during operation, stop winching and permit the winch to cool down for 10 minutes before using it again.

  15. After winching is complete, especially if winching at an angle, it may be necessary to re-distribute the winch cable across the winch drum. You will need an assistant to perform this task.

    1. Release the clutch on the winch.

    2. Feed out the winch cable that is unevenly bunched up in one area.

    3. Re-engage the winch clutch.

    4. Have an assistant pull the winch cable tightly with about 100 lb (45 kg) of tension using the hook strap.

    5. Slowly winch the cable in while your assistant moves the end of the winch cable back and forth horizontally to evenly distribute the winch cable on the drum.

    6. Doing this reduces the chances of the winch cable “wedging” itself between lower layers of winch cable.

5.5.4: Winch Cable Care

WARNING

Use of worn or damaged cable could lead to sudden failure and SEVERE INJURY.

For your safety, always replace POLARIS winch parts (including the cable) with genuine POLARIS replacement parts available at your authorized POLARIS dealer, or other qualified person.

  1. Always inspect your winch before each use. Inspect for worn or loose parts including mounting hardware. Never use the winch if any part needs repair or replacement.

  2. Always inspect your winch cable before each use. Inspect for worn or kinked winch cable.

    A kinked winch cable made of wire rope is shown at right. Even after being “straightened out,” this cable has already been permanently and severely damaged. Promptly discontinue use of a winch cable in this condition.

    A kinked winch cable made of wire rope that has been “straightened out” is shown at right. Even though it may look usable, the cable has been permanently and severely damaged. It can no longer transmit the load that it could prior to kinking. Promptly discontinue use of a winch cable in this condition.


    A winch cable made of synthetic rope should be inspected for signs of fraying. Replace the cable if fraying is observed (shown below). Promptly discontinue use of a winch cable in this condition. Also replace the winch cable if there are fused or melted fibers. Such an area of the synthetic rope will be stiff and appear smooth or glazed. Promptly discontinue use of a winch cable in this condition.


5.5.5: Shock Loading

WARNING

Your winch cable is very strong but it is NOT designed for dynamic, or “shock” loading. Shock loading may tension a winch cable beyond its strength and cause the cable to break. The end of a broken winch cable under such high loading can cause SEVERE INJURY or DEATH to you and other bystanders.

Winch cables are designed to NOT absorb energy. This is true of both wire-rope and synthetic-rope winch cables.

  1. Never attempt to “jerk” a load with the winch. For example, never take up slack in the winch cable by moving the winching vehicle in an attempt to move an object. This is a dangerous practice. It generates high winch cable loads that may exceed the strength of the cable. Even a slowly moving vehicle can create large shock loads in a winch cable.

    WARNING

    SEVERE INJURY or DEATH can result from a broken winch cable.

  2. Never quickly turn the winch ON and OFF repeatedly (“jogging”). This puts extra load on the winch, winch cable, and generates excessive heat from the motor. This is a form of shock loading.

  3. Never tow a vehicle or other object with your winch. Towing an object with a winch produces shock loading of the cable even when towing at slow speeds. Towing from a winch also positions the towing force high on the vehicle. This can cause instability of the vehicle and possibly lead to an accident.

  4. Never use recovery straps with your winch. Recovery straps are designed to stretch and can store energy. This stored energy in the recovery strap is released if a winch cable fails making the event even more hazardous. Similarly, never use elastic “bungie” cords for winching.

  5. Never use the winch to tie down a vehicle to a trailer or other transportation vehicle. This type of use also causes shock loading that can cause damage to the winch, winch cable, or vehicles used.

Your winch cable is designed and tested to withstand the loads produced by the winch motor when operated from a stationary vehicle. Always remember that the winch and winch cable are NOT designed for shock loading.

5.5.6: Winch Maintenance and Service Safety

WARNING
Improper or lack of winch maintenance and service could lead to SEVERE INJURY or DEATH. Always follow all winch instructions and warnings in this manual.
  1. Always inspect your winch before each use. Inspect for worn or kinked winch cable. Also inspect for worn or loose parts including mounting hardware.

  2. Permit your winch motor to cool down prior to servicing your winch.

  3. Never work on your winch without first disconnecting the battery connections to prevent accidental activation of the winch.

  4. For your safety, always replace POLARIS winch parts (including the cable) with genuine POLARIS replacement parts available at your authorized POLARIS dealer, or other qualified person.

  5. Some winch models use wire rope as the winch cable. Other winches use a specially designed synthetic rope as the winch cable.

  6. Never replace a synthetic-rope winch cable with a consumer-grade polymer rope such as can be purchased in a hardware store. Although they may look similar, they are NOT alike. A polymer rope not designed for winch use will stretch and store excessive energy when winching.

WARNING
Failure of a stretched rope under winching conditions will release all of the stored energy. This will increase the chances of SEVERE INJURY or DEATH.

Chapter 6: Emission Control Systems

6.6.1: Noise Emission Control System

Do not modify the engine, intake or exhaust components, as doing so may affect compliance with U.S.A. EPA noise control requirements (40 CFR 205) and local noise level requirements.

6.6.2: Operation on Public Lands in the U.S.A.

Your vehicle has a spark arrester that was tested and qualified to be in accordance with the USFS standard 5100-1a. Federal law requires that this spark arrester be installed and functional when the vehicle is operated on public lands.

Operation of off-road vehicles on public lands in the U.S.A. is regulated by 43 CFR 420. Violations are subject to monetary penalties. Federal regulations can be viewed online at https://ecfr.federalregister.gov/current/title-43/subtitle-B/chapter-I/part-420.

6.6.3: Crankcase Emission Control System

This engine is equipped with a closed crankcase system. Blow-by gases are forced back to the combustion chamber by the intake system. All exhaust gases exit through the exhaust system.

6.6.4: Exhaust Emission Control System

Exhaust emissions are controlled by engine design. An electronic fuel injection (EFI) system controls fuel delivery. The engine and EFI components are set at the factory for optimal performance and are not adjustable.

The emissions label is located on the inside of the lower left frame tube (below driver’s foot area).

6.6.5: Electromagnetic Interference

This spark ignition system complies with Canadian ICES-002.

This vehicle complies with the EMC requirements of UN ECE Regulation 10.

Non-ionizing Radiation: This vehicle emits some electromagnetic energy. People with active or non-active implantable medical devices (such as heart monitoring or controlling devices) should review the limitations of their device and the applicable electromagnetic standards and directives that apply to this vehicle.

Chapter 7: Maintenance

7.7.1: Periodic Maintenance

Any qualified repair shop or person may maintain, replace or repair the emission control devices or systems on your vehicle. An authorized POLARIS dealer can perform any service that may be necessary for your vehicle. POLARIS also recommends POLARIS parts for emissions-related service, however equivalent parts can be used.

It is a potential violation of the Clean Air Act if a part supplied by an aftermarket parts manufacturer reduces the effectiveness of the vehicle’s emission controls. Tampering with emission controls is prohibited by federal law.

Owners are responsible for performing the scheduled maintenance identified in this owner’s manual.

Careful periodic maintenance will help keep your vehicle in the safest, most reliable condition. Inspection, adjustment and lubrication of important components are explained in the periodic maintenance chart.

Inspect, clean, lubricate, adjust and replace parts as necessary. When inspection reveals the need for replacement parts, genuine POLARIS parts are available from your POLARIS dealer. Equivalent parts may be used for emissions-related service.

Service and adjustments are important for proper vehicle operation. If you’re not familiar with safe service and adjustment procedures, a qualified dealer can perform these operations.

Vehicles subjected to heavy or severe use patterns must be inspected and serviced more frequently.

SEVERE USE DEFINITION

  • Frequent immersion in mud, water or sand

  • Frequent or prolonged operation in dusty environments

  • Short trip cold weather operation

  • Racing or race-style high RPM use

  • Prolonged low speed, heavy load operation

  • Extended idle

Pay special attention to the oil level. A rise in oil level during cold weather can indicate contaminants collecting in the oil sump or crankcase. Change oil immediately if the oil level begins to rise. Monitor the oil level, and if it continues to rise, discontinue use and determine the cause. Your dealer can assist.

Maintenance Chart Key

Symbol Description
XU

Perform these procedures more often for vehicles subjected to severe use.

D

Have an authorized dealer or other qualified person perform these services.

WARNING
Improperly performing the procedures marked with a D could result in component failure and lead to serious injury or death. Have an authorized dealer or other qualified person perform these services.

Periodic Maintenance Chart

Perform all services at whichever maintenance interval is reached first. Record maintenance and service in the Maintenance Log.

Item Maintenance Interval
(whichever comes first)
Remarks
Hours CLNDR Miles (KM)
  Engine Oil Level - Daily - Pre-ride Checklist; check level daily
XU Coolant - Daily - Check level daily; replace coolant every 5 years
XU
D
Brake Pad Wear 10 H Monthly 100 (160) Inspect periodically
  Battery 25 H Monthly 200 (320) Check terminals; clean; test
  Fuel System 25 H Monthly 200 (320) Inspect; cycle key to pressurize fuel pump; check lines and fittings for leaks and abrasion
XU Front Gearcase Fluid (Demand Drive) 25 H 1 M - Break-in oil level check
XU Transmission Fluid (AGL) 25 H 1 M - Break-in oil level check
XU Engine Oil / Filter Change (Break-In) 25 H 1 M 625 (1000) Perform break-in oil / filter change
XU General Lubrication 50 H 3 M 500 (800) Lubricate all fittings, pivots, cables, etc.
XU Air Filter 50 H 6 M 500 (800) Inspect; replace as needed
  Engine Breather 50 H 6 M 500 (800) Inspect; replace as needed
  Shift Linkage 50 H 6 M 500 (800) Inspect, lubricate, adjust
D Steering 50 H 6 M 500 (800) Lubricate
XU Front / Rear Stabilizer Bars 50 H 6 M 500 (800) Lubricate and inspect bushings
D Throttle Pedal 50 H 6 M 500 (800) Inspect; adjust; lubricate; replace as needed
  Throttle Body Intake Ducts/Flange 50 H 6 M 500 (800) Inspect duct for proper sealing/air leaks
  Cooling System 50 H 6 M 500 (800) Inspect coolant strength seasonally; pressure test system yearly
XU Cooling Hoses 50 H 6 M 500 (800) Inspect for leaks
XU Radiator 50 H 6 M 500 (800) Inspect; clean external surfaces
XU Shock Absorbers 50 H - 500 (800) Inspect for leaks, loose joints, and wear
XU Engine Oil/Filter Change 100 H 6 M 1000 (1600) Perform oil / filter change
  Drive Belt 100 H 12 M 1000 (1600) Inspect; replace as needed
XU Front Gearcase Fluid (Demand Drive) 100 H 12 M 1000 (1600) Change fluid
XU Transmission Fluid (AGL) 100 H 12 M 1000 (1600) Change fluid
D Fuel System 100 H 12 M 1000 (1600) Check for leaks at tank cap, lines, filter, pump, throttle body, replace if necessary
XU Engine Mounts 100 H 12 M 1000 (1600) Inspect; replace if necessary
  Exhaust Muffler / Pipe 100 H 12 M 1000 (1600) Inspect
  Drive Shafts 100 H 12 M 1000 (1600) Remove and grease
D Spark Plug 100 H 12 M 1000 (1600) Inspect; replace as needed
XU Wiring 100 H 12 M 1000 (1600) Inspect for wear, routing, security; inspect connectors subjected to water, mud, etc.
D Wheel Bearings 100 H 12 M 1000 (1600) Inspect; replace as needed
XU Shock Seals 100 H - - Visually inspect shock seals
  Ratcheting Cam Chain Tensioner 200 H - 2000 (3200) Check; replace as needed
D Brake Fluid 200 H 24 M 2000 (3200) Change every two years
  Suspension Bushings 250 H 24 M 2000 (3200) Inspect; replace if necessary
  Spark Arrester 300 H 36 M 3000 (4800) Clean out; replace if necessary
Clean out after every ride through mud
D Toe Adjustment - Inspect periodically; adjust when parts are replaced
  Headlight Aim - Adjust as needed
XU Engine Oil Lines/Fasteners 50 H 6 M 1000 (1600) Inspect for leaks and loose fittings
D Valve Clearance 150 H - 3125 (5000) Inspect; adjust as needed
D
XU
Clutches (Drive and Driven) 200 H 12 M 6000 (9600) Inspect; clean; replace worn parts
D
XU
Shock Absorbers 250 H - 2500 (4000) Replace or rebuild (if applicable)
  Headlight Aim - Adjust as needed

7.7.2: Lubrication Recommendations

Check and lubricate all components at the intervals outlined in the Periodic Maintenance Chart, or more often under severe use, such as wet or dusty conditions. Items not listed in the chart should be lubricated at the general lubrication interval.

Item Lube Method
Engine Oil PS-4 5W-50 4-Cycle Oil Add to proper level on dipstick.
See Engine Oil.
Brake Fluid DOT 4 Brake Fluid Maintain level between fill lines.
See Brakes.
Transmission Oil
(Main Gearcase)
AGL Gearcase Lubricant & Transmission Fluid See Transmission Oil Check (19 CREW 1000).
Demand Drive Fluid
(Front Gearcase)
Demand Drive Fluid See Demand Drive Oil Check.
Prop Shaft U-Joint Grease Locate fittings and grease.

7.7.3: Engine Oil

Always check and change the oil at the intervals outlined in the Periodic Maintenance Chart. Always use the recommended engine oil. Always change the oil filter whenever changing oil.

Pay special attention to the oil level. A rise in oil level during cold weather can indicate contaminants collecting in the oil sump or crankcase. Change oil immediately if the oil level begins to rise. Monitor the oil level, and if it continues to rise, discontinue use and determine the cause. Your dealer can assist.

WARNING

Vehicle operation with insufficient, deteriorated, or contaminated engine oil will cause accelerated wear and may result in engine seizure, accident and injury. Always perform the maintenance procedures as outlined in the Periodic Maintenance Chart.

7.7.3.1: Oil Recommendations

POLARIS recommends the use of POLARIS PS-4 5W-50 4-Cycle Oil or a similar oil. Refer to the Specifications section for capacities.

Oil may need to be changed more frequently if POLARIS PS-4 engine oil is not used. Follow the manufacturer's recommendations for ambient temperature operation. See the Polaris Products section for part numbers.

NOTICE

Mixing brands or using a non-recommended oil may cause serious engine damage. Always use the recommended oil. Never substitute or mix oil brands.

7.7.3.2: Oil Check

The oil dipstick is located on the engine. Access the dipstick through the right rear wheel well.

To check the oil, do the following:

  1. Position vehicle on a level surface and place the transmission in PARK.

  2. Stop the engine and allow it to cool down before removing the dipstick.

  3. Raise the cargo box. Unlock the dipstick lever 1. Remove the dipstick and wipe it dry with a clean cloth.

  4. Reinstall the dipstick and push it into place. Do not lock the dipstick.

    NOTICE

    Make certain the dipstick is inserted all the way into the dipstick tube to keep the depth of the dipstick consistent.

  5. Remove the dipstick and check the oil level.

  6. Add the recommended oil as necessary to bring the oil level within the SAFE range on dipstick. Do not overfill (see NOTICE below).

    NOTICE

    A rising oil level between checks during cold weather operation can indicate contaminants such as gas or moisture collecting in the crankcase. If the oil level is over the upper mark, change the oil immediately.

  7. With the cargo box raised, add engine oil through the oil fill cap 2 located on top of the valve cover, under the cargo box.

  8. When finished, reinstall dipstick and lock the lever. Lower the cargo box and secure in position.

7.7.3.3: Engine Oil and Filter Replacement

Always change engine oil and filter at the intervals outlined in the Periodic Maintenance Chart. Always change the oil filter whenever changing the engine oil.

The engine oil dipstick is located on the right front side of the engine. The engine oil fill cap is located on top of the valve cover. Access the oil dipstick and oil fill cap by tilting the rear cargo box.

The crankcase drain plug is located on the bottom of the crankcase. Access the drain plug through the skid plate access hole located directly under the crankcase.


  1. Position vehicle on a level surface and place the transmission in PARK.

  2. Stop the engine and allow it to cool down.

  3. Clean the area around the crankcase drain plug.

    CAUTION

    Use caution when performing this procedure. Do not allow hot engine oil to come into contact with skin, as serious burns may result.

  4. Place a drain pan under the engine crankcase and remove the drain plug. Allow the oil to drain completely.

  5. Remove all cargo from the cargo box.

    CAUTION

    Always remove all cargo from the cargo box before lifting the box to access the engine.

  6. Pull up on the cargo box release lever to tilt the box.

  7. Using the Oil Filter Wrench, turn the oil filter 2 counter-clockwise to remove it.

  8. Using a clean dry cloth, clean the filter sealing surface on the engine crankcase.

  9. Lubricate the O-ring on the new oil filter with a film of fresh engine oil. Check to make sure the O-ring is in good condition. Install it to specification.

    TORQUE

    Oil Filter

    Turn by hand until filter O-ring contacts sealing surface, then turn an additional 3/4 turn.
  10. Replace the sealing washer on drain plug.

    NOTICE

    The sealing surface on the drain plug should be clean and free of burrs, nicks or scratches.

  11. Reinstall the engine crankcase drain plug. Torque drain plug to specification.

    TORQUE

    Crankcase Drain Plug

    16 N⋅m (12 ft-lbs)
  12. Remove oil fill cap. Fill engine with recommended engine oil.

  13. Verify the transmission is still in PARK.

  14. Start the engine and allow it to idle for 30 seconds.

  15. Stop the engine and inspect for oil leaks. Wait at least 15 seconds before removing the dipstick.

  16. Unlock the dipstick lever. Remove the dipstick and wipe it dry with a clean cloth.

  17. Reinstall the dipstick and push it into place. Do not lock the dipstick.

    NOTICE

    Make certain the dipstick is inserted all the way into the dipstick tube to keep the depth of the dipstick consistent.

  18. Remove the dipstick and check the oil level.

  19. Add the recommended oil as necessary to bring the oil level within the SAFE range on dipstick. Do not overfill.

  20. When finished, reinstall the oil fill cap, oil dipstick and lock the lever.

  21. Dispose of used oil and filter properly.

7.7.4: Gearcases

7.7.4.1: Gearcase Specification Chart

Gearcase Lubricant Capacity Fill Plug Torque Drain Plug/ Level Check Plug Torque
Transmission (Main Gearcase) AGL Gearcase Lubricant & Transmission Fluid 41 oz.
(1200 ml)
10-14 ft. lbs.
(14-19 Nm)
10-14 ft. lbs.
(14-19 Nm)
Demand Drive Unit (Front Gearcase) Demand Drive Fluid 6.8 oz.
(200 ml)*
8-10 ft. lbs.
(11-13.6 Nm)
11 ft. lbs.
(15 Nm)
*If your vehicle is equipped with high mounted intakes: 9.3 oz. (275 ml)

7.7.4.2: Transmission (Main Gearcase)

7.7.4.2.1: Transmission Oil Check

Always check and change the transmission oil at the intervals outlined in the Periodic Maintenance Chart. Maintain the oil level even with the bottom thread of the fill plug hole.

The fill plug is located on the rear of the gearcase. Maintain the fluid level at the bottom of the fill plug hole.

To check the transmission fluid, do the following:

  1. Position the vehicle on a level surface.

  2. Remove the fill plug 1.

  3. Check the fluid level.

  4. Add the recommended fluid to the bottom of the fill plug hole. Do not overfill.

  5. Reinstall the fill plug. Torque to specification.

7.7.4.2.2: Transmission Oil Change

The drain plug is located on the bottom of the gearcase. Access the drain plug through the hole in the skid plate.

  1. Remove the fill plug 1.

  2. Place a drain pan under the drain plug 2.

  3. Remove the drain plug. Allow the fluid to drain completely.

  4. Clean and reinstall the drain plug. Torque to specification.

  5. Add the recommended fluid to the bottom of the fill plug hole. Do not overfill.

  6. Reinstall the fill plug. Torque to specification.

  7. Check for leaks. Discard used fluid properly.

7.7.4.3: Demand Drive (Front Gearcase)

7.7.4.3.1: Demand Drive Oil Check

Always check and change the demand drive fluid at the intervals outlined in the Periodic Maintenance Chart. Maintain the oil level even with the bottom thread of the fill plug hole. Refer to the Gearcase Specifications Chart for recommended lubricants, capacities and torque specifications.

The front gearcase fill plug 1 is located on the right side of the front gearcase.

  1. Position the vehicle on a level surface.

  2. Remove the fill plug 1. Check the oil level.

  3. Add the recommended oil as needed.

  4. Reinstall the fill plug. Torque to specification.

7.7.4.3.2: Demand Drive Oil Change
  1. Support the vehicle securely with a jackstand.

  2. Remove the front tire on the passenger's side for ease of access (optional).

  3. Remove the fill plug.

  4. Place a drain pan under the drain plug 2 on the bottom right-hand side.

  5. Remove the drain plug. Drain the oil.

  6. Clean and reinstall the drain plug. Torque to specification.

  7. Add the recommended fluid to the bottom of the fill plug hole. Do not overfill.

  8. Reinstall the fill plug. Torque to specification.

  9. Check for leaks.

  10. Discard used oil properly.

7.7.5: Spark Plugs

7.7.5.1: Spark Plug Recommendations

Refer to the Specifications section for the recommended spark plug type for your vehicle. Always torque spark plugs to specification.

NOTICE

Using non-recommended spark plugs can result in serious engine damage. Always use POLARIS-recommended spark plugs or their equivalent.

7.7.5.2: Spark Plug Gap/Torque

Electrode Gap New or Used Plug Torque
0.7 – 0.8 mm 10 N-M (7.4 ft. lbs.)

7.7.5.3: Spark Plug Inspection

Spark plug condition is indicative of engine operation. The spark plug firing end condition should be read after the engine is warmed up and the vehicle is driven at higher speeds. Immediately check the spark plug for correct color.

CAUTION
A hot exhaust system and engine can cause burns. Wear protective gloves when removing a spark plug for inspection.

To inspect the spark plugs, do the following:

  1. Lift the cargo box to access the spark plugs.

  2. Remove the spark plug cap. Using the spark plug wrench provided in the tool kit, remove the plug by rotating it counter-clockwise.

  3. Reverse the procedure for spark plug installation.

  4. Torque to specification.

7.7.5.4: Normal Plug

The normal insulator tip is gray, tan or light brown. There will be few combustion deposits. The electrodes are not burned or eroded. This indicates the proper type and heat range for the engine and the service.

The tip should not be white. A white insulator tip indicates overheating, caused by use of an improper spark plug or incorrect throttle body adjustments.

7.7.5.5: Wet Fouled Plug

The wet fouled insulator tip is black. A damp oil film covers the firing end. There may be a carbon layer over the entire nose. Generally, the electrodes are not worn. General causes of fouling are excessive oil consumption, use of non-recommended oil, or poor fuel quality.

7.7.6: Cooling System

The engine coolant level is controlled or maintained by the recovery system. The recovery system components are the overflow bottle, radiator filler neck, radiator pressure cap and connecting hose.

As coolant operating temperature increases, the expanding (heated) excess coolant is forced out of the radiator, past the pressure cap, and into the overflow bottle. As engine coolant temperature decreases, the contracting (cooled) coolant is drawn back up from the tank, past the pressure cap, and into the radiator.

Some coolant level drop on new vehicles is normal as the system is purging itself of trapped air. Observe coolant levels and maintain as recommended by adding coolant to the overflow bottle.

7.7.6.1: Adding or Changing Coolant

POLARIS recommends the use of POLARIS Antifreeze 50/50 Premix. This antifreeze is already premixed and ready to use. Do not dilute with water.

To ensure that the coolant maintains its ability to protect the engine, we recommend that the system be completely drained every five (5) years and fresh Antifreeze 50/50 Premix added.

Any time the cooling system has been drained for maintenance or repair, replace the coolant with fresh Antifreeze 50/50 Premix. If the recovery bottle has run dry, the level in the radiator should be inspected. Add coolant as needed.

7.7.6.2: Radiator and Cooling Fan

Always check and clean the screen and radiator fins at the intervals outlined in the Periodic Maintenance Chart. Do not obstruct or deflect air flow through the radiator by installing unauthorized accessories in front of the radiator or behind the cooling fan. Interference with the radiator air flow can lead to overheating and consequent engine damage.

NOTICE
Washing the vehicle with a high-pressure hose could damage the radiator fins and impair the radiator's effectiveness. Using a high-pressure system is not recommended.

7.7.6.3: Radiator Coolant Level

Always check and clean the screen and radiator fins at the intervals outlined in the Periodic Maintenance Chart. Do not obstruct or deflect air flow through the radiator by installing unauthorized accessories in front of the radiator or behind the cooling fan. Interference with the radiator air flow can lead to overheating and consequentially, engine damage.


  1. Lift the hood.

    CAUTION
    Escaping steam can cause burns. Never remove the pressure cap while the engine is warm or hot. Always allow the engine to cool before removing the pressure cap.
  2. Slowly remove the radiator cap 1.

  3. View the coolant level through the opening.

  4. Use a funnel and slowly add coolant as needed.

    TIP
    This procedure is required only if the cooling system has been drained for maintenance and/or repair. But if the overflow bottle has run dry, the level in the radiator should also be inspected.
  5. Reinstall the pressure cap. Use of a non-standard pressure cap will not allow the recovery system to function properly. Your POLARIS dealer can provide the correct replacement part.

7.7.6.4: Overflow Bottle Coolant Level

Always check and change the coolant at the intervals outlined in the Periodic Maintenance Chart. Maintain the coolant level between the minimum and maximum marks on the bottle (when the fluid is cool).

  1. Position the vehicle on a level surface.

  2. Lift the hood. View the coolant level in the overflow bottle 2.

  3. If the coolant level is below the safe operating range, lift the hood and locate the overflow bottle lid. Remove the cap and use a funnel to add coolant through the filler opening. Reinstall the cap.

TIP
If coolant must be added often, or if the overflow bottle runs completely dry, there may be a leak in the system. Your dealer can inspect the cooling system.

7.7.7: Air Conditioning

WARNING
Only licensed and certified professionals are allowed to check and maintain AC refrigerant levels. Your POLARIS dealer can assist.

Filter Cleaning

The air conditioning filter is located below the dash.

  1. Remove the two fasteners and remove the filter cover.

  2. Clean the filter with low air pressure. Check for damage, replace if damaged.

Condenser Cleaning

NOTICE
Washing the vehicle with a high-pressure hose could damage the radiator fins and impair the radiator's effectiveness. Using a high-pressure system is not recommended.

The condenser should be cleaned at the correct service interval as outlined in the Periodic Maintenance Chart. The condenser is located at the front of the vehicle, behind the front grille.

To clean the condenser, do the following:

  1. Stop the machine on a flat level surface. Place the gear selector in PARK. Stop the engine and exit the vehicle.

  2. Remove the front grille of the vehicle by pushing down on the two grille tabs 1 and pull the top of the grille toward the front of the vehicle.

  3. Use low pressure air or water to clean the condenser.

  4. Reinstall the front grille and ensure it is snapped into place.

7.7.8: POLARIS Variable Transmission (PVT) System

WARNING

Failure to comply with the instructions in this warning can result in severe injury or death. Do not modify any component of the PVT system. Doing so may reduce its strength so that a failure may occur at a high speed. The PVT system has been precision balanced. Any modification will cause the system to be out of balance, creating vibration and additional loads on components.


The PVT system rotates at high speeds, creating large amounts of force on clutch components. As the owner, you have the following responsibilities for your own safety and the safety of others:

  • Always follow all recommended maintenance procedures. Always look for and remove debris inside and around the clutch and vent system when replacing the belt.

  • See your dealer or other qualified service person as outlined in the owner's manual.

  • This PVT system is intended for use on POLARIS products only. Do not install it in any other product.

  • Always make sure the PVT housing is securely in place during operation.

7.7.8.1: Belt Removal

If a belt fails, always clean any debris from the clutch air duct and from the clutch and engine compartments when replacing the belt.

WARNING
Failure to remove ALL debris when replacing the belt could result in vehicle damage, loss of control and severe injury or death.
NOTICE

Inspect the entire clutch outlet duct (including the outlet duct screen) when replacing a drive belt. Remove any debris found in the outlet duct or outlet duct screen.

To remove the belt, do the following:

  1. Remove the nine fasteners 1 that retain the outer clutch cover.


    NOTICE

    Removal of left rear wheel or left rear shock is NOT necessary for belt replacement.

  2. Pull the clutch cover forward and slide towards the front of the vehicle as shown above.

  3. Rotate the clutch cover back and lift up and over the control arm mounting 2.

    NOTICE
    Use care when lifting clutch cover upwards. Do not damage cover, intake boot, or electrical harness.

  4. Pull clutch cover out towards the rear of the vehicle as shown above.

  5. Mark the drive belt direction of rotation so that it can be installed in the same direction.

  6. Insert clutch spreader tool 3 into threaded hole on driven clutch as shown and turn clockwise to spread clutch.

    NOTICE

    Clutch spreader tool part number 2875911 is found in vehicle tool kit.

  7. Walk the belt out of the driven clutch and drive clutch. Remove the belt from the vehicle.

7.7.8.2: Belt Inspection

To inspect the drive belt, do the following:

  1. Inspect belt for hour-glassing (extreme circular wear in at least one spot and on both sides of the belt). Hour glassing occurs when the drive train does not move and the drive clutch engages the belt.

  2. Inspect belt for loose cords, missing cogs, cracks, abrasions, thin spots, or excessive wear. Compare belt measurements with a new drive belt. Replace if necessary.

  3. Belts with thin spots, burn marks, etc., should be replaced to eliminate noise, vibration, or erratic PVT operation.

7.7.8.3: Belt Installation

NOTICE

Be sure to install belt in the same direction as it was removed.

  1. With the clutch spreader tool 1 installed, loop the belt over the drive clutch and over the driven clutch.

  2. Rotate the driven clutch and walk the belt into the clutch.

  3. Remove the clutch spreader tool from driven clutch.

  4. Rotate / spin the driven clutch and belt approximately 5-7 times to properly seat the belt in the driven clutch.

  5. Install the clutch cover into wheel well as shown above.

  6. Rotate clutch cover over A-Arm 2 as shown below. Use care not to damage intake boots or electrical harness.

  7. Pull clutch cover backwards and align with bolt holes on inner clutch cover as shown below.

  8. Install and torque the outer clutch cover bolts to specification.


    TORQUE

    PVT Outer Cover Fasteners: 35 in-lb (4 N·m)

7.7.8.4: POLARIS Variable Transmission (PVT) Drying

There may be some instances when water is ingested into the PVT system. Use the following instructions to dry it out before operating:

  1. Position the vehicle on a level surface.

  2. Remove the red drain plug on the outer clutch cover. Allow the water to drain completely. Reinstall the drain plug.

  3. Place the transmission in PARK.

  4. Start the engine.

  5. Apply varying throttle for 10-15 seconds to expel the moisture and air-dry the belt and clutches. Do not hold the throttle wide open for more than five (5) seconds.

  6. Allow the engine RPM to settle to idle speed. Apply the brakes. Shift the transmission to the lowest available range.

  7. Test for belt slippage. If the belt slips, repeat the process.

  8. Your vehicle requires service as soon as possible. Your POLARIS dealer can assist.

7.7.9: Vehicle Immersion

WARNING
If your vehicle becomes immersed, major engine damage can result if the machine is not thoroughly inspected. Take the vehicle in for service before starting the engine. Your POLARIS dealer can provide this service.

If it's impossible to take your RANGER to a dealer before starting it, follow the steps outlined below:

  1. Move the vehicle to dry land or at the very least, to water below the floorboard (or to water below seat base level if your vehicle is equipped with high mounted intakes).

  2. Dry any water present in the air box. Filter replacement is required if water is present.

  3. Remove the spark plugs. Turn the engine over several times using the electric start.

  4. Dry the spark plugs and reinstall, or replace with new plugs.

  5. Attempt to start the engine. If necessary, repeat the drying procedure.

  6. Take the vehicle in for service as soon as possible, whether you succeed in starting it or not. Your POLARIS dealer can provide the required service.

  7. If water has been ingested into the PVT follow the procedure for drying.

7.7.10: Filter Systems

7.7.10.1: Air Filter Replacement

Inspect the air filter at the intervals outlined in the Periodic Maintenance Chart. In extremely dusty conditions, air filter replacement will be required more often.

  1. Tilt the rear cargo box to access the airbox.

  2. Release the five airbox cover latches and lift the cover up and out to access the air filter element.

  3. Remove the air filter element 1.

  4. Inspect the airbox for oil or water deposits. Wipe away any deposits with a clean shop towel.

    NOTICE

    If the filter has been soaked with fuel or oil it must be replaced.

    DO NOT attempt to clean the air filter.

  5. Place the air filter into the airbox. Reposition the lower airbox cover and install the three retaining latches.

    NOTICE
    Make sure the hinge pins are properly seated when reassembling the airbox

7.7.10.2: Spark Arrester

WARNING
  • Never operate the vehicle without the spark arrester.

  • Remove any combustible materials from the area.

Failure to heed the following warnings while servicing the spark arrestor could result in serious injury or death.

  • Never run the engine in an enclosed area. Exhaust contains poisonous carbon monoxide gas that can cause loss of consciousness or death in a very short time.

  • Do NOT perform service on the spark arrester while the system is HOT. Exhaust system temperatures can reach extreme temperatures. Allow components to cool sufficiently before proceeding.

  • Do not stand behind or in front of the vehicle while purging the exhaust system.

  • Never go under the vehicle while it is inclined.

  • Wear eye protection and gloves while servicing.

Use the following procedure to periodically purge accumulated carbon from the exhaust pipe.

  1. Turn off engine and allow exhaust to cool sufficiently.

  2. Remove the spark arrester from the tailpipe of the muffler.

  3. Remove any debris from spark arrester and the tailpipe.

  4. Inspect spark arrester for holes in mesh screen. Replace as needed.

  5. Replace spark arrester and torque bolt to specification.

    TORQUE
    8 ft-lbs (11 Nm)

7.7.11: Brakes

The front and rear brakes are hydraulic disc type brakes. Press down on the brake pedal to engage the brakes.

Brake Fluid

Inspect the brake system routinely. Inspect the level of the brake fluid before each operation.

WARNING
After opening a bottle of brake fluid, always discard any unused portion. Never store or use a partial bottle. Brake fluid is hygroscopic, meaning it rapidly absorbs moisture from the air. The moisture causes the boiling temperature of the brake fluid to drop, which can lead to early brake fade and the possibility of accident or severe injury.

Change the brake fluid every two years and any time the fluid becomes contaminated, the fluid level is below the minimum, or if the type and brand of the fluid in the reservoir are unknown.

  1. Position the vehicle on a level surface and turn off the engine.

  2. View the brake fluid level at the reservoir in the driver’s side wheel well. The level should be between the upper (MAX) and lower (MIN) level lines.

  3. If the fluid level is lower than the upper level line, open the hood and add brake fluid to the upper (MAX) line.

  4. Apply the brake forcefully for a few seconds and check for fluid leakage around the fittings.

Brake Inspection

WARNING

Do not apply WD-40® or any petroleum product to brake discs. These types of products are flammable and may also reduce the friction between the brake pad and caliper.

  1. Check the brake system for fluid leaks.

  2. Check the brake pedal for excessive travel or a spongy feel.

  3. Check the friction pads for wear, damage and looseness.

  4. Check brake discs for signs of cracks, excessive corrosion, warping or other damage. Clean any grease using an approved brake cleaner or alcohol.

  5. Inspect the brake disc spline and pad wear surface 1 for excessive wear. Change pads when worn to 0.040 in (1 mm).

7.7.12: Steering Wheel Inspection

Check the steering wheel for specified freeplay and smooth operation at the intervals outlined in the Periodic Maintenance Chart section.

  1. Position the vehicle on level ground.

  2. Lightly turn the steering wheel left and right.

  3. There should be 0.8-1.0 in (20-25 mm) of freeplay.

  4. If there is excessive freeplay or strange noises, or the steering feels rough or “catchy,” have the steering system inspected by an authorized dealer.

7.7.13: Suspension Adjustment

The front and rear suspensions can be adjusted to provide a stiffer suspension, if necessary.

  1. Remove the top shock mounting bolts from the inside mounting positions 1.

  2. Reposition the shocks to the outside mounting holes 2.

  3. Reinstall the shock mounting bolts. Torque to 40 ft-lbs (54.2 Nm).

Cam Adjustment

NOTICE
Texas Edition models are equipped with Nivomat shocks, which cannot be manually adjusted. Nivomat shocks automatically adjust internal pressure during use

Adjust the front and rear shock absorber springs by rotating the adjustment cam either clockwise or counter-clockwise to increase or decrease spring tension.


Always heed the following rules if you make adjustments to this suspension.

  • Always return the suspension to the lowest (softest) setting after the load is removed from the vehicle. The increased suspension height will negatively impact vehicle stability when operating without a load.

  • Always apply the same adjustment setting to both rear wheels.

7.7.14: Tires

WARNING

Operating your vehicle with worn tires will increase the possibility of skidding, loss of control and an accident, which could result in serious injury or death. Always replace tires when the tread depth measures 1/8 in (3 mm) or less.

Improper tire inflation or the use of non-standard size or type of tires may adversely affect vehicle handling, which could result in vehicle damage or personal injury. Always maintain proper tire pressure. Always use POLARIS approved size and type of tires for this vehicle when replacing tires.

7.7.14.1: Tire Tread Depth

Always replace tires when tread depth is worn to 3 mm (1/8”) or less.

7.7.14.2: Axle and Wheel Nut Torque Specifications

Inspect the following items occasionally for tightness, and if they've been loosened for maintenance service. Do not lubricate the stud or the lug nut.

Lug Nut

(Aluminum Wheels)

Front and Rear

120 ft-lbs (163 N·m)

2-Piece Flange Nut

(Steel Wheels)

Front and Rear

60 ft-lbs (81 N·m)

Spindle Nut

Front

80 ft-lbs (108 N·m)

Hub Retaining Nut

Rear

110 ft-lbs (149 N·m)

7.7.14.3: Wheel Removal

  1. Position the vehicle on a level surface.

  2. Place the transmission in PARK. Stop the engine.

  3. Loosen the wheel nuts slightly.

  4. Elevate the side of the vehicle by placing a suitable stand under the frame.

  5. Remove the wheel nuts and washers. Remove the wheel.

7.7.14.4: Wheel Installation

WARNING
Improperly installed wheels can adversely affect tire wear and vehicle handling, which can result in serious injury or death. Always ensure that all nuts are torqued to specification. Do not service axle nuts that have a cotter pin installed. Your dealer can assist.
  1. Place the transmission in PARK.

  2. Place the wheel on the hub with the valve stem toward the outside and rotation arrows on the tire pointing toward forward rotation.

  3. Attach the wheel nuts and washers and finger-tighten.

  4. Carefully lower the vehicle to the ground.

  5. Torque the wheel nuts to specification.

7.7.15: Lights

Poor lighting can result in reduced visibility when driving. Headlight and taillight lenses become dirty during normal operation. Clean lights frequently and replace burned out lamps promptly. Do not operate this vehicle at night or in low light conditions until the headlight is replaced. Always make sure lights are adjusted properly for best visibility.

When servicing a halogen lamp, don't touch the lamp with bare fingers. Oil from your skin leaves a residue, causing a hot spot that will shorten the life of the lamp.

7.7.15.1: Headlight Bulb Replacement

  1. Remove the hood from the front cab.

  2. Locate the bulb on the back side of the headlight housing.

  3. Disconnect the harness from the bulb. Be sure to pull on the connector 1, not on the wiring.

  4. Turn the bulb counterclockwise and remove it from the headlight housing, as shown above.

  5. Install the new bulb into the housing and rotate it clockwise 90° to lock it in place.

    NOTICE

    Make sure the tab on the bulb locates properly in the housing.

  6. Install the harness onto the new headlight bulb and install the hood.

7.7.15.2: Headlight Beam Adjustment

To adjust the headlight beam, do the following:

  1. Ensure the tire pressure of all tires is at recommended levels.

  2. Place the vehicle on a level surface with the headlight approximately 25 ft. (7.6 m) from a dark wall.

  3. Measure the distance from the floor to the center of the headlight and make a mark on the wall at the same height.

  4. Apply the brakes. Start the engine. Turn on the low-beam headlights.

  5. Observe the headlight aim. The most intense part of the headlight beam should be aimed 8" (20 cm) below the mark placed on the wall. Include the weight of a rider on the seat while performing this step.

  6. If a headlight needs adjustment, locate the three adjustment screws at the back of each headlight (one on top, two on the bottom).

  7. Rotate the adjustment screw to adjust the headlight as needed.

7.7.15.3: Brake Lights

When the brake pedal is depressed, the brake light comes on. Check the brake light before each ride.

To check the brake lights, do the following:

  1. Turn the key to the ON position.

  2. Depress the brake pedal. The brake light should come on after about 0.4 in (10 mm) of pedal travel. If the light doesn't come on, check the bulb.

7.7.16: Fuses

If the engine stops or will not start, or if you experience other electrical failures, a fuse may need replacement. Locate and correct any short circuits that may have caused the blown fuse, then replace the fuse. The fuse box is located under the middle seat. Spare fuses are provided in the fuse box. If you suspect that a fuse or relay may not be working properly, your dealer can assist.

RANGER XP 1000 Fuse Chart

Fuse Size Feature Supported
20A Chassis
20A EFI
15A Fuel Pump
20A Lights
15A Drive System
10A ACC Plug & Play
20A Accessory
30A EPS

RANGER XP 1000 NorthStar Edition Fuse Chart

Fuse Size Feature Supported
20A Chassis
20A EFI
15A Fuel Pump
20A Lights
15A Drive System
15A Alternator (S)
15A Alternator (L)
20A Accessory
30A EPS
30A HVAC
30A FAN
15A Display
20A Amp

RANGER XP 1000 Winter Prep Package Fuse Chart

Fuse Size Feature Supported
20A Accessory
10A ACC Plug &Play
20A Lights
15A Amp
15A Drive System
15A Fuel Pump
20A Chassis
30A EPS
20A EFI
20A Heater
30A Spare
20A Spare
15A Spare
10A Spare

7.7.17: Battery

WARNING

Battery electrolyte is poisonous. It contains sulfuric acid. Serious burns can result from contact with skin, eyes or clothing.

Antidote:

External: Flush with water.

Internal: Drink large quantities of water or milk. Follow with milk of magnesia, beaten egg, or vegetable oil. Call physician immediately.

Eyes: Flush with water for 15 minutes and get prompt medical attention.

Batteries produce explosive gases. Keep sparks, flame, cigarettes, etc. away. Ventilate when charging or using in an enclosed space. Always shield eyes when working near batteries. KEEP OUT OF REACH OF CHILDREN.

Your vehicle has a low-maintenance flooded battery. It does not require refilling.

Always keep battery terminals and connections free of corrosion. If cleaning is necessary, remove the corrosion with a stiff wire brush. Wash with a solution of one tablespoon baking soda and one cup water. Rinse well with tap water and dry off with clean shop towels. Coat the terminals with dielectric grease or petroleum jelly. Be careful not to allow cleaning solution or tap water into a conventional battery.

WARNING

Improperly connecting or disconnecting battery cables can result in an explosion and cause serious injury or death. When removing the battery, always disconnect the negative (black) cable first. When reinstalling the battery, always connect the negative (black) cable last.

7.7.17.1: Battery Charging

WARNING
An overheated battery may explode, causing severe injury or death. Always watch charging times carefully. Stop charging if the battery becomes very warm to the touch. Allow it to cool before resuming charging.

The battery is already filled with electrolyte. Never pry off the vent caps or fill the battery with water or electrolyte.

The single most important thing about maintaining a battery is to keep it fully charged. Check the battery voltage with a voltmeter or multimeter. A fully charged battery will register 12.8 V or higher. If the voltage falls below 12.5V, charge it immediately, or the battery runs the risk of sulfation and reduced battery life.

If you do not drive the vehicle for more than TWO WEEKS, Polaris recommends using a BatteryMINDer® 1510 1.5 AMP (PN 2830404) or 12V 1.5 AMP Convertible BatteryMINDer® (PN 2830511), which can be ordered through your dealer. During charging, place the charger outside of the vehicle and protect it from moisture.

NOTICE

For added convenience Polaris offers an adapter (PN 2414957)1 which allows easy connection to the vehicle's battery. Open the hood to access the outlet, located along the back wall.

If you plan to store the vehicle for ONE MONTH or longer, remove the battery from the vehicle, then store the battery in a cool and dry location. Continue to maintain the battery.

When using an automatic charger, refer to the charger manufacturer's instructions for recharging.

7.7.17.2: Battery Installation

  1. Ensure that the battery is fully charged.

  2. Place the battery in the battery holder.

  3. Coat the terminals with dielectric grease or petroleum jelly.

  4. Connect and tighten the red (positive) cable first.

  5. Connect and tighten the black (negative) cable last.

  6. Install the battery hold-down strap and tighten the screws.

  7. Verify that cables are properly routed.

  8. Reinstall the seat.

7.7.17.3: Battery Removal

WARNING
Improperly connecting or disconnecting battery cables can result in an explosion and cause serious injury or death. When removing the battery, always disconnect the negative (black) cable first. When reinstalling the battery, always connect the negative (black) cable last.

To remove the battery, do the following:

  1. Remove the storage bin under the passenger seat to access the battery.

  2. Disconnect the black (-) battery cable first. Disconnect the red (+) battery cable last.

  3. Remove the battery hold-down strap.

  4. Lift the battery out of the vehicle. Be careful not to tip a flooded battery sideways, which could spill electrolyte.

NOTICE
If electrolyte spills, immediately wash it off with a solution of one tablespoon baking soda and one cup water to prevent damage to the vehicle.

7.7.17.4: Battery Storage

Whenever the vehicle is not used for a period of three months or more, remove the battery from the vehicle, ensure that it's fully charged, and store it out of the sun in a cool, dry place. Check battery voltage each month during storage and recharge as needed to maintain a full charge.

TIP

Battery charge can be maintained by using a Polaris battery trickle charger or by charging about once a month to make up for normal self discharge. The battery trickle charger can be left connected during the storage period, and will automatically charge the battery if the voltage drops below a predetermined point.

7.7.18: Cleaning and Storage

7.7.18.1: Washing the Vehicle

Keeping your POLARIS vehicle clean will not only improve its appearance but it can also extend the life of various components.

NOTICE
High water pressure may damage components. POLARIS recommends washing the vehicle by hand or with a garden hose, using mild soap.
NOTICE
Certain products, including insect repellents and chemicals, will damage plastic surfaces. Do not allow these types of products to contact the vehicle.

The best and safest way to clean your POLARIS vehicle is with a garden hose and a pail of mild soap and water.

  1. Use a professional-type washing cloth, cleaning the upper body first and the lower parts last.

  2. Rinse with clean water frequently.

  3. Dry surfaces with a chamois to prevent water spots.

7.7.18.1.1: Washing Tips
  • Avoid the use of harsh cleaners, which can scratch the finish.

  • Do not use a power washer to clean the vehicle.

  • Do not use medium to heavy duty compounds on the finish.

  • Always use clean cloths and pads for cleaning and polishing. Old or reused cloths and pads may contain dirt particles that will scratch the finish.

  • Grease all zerk fittings immediately after washing. Allow the engine to run for a while to evaporate any water that may have entered the engine or exhaust system.

If a high pressure water system is used for cleaning (not recommended), exercise extreme caution. The water may damage components and could remove paint and labels. Avoid directing the water stream at the following items:

  • Wheel bearings

  • Radiator

  • Transmission seals

  • Brakes

  • Door seals (if equipped)

  • Cab and body panels

  • Labels and decals

  • Electrical components and wiring

  • Air intake components

  • Window seals (if equipped)

If an informational or graphic label becomes illegible or comes off, contact your POLARIS dealer, or other qualified person, to purchase a replacement. Replacement safety labels are provided by POLARIS at no charge.

7.7.18.2: Polishing the Vehicle

POLARIS recommends the use of common household aerosol furniture polish for polishing the finish on your POLARIS vehicle. Follow the instructions on the container.

7.7.18.2.1: Polishing Tips
  • Avoid the use of automotive products, some of which can scratch the finish of your vehicle.

  • Always use clean cloths and pads for cleaning and polishing. Old or reused cloths and pads may contain dirt particles that will scratch the finish.

7.7.18.3: Chrome Wheel Care (if equipped)

Proper maintenance will protect chrome wheels from corrosion, preserve wheel life and ensure a “like new” appearance for many years. Chrome wheels exposed to road salt (or salt in the air in coastal areas) are more susceptible to corrosion if not properly cleaned. Clean chrome wheels more often if they're exposed to salt or other corrosive elements.

  1. Wash chrome wheels frequently. Use a mild detergent. Never use abrasive cleaners on plated or painted surfaces.

  2. Rinse well with clear water. Soap, detergents, salt, dirt, mud and other elements can cause corrosion.

  3. Polish the clean chrome wheels periodically. Use an automotive grade chrome polish.

  4. Routinely and liberally apply a weather resistant wax to each polished chrome wheel. Choose a product suitable for chrome finishes. Read and follow the product labels and instructions.

7.7.18.3.1: Removing Corrosion

If light rust is found on the chrome finish, use steel wool (#0000-OTT grade) to remove it. Gently rub the affected areas with the steel wool until the corrosion has been removed. Clean and polish the wheel as outlined above.

7.7.18.4: Storage Tips

NOTICE

Starting the engine during the storage period will disturb the protective film created by fogging and damage could occur. Never start the engine during the storage period.

7.7.18.4.1: Clean the Exterior

Make any necessary repairs and clean the vehicle as recommended.

7.7.18.4.2: Stabilize the Fuel
  1. Fill the fuel tank.

  2. Add POLARIS Carbon Clean Fuel Treatment or POLARIS Fuel Stabilizer or equivalent fuel treatments or stabilizers. Follow the instructions on the container for the recommended amount. Carbon Clean removes water from fuel systems, stabilizes fuel and removes carbon deposits from pistons, rings, valves and exhaust systems.

  3. Allow the engine to run for 15-20 minutes to allow the stabilizer to disperse through the entire fuel delivery system.

7.7.18.4.3: Oil and Filter

Change the oil and filter. See the Engine Oil section.

7.7.18.4.4: Air Filter / Air Box

Replace the air filter. See Maintenance Chapter. Clean the air box.

7.7.18.4.5: Fluid Levels

Inspect the fluid levels. Add or change fluids as recommended in the Periodic Maintenance Chart.

  • Demand drive fluid (front gearcase)

  • Rear gearcase fluid (if equipped)

  • Transmission fluid

  • Brake fluid (change every two years and any time the fluid looks dark or contaminated)

  • Coolant (test strength/fill)

7.7.18.4.6: Inspect and Lubricate

Inspect all cables and lubricate all areas of the vehicle as recommended in the Periodic Maintenance Chart.

7.7.18.4.7: Fog the Engine
  1. Treat the fuel system with POLARIS Carbon Clean or other equivalent fuel treatment. Follow the instructions on the container. Start the engine. Allow it to idle for several minutes so the Carbon Clean reaches the injectors. Stop the engine.

  2. Remove the spark plugs and add 1–1.5 oz. (29.5–44 cc.) of engine oil. To access the plug holes, use a section of clear 6 mm (1/4”) hose and a small plastic squeeze bottle filled with the pre-measured amount of oil. Do this carefully! If you miss the plug holes, oil will drain from the spark plug cavities into the hole at the front of the cylinder head, and appear to be an oil leak.

  3. Reinstall the spark plugs. Torque to specification.

  4. Apply dielectric grease to the inside of each spark plug cap. Do not reinstall the cap onto the plug at this step.

  5. Turn the engine over several times. Oil will be forced in and around the piston rings and ring lands, coating the cylinder with a protective film of fresh oil.

  6. Reinstall the spark plug caps.

  7. If POLARIS fuel system additive is not used, fuel tank, fuel lines, and injectors should be completely drained of gasoline.

7.7.18.4.8: Storage Area / Covers

Be sure the storage area is well ventilated. Cover the vehicle with a genuine POLARIS cover. Do not use plastic or coated materials. They do not allow enough ventilation to prevent condensation, and may promote corrosion and oxidation.

7.7.18.5: Removal from Storage

WARNING

Engine exhaust contains poisonous carbon monoxide and can cause loss of consciousness or death. Never run an engine in an enclosed area.

  1. Check the battery electrolyte level and charge the battery if necessary. Install it in the vehicle. Make sure the battery vent hose is routed properly and that it's not pinched or restricted in any way.

  2. Make sure spark plugs are tight.

  3. Fill the fuel tank with fuel.

  4. Check all the points listed in the Daily Pre-Ride Inspection. Tightness of the bolts, nuts and other fasteners should be checked by an authorized dealer or other qualified service facility.

  5. Lubricate at the intervals outlined in the Periodic Maintenance Chart.

7.7.18.6: Transporting the Vehicle

Follow these procedures when transporting the vehicle.

  1. Apply the brakes.

  2. Place the transmission in PARK. Stop the engine.

  3. Slowly release the brake pedal and make sure the transmission is in PARK before exiting the vehicle. Engage the park brake.

  4. Remove the key to prevent loss during transporting.

  5. Secure the fuel cap (if equipped) and seat. Ensure that the seat is attached correctly and is not loose.

    WARNING

    Cargo and other loose vehicle parts may fly off while transporting this vehicle. Secure or remove all cargo, and inspect the unit for loose parts prior to transport.

  6. Always tie the frame of the vehicle to the transporting unit securely with suitable straps or rope. Do not attach tie straps to the front control arm bolt pockets.

8.1 RANGER XP 1000

Description Specification
Maximum Weight Capacity (includes weight of operator, passenger, cargo, accessories)

1500 lb (680 kg) (including operator, passengers, cargo, accessories)

CA Models: 1100 lb (499 kg)

Dry Weight* 1565 lb (709.9 kg)

CA Models: 1570 lb (712 kg)

Test GVW - Rollover Protection System (ROPS) 3600 lbs. (1633 kg) per OSHA 29 CFR 1928.53
Fuel Capacity 11.5 gal (43.5 l)
Engine Oil Capacity 2.5 qt (2.4 l)
Coolant Capacity 5 qt (4.75 l)
Overall Length 120 in (305 cm)
Overall Width 62.5 in (159 cm)
Overall Height 77 in (195 cm)
Wheelbase 81 in (206 cm)
Cargo Box Dimensions (Inside) 36.75 x 54.25 x 12.5 in (93 x 138 x 32 cm)
Ground Clearance 13 in (33 cm)
Min. Turning Radius 158 in (401 cm)
Towing Capacity 2500 lb (1136 kg)
Hitch Tongue Capacity 250 lb (113 kg)
Max. Cargo Box Load

1000 lb (454 kg)

CA Models: 600 lb (272 kg)

Engine 4-Stroke DOHC Twin Cylinder
Displacement 999 cc
Bore x Stroke (mm) 93 mm x 64.4 mm
Stator Output 660 W @ 3000 RPM
Compression Ratio 10.8:1
Starting System Electric
Fuel System Electronic Fuel Injection
Ignition Timing ECU Controlled
32° +/- 2° @ 5000 RPM
Spark Plug/ Gap MR7F / 0.7-0.8 mm
Lubrication System Wet Sump
Cooling Liquid
Front Suspension Dual A-Arm 11.0 in (27.9 cm) Travel
Rear Suspension Dual A-Arm, IRS 11.0" (27.94 cm) Travel
Ignition System Digital CDI
Driving System Type PVT
Shift Type Single Lever (H/L/N/R/P)
Gear Reduction - Low Front 9.65:1/ Rear 28.84:1
Gear Reduction - Reverse Front 9.16:1 / Rear 27.39:1
Gear Reduction - High Front 4.35:1 / Rear 13.01:1
Drive Ratio - Front 3.23:1
Tire Size - Front 27 x 9-12; Maxxis® MU511
Tire Size - Rear 27 x 11-12; Maxxis® MU521
Tire Pressure - Front 10 psi (69 kPa)
Tire Pressure - Rear 16 psi (110 kPa)
Brakes, Front/Rear Foot Activated, 4 wheel hydraulic disc with dual-bore front calipers
Hood Headlights 2 single beam, 55W low/60W high, quartz/halogen
Taillights 10 L.E.D. (.28W)
Brake Light 10 L.E.D. (3.1W)

*Dry weight is also listed on the Certificate of Origin for your vehicle in the Shipping Weight field. The dry weight is estimated based on the manufactured weight of the vehicle minus any serviceable fluids  and may also exclude the weight of factory installed accessories not essential to the vehicle’s basic operation as outlined in the ANSI®/ROHVA® 1-2016 standard.

8.2 RANGER CREW XP 1000

Description Specification
Maximum Weight Capacity (includes weight of operator, passenger, cargo, accessories) 1750 lb (794 kg) (including operator, passengers, cargo, accessories)

CA Models: 1350 lb (612.3 kg)

Dry Weight* 1829 lb (839 kg)

CA Models: 1834 lb (831.9 kg)

Test GVW - Rollover Protection System (ROPS) 3750 lb (1700.9 kg) per OSHA 29 CFR 1928.53
Fuel Capacity 11.5 gal (43.5 l)
Engine Oil Capacity 2.5 qt (2.4 l)
Coolant Capacity 6 qt (5.7 l)
Overall Length 152 in. (385 cm)
Overall Width 62.5 in. (159 cm)
Overall Height 77 in. (195 cm)
Wheelbase 113 in (287 cm)
Cargo Box Dimensions (Inside) 36.75 x 54.25 x 12.5 in. (93 x 138 x 32 cm)
Ground Clearance 13 in (33 cm)
Min. Turning Radius 199 in. (507 cm)
Towing Capacity 2500 lbs. (1136 kg)
Hitch Tongue Capacity 250 lbs. (113 kg)
Max. Cargo Box Load 1,000 lbs (454 kg)

CA Models: 600 lbs (272 kg)

Engine 4-Stroke DOHC Twin Cylinder
Displacement 999 cc
Bore x Stroke (mm) 93 mm x 64.4 mm
Stator Output 660 W @ 3000 RPM
Compression Ratio 10.8:1
Starting System Electric
Fuel System Electronic Fuel Injection
Ignition Timing ECU Controlled
32° +/- 2° @ 5000 RPM
Spark Plug/ Gap MR7F / 0.7-0.8 mm
Lubrication System Wet Sump
Cooling Liquid
Front Suspension Dual A-Arm 11.0 in (27.9 cm) Travel
Rear Suspension Dual A-Arm, IRS 11.0" (27.94 cm) Travel
Ignition System Digital CDI
Driving System Type PVT
Shift Type Single Lever (H/L/N/R/P)
Gear Reduction - Low Front 9.65:1/ Rear 28.84:1
Gear Reduction - Reverse Front 9.16:1 / Rear 27.39:1
Gear Reduction - High Front 4.35:1 / Rear 13.01:1
Drive Ratio - Front 3.23:1
Tire Size - Front 27 x 9-12; Maxxis® MU511
Tire Size - Rear 27 x 11-12; Maxxis® MU521
Tire Pressure - Front 18 psi (124 kPa)
Tire Pressure - Rear 20 psi (137.8 kPa)
Brakes, Front/Rear Foot Activated, 4 wheel hydraulic disc with dual-bore front calipers
Hood Headlights 2 single beam, 55W low/60W high, quartz/halogen
Taillights 10 L.E.D. (.28W)
Brake Light 10 L.E.D. (3.1W)

*Dry weight is also listed on the Certificate of Origin for your vehicle in the Shipping Weight field. The dry weight is estimated based on the manufactured weight of the vehicle minus any serviceable fluids  and may also exclude the weight of factory installed accessories not essential to the vehicle’s basic operation as outlined in the ANSI®/ROHVA® 1-2016 standard.

8.3 RANGER XP 1000 NorthStar Edition

Description Specification
Maximum Weight Capacity (includes weight of operator, passenger, cargo, accessories) 1275 lbs. (578 kg) (including operator, passengers, cargo, accessories)
Dry Weight 1,875 lbs (850 kg)
Test GVW - Rollover Protection System (ROPS) 3600 lbs. (1633 kg) per OSHA 29 CFR 1928.53
Fuel Capacity 11.5 gal (43.5 L)
Engine Oil Capacity 2.5 qts. (2.4 l)
Coolant Capacity 5 qts. (4.75 l)
Overall Length 120 in. (305 cm)
Overall Width 65 in. (165 cm)
Overall Height 78 in. (198 cm)
Wheelbase 81 in (206 cm)
Cargo Box Dimensions (Inside) 36.75 x 54.25 x 12.5 in. (93 x 138 x 32 cm)
Ground Clearance 13 in (33 cm)
Min. Turning Radius 158 in. (401.3 cm)
Towing Capacity 2500 lbs. (1133 kg)
Hitch Tongue Capacity 250 lbs. (113 kg)
Max. Cargo Box Load 1,000 lb (454 kg)
CA Model : 600 lbs (272 kg)
Engine 4-Stroke DOHC Twin Cylinder
Displacement 999 cc
Bore x Stroke (mm) 93 mm x 73.6 mm
Alternator Output 1288 W @ 5000 RPM
Compression Ratio 10.8:1
Starting System Electric
Fuel System Electronic Fuel Injection
Ignition Timing ECU Controlled
32° +/- 2° @ 5000 RPM
Spark Plug/ Gap MR7F / 0.7-0.8 mm
Lubrication System Wet Sump
Cooling Liquid
Front Suspension Dual A-Arm 11.0 in (27.9 cm) Travel
Rear Suspension Dual A-Arm, IRS 11.0 in (27.9 cm) Travel
Ignition System Digital CDI
Driving System Type PVT
Shift Type Single Lever (H/L/N/R/P)
Gear Reduction - Low Front 9.65:1 / Rear 28.84:1
Gear Reduction - Reverse Front 9.16:1 / Rear 27.39:1
Gear Reduction - High Front 4.35:1 / Rear 13.01:1
Drive Ratio - Front 3.23:1
Tire Size - Front 27 x 9-12; Maxxis MU511
Tire Size - Rear 27 x 11-12; Maxxis MU521
Tire Pressure - Front 14 psi (96 kPa)
Tire Pressure - Rear 16 psi (110 kPa)
Brakes, Front/Rear Foot Activated, 4 wheel hydraulic disc with dual-bore front calipers
Hood Headlights 2 single beam, 55W low/60W high, quartz/halogen
Taillights 10 L.E.D. (.28W)
Brake Light 10 L.E.D. (3.1W)

8.4 RANGER CREW XP 1000 NorthStar Edition

Description Specification
Maximum Weight Capacity (includes weight of operator, passenger, cargo, accessories)

1350 lb (612 kg) (including operator, passengers, cargo, accessories)

CA Models: 1350 lb (612 kg)

Dry Weight*

2290 lb (1039 kg)

CA Models: 2295 lb (1040.9 kg)

Test GVW - Rollover Protection System (ROPS) 3750 lb (1700 kg) per OSHA 29 CFR 1928.53
Fuel Capacity 11.5 gal (43.5 l)
Engine Oil Capacity 2.5 qt (2.4 l)
Coolant Capacity 6 qt (5.7 l)
Overall Length 152 in (386 cm)
Overall Width 65 in (165 cm)
Overall Height 78 in (198 cm)
Wheelbase 113 in (287 cm)
Cargo Box Dimensions (Inside) 36.75 x 54.25 x 12.5 in (93 x 138 x 32 cm)
Ground Clearance 13 in (33 cm)
Min. Turning Radius 200 in (508 cm)
Towing Capacity 2500 lb (1133 kg)
Hitch Tongue Capacity 250 lb (113 kg)
Max. Cargo Box Load

1000 lb (454 kg)

CA Model: 600 lb (272 kg)

Engine 4-Stroke DOHC Twin Cylinder
Displacement 999 cc
Bore x Stroke (mm) 93 mm x 73.6 mm
Alternator Output 1288 W @ 5000 RPM
Compression Ratio 10.8:1
Starting System Electric
Fuel System Electronic Fuel Injection
Ignition Timing ECU Controlled
32° +/- 2° @ 5000 RPM
Spark Plug/ Gap MR7F / 0.7-0.8 mm
Lubrication System Wet Sump
Cooling Liquid
Front Suspension Dual A-Arm 11.0 in (27.9 cm) Travel
Rear Suspension Dual A-Arm, IRS 11.0 in (27.9 cm) Travel
Ignition System Digital CDI
Driving System Type PVT
Shift Type Single Lever (H/L/N/R/P)
Gear Reduction - Low Front 9.65:1 / Rear 28.84:1
Gear Reduction - Reverse Front 9.16:1 / Rear 27.39:1
Gear Reduction - High Front 4.35:1 / Rear 13.01:1
Drive Ratio - Front 3.23:1
Tire Size - Front 27 x 9-12; Maxxis® MU511
Tire Size - Rear 27 x 11-12; Maxxis® MU521
Tire Pressure - Front 18 psi (124 kpa)
Tire Pressure - Rear 20 psi (138 kpa)
Brakes, Front/Rear Foot Activated, 4 wheel hydraulic disc with dual-bore front calipers
Hood Headlights 2 single beam, 55W low/60W high, quartz/halogen
Taillights 10 L.E.D. (.28W)
Brake Light 10 L.E.D. (3.1W)

*Dry weight is also listed on the Certificate of Origin for your vehicle in the Shipping Weight field. The dry weight is estimated based on the manufactured weight of the vehicle minus any serviceable fluids and may also exclude the weight of factory installed accessories not essential to the vehicle’s basic operation as outlined in the ANSI®/ROHVA® 1-2016 standard.

Chapter 8: POLARIS Products

8.8.1: Lubricants / Service Products

Product

Size (quantity)

Quantity

Part Number

Fogging Oil

12 floz (355 ml) aerosol

12

2870791

1 qt (0.95 l)

12

2871517

PS-4

1 qt (0.95 l)

12

2876244

2 qt (1.90 l)

8

2877490

1 gal (3.8 l)

4

2876245

PS-4 Extreme Duty

1 qt (0.95 l)

12

2878920

2 qt (1.90 l)

8

2878922

1 gal (3.8 l)

4

2878919

1 qt (0.95 l)

12

2889395

1 gal (3.8 l)

4

2889396

AGL

1 qt (0.95 l)

12

2878068

1 gal (3.8 l)

4

2878069

Pump for Gallon Jug

1

2870465

Demand Drive

1 qt (0.95 l)

12

2877922

2.5 gal (9.5 l)

2

2877923

Antifreeze / Coolant

1 qt (0.95 l)

12

2880514

1 gal (3.8 l)

6

2880513

Grease Gun Kit, Premium All Season

1

2871312

All Season Grease

Four 3 floz (89 ml) packs

6

2871322

14 floz (414 ml) cartridge

1

2871423

Premium Starter Grease

1

2871460

U-Joint Grease

3 floz (89 ml) tube

24

2871515

14 floz (414 ml) cartridge

1

2871551

Dielectric Grease (Nyogel®)

1

2871329

Carbon Clean

12 floz (355 ml) bottle

12

2871326

Fuel Stabilizer

16 floz (473 ml)

12

2870652

2.5 gal (9.5 l)

2

2872280

DOT 4 Brake Fluid

1

2872189

Loctite® 565 Thread Sealant

1

2871956

BatteryMINDer® 2012 AGM - 2 AMP Charger

1

2830438

Chapter 9: Troubleshooting

9.9.1: Drive Belt Wear/Burn

Possible Cause

Solution

Driving onto a pickup or tall trailer in high range

Use low range during loading.

Starting out going up a steep incline

Use low range.

Driving at low RPM or ground speed – 3–7 mph (4.8–11.3 kph)

Drive at a higher speed or use low range more frequently.

Insufficient warm-up at low ambient temperatures

Warm the engine at least 5 minutes. With the transmission in neutral, advance the throttle to about 1/8 throttle in short bursts, 5 to 7 times. The belt will become more flexible and prevent belt burning.

Slow/easy clutch engagement

Use the throttle quickly and effectively.

Towing/pushing at low RPM/low ground speed

Use low range only.

Utility use/plowing

Use low range only.

Stuck in mud or snow

Shift the transmission to low range and carefully use fast, aggressive throttle application to engage clutch.


WARNING: Excessive throttle may cause loss of control and vehicle rollover.

Climbing over large objects from a stopped position

Shift the transmission to low range and carefully use fast, brief, aggressive throttle application to engage clutch.


WARNING: Excessive throttle may cause loss of control and vehicle rollover.

Belt slippage from water or snow ingestion into the PVT system

Dry out the PVT. Prevent water from entering the PVT intake duct. See Intake Pre-Filters for more information. Inspect clutch seals for damage if repeated leaking occurs.

Clutch malfunction

An authorized dealer can assist.

Poor engine performance

Check for clogged air filter, clogged fuel filter, water in the fuel or foreign material in fuel tank or fuel lines. An authorized dealer can assist.

Slippage from failure to warm up belt

Always warm up the belt by operating below 30 mph (48 kph) for 1 mi (1.6 km) (5 mi (8 km) or more when temperature is below freezing).

Wrong or missing belt

Install the recommended belt.

Improper break-in

Always break in a new belt and/or clutch.

9.9.2: Engine Doesn't Turn Over

Possible Cause Solution
Low battery voltage Recharge the battery.
Loose battery connections Check all connections and tighten.
Loose solenoid connections Check all connections and tighten.
Loose electronic control box connections Inspect, clean, reinstall connectors.

9.9.3: Engine Turns Over, Fails to Start

Possible Cause Solution
Out of fuel Refuel.
Water is present in fuel Drain the fuel system and refuel.
Old or non-recommended fuel Replace with fresh recommended fuel.
Fouled or defective spark plug Inspect plug and replace if necessary.
No spark to spark plug Inspect plug and replace if necessary.
Water or fuel in crankcase Your authorized dealer can assist.
Low battery voltage Recharge the battery to 12.8 VDC.
Mechanical failure Your authorized dealer can assist.

9.9.4: Engine Backfires

Possible Cause Solution
Weak spark from spark plug Inspect, clean and/or replace spark plug
Incorrect spark plug gap or heat range Set gap to specs or replace plug
Old or non-recommended fuel Replace with fresh recommended fuel
Incorrectly installed spark plug wires Your authorized dealer can assist
Mechanical failure Your authorized dealer can assist
Loose ignition connections Check all connections and tighten
Water present in fuel Replace with fresh recommended fuel

9.9.5: Engine Pings or Knocks

Possible Cause Solution
Poor quality or low octane fuel Replace with recommended fuel
Incorrect spark plug gap or heat range Set gap to specs or replace plug

9.9.6: Engine Runs Irregularly, Stalls or Misfires

Possible Cause Solution
Fouled or defective spark plug Inspect, clean and/or replace spark plug
Worn or defective spark plug wires Your authorized dealer can assist
Incorrect spark plug gap or heat range Set gap to specs or replace plug
Loose ignition connections Check all connections and tighten
Water present in fuel Replace with new fuel
Low battery voltage Recharge battery to 12.8 VDC
Incorrect fuel Replace with recommended fuel
Clogged air filter Inspect and clean or replace
Clogged intake pre-filter Inspect and clean (with soapy water) or replace
Other mechanical failure Your authorized dealer can assist

9.9.7: Engine Stops or Loses Power

Possible Cause Solution
Out of fuel Refuel
Kinked or plugged fuel vent line Inspect and replace
Water is present in fuel Replace with new fuel
Fouled or defective spark plug Inspect, clean and/or replace spark plug
Worn or defective spark plug wires Your authorized dealer can assist
Incorrect spark plug gap or heat range Set gap to specs or replace plug
Loose ignition connections Check all connections and tighten
Low battery voltage Recharge the battery
Incorrect fuel Replace with fresh recommended fuel
Clogged air filter Inspect and clean or replace
Clogged intake pre-filter Inspect and clean (with soapy water) or replace
Other mechanical failure Your authorized dealer can assist
Overheated engine Clean radiator screen and core, clean engine exterior, and check coolant level. Your dealer can assist.

Chapter 10: Warranty

10.10.1: Limited Warranty

POLARIS Inc., 2100 Highway 55, Medina, MN 55340 (POLARIS) gives a ONE YEAR LIMITED WARRANTY on all components of your POLARIS vehicle against defects in material or workmanship. Laws and regulations in your jurisdiction may give extra protection. POLARIS further warrants that the spark arrester in this product will meet the efficiency requirements of USFS standard 5100-1C for at least 1000 hours when subjected to normal use and when maintenance and installation are in accordance with POLARIS recommendations.

This warranty covers parts and labor charges for repair or replacement of defective parts and begins on the date of purchase by the original retail purchaser. This warranty is transferable to another owner during the warranty period through a POLARIS dealer, but any such transfer will not extend the original term of the warranty. The duration of this warranty may vary by international region based upon local laws and regulations.

10.10.2: Registration

At the time of sale, the Warranty Registration Form must be completed by your dealer and submitted to POLARIS within ten days of purchase. Upon receipt of this registration, POLARIS will record the registration for warranty. No verification of registration will be sent to the purchaser as the copy of the Warranty Registration Form will be your proof of warranty coverage. If you have not signed the original registration and received the customer copy, please contact your dealer immediately. NO WARRANTY COVERAGE WILL BE ALLOWED UNLESS YOUR VEHICLE IS REGISTERED WITH POLARIS. Initial dealer preparation and set-up of your vehicle is very important in ensuring trouble-free operation. Purchasing a machine in the crate or without proper dealer set-up will void your warranty coverage.

10.10.3: Warranty Coverage And Exclusions

10.10.3.1: Limitations Of Warranties And Remedies

This POLARIS limited warranty excludes any failures that are not caused by a defect in material or workmanship. THIS WARRANTY DOES NOT COVER CLAIMS OF DEFECTIVE DESIGN. This warranty also does not cover acts of God, accidental damage, normal wear and tear, abuse or improper handling. This warranty also does not cover any vehicle, component, or part that has been altered structurally, modified, neglected, improperly maintained or used for racing, competition or purposes other than for which it was designed.

This warranty excludes damages or failures resulting from improper lubrication; improper engine timing; improper fuel; surface imperfections caused by external stress, heat, cold or contamination; operator error or abuse; improper component alignment, tension, adjustment or altitude compensation; snow, water, dirt or other foreign substance ingestion/contamination; improper maintenance; modified components; use of aftermarket or unapproved components, accessories, or attachments; use of unapproved software or calibration; unauthorized repairs; or repairs made after the warranty period expires or by an unauthorized repair center.

This warranty excludes damages or failures caused by abuse, accident, fire, or any other cause other than a defect in materials or workmanship and provides no coverage for consumable components, general wear items, or any parts exposed to friction surfaces, stresses, environmental conditions and/or contamination for which they were not designed or not intended, including but not limited to the following items:

  • Wheels and tires

  • Suspension components

  • Brake components

  • Seat components

  • Clutches and components

  • Steering components

  • Batteries

  • Light bulbs/Sealed beam lamps

  • Filters

  • Lubricants

  • Bushings

  • Finished and unfinished surfaces

  • Carburetor/Throttle body components

  • Engine components

  • Drive belts

  • Hydraulic components and fluids

  • Circuit breakers/Fuses

  • Electronic components

  • Spark plugs

  • Sealants

  • Coolants

  • Bearings

10.10.3.2: Lubricants and Fluids

  1. Mixing oil brands or using non-recommended oil may cause engine damage. We recommend the use of POLARIS engine oil.

  2. Damage or failure resulting from the use of non-recommended lubricants or fluids is not covered by this warranty.

This warranty provides no coverage for personal loss or expense, including mileage, transportation costs, hotels, meals, shipping or handling fees, product pick-up or delivery, replacement rentals, loss of product use, loss of profits, or loss of vacation or personal time.

THE EXCLUSIVE REMEDY FOR BREACH OF THIS WARRANTY SHALL BE, AT POLARIS' OPTION, REPAIR OR REPLACEMENT OF ANY DEFECTIVE MATERIALS, COMPONENTS, OR PRODUCTS. THE REMEDIES SET FORTH IN THIS WARRANTY ARE THE ONLY REMEDIES AVAILABLE TO ANY PERSON FOR BREACH OF THIS WARRANTY. POLARIS SHALL HAVE NO LIABILITY TO ANY PERSON FOR INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES OF ANY DESCRIPTION, WHETHER ARISING OUT OF EXPRESS OR IMPLIED WARRANTY OR ANY OTHER CONTRACT, NEGLIGENCE, OR OTHER TORT OR OTHERWISE. THIS EXCLUSION OF CONSEQUENTIAL, INCIDENTAL, AND SPECIAL DAMAGES IS INDEPENDENT FROM AND SHALL SURVIVE ANY FINDING THAT THE EXCLUSIVE REMEDY FAILED OF ITS ESSENTIAL PURPOSE.

THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE IS EXCLUDED FROM THIS LIMITED WARRANTY. ALL OTHER IMPLIED WARRANTIES (INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILITY) ARE LIMITED IN DURATION TO THE ABOVE ONE YEAR WARRANTY PERIOD. POLARIS DISCLAIMS ALL EXPRESS WARRANTIES NOT STATED IN THIS WARRANTY. SOME STATES DO NOT PERMIT THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES OR ALLOW LIMITATIONS ON THE DURATION OF IMPLIED WARRANTIES, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU IF INCONSISTENT WITH CONTROLLING STATE LAW.

10.10.4: How To Obtain Warranty Service

If your vehicle requires warranty service, you must take it to a POLARIS Servicing Dealer. When requesting warranty service you must present your copy of the Warranty Registration Form to the dealer. (THE COST OF TRANSPORTATION TO AND FROM THE DEALER IS YOUR RESPONSIBILITY.) POLARIS suggests that you use your original selling dealer; however, you may use any POLARIS Servicing Dealer to perform warranty service.

10.10.4.1: In the Country where your product was purchased:

Warranty or Service Bulletin repairs must be done by an authorized POLARIS dealer, or other qualified person. If you move or are traveling within the country where your product was purchased, Warranty and Service Bulletin repairs may be requested from any authorized POLARIS dealer, or other qualified person, that sells the same line as your product.

10.10.4.2: Outside the Country where your product was purchased:

If you are traveling temporarily outside the country where your product was purchased, you should take your product to an authorized POLARIS dealer, or other qualified person. You must show the dealer photo identification from the country of the selling dealer's authorized location as proof of residence. Upon residence verification, the servicing dealer will be authorized to perform the warranty repair.

10.10.4.3: If you move:

If you move to another country, be sure to contact POLARIS Customer Assistance and the customs department of the destination country before you move. Product importation rules vary considerably from country to country. You may be required to present documentation of your move to POLARIS in order to continue your warranty coverage. You may also be required to obtain documentation from POLARIS in order to register your product in your new country. You should warranty register your product at a local POLARIS dealer in your new country immediately after you move to continue your warranty coverage and to ensure that you receive information and notices regarding your product.

10.10.4.4: If you purchase from a private party:

If you purchase a POLARIS product from a private party, to be kept and used outside of the country in which the product was originally purchased, all warranty coverage will be denied. You must nonetheless register your product under your name and address with a local POLARIS dealer in your country to ensure that you receive safety information and notices regarding your product.

10.10.5: Exported Products

EXCEPT WHERE SPECIFICALLY REQUIRED BY LAW, THERE IS NO WARRANTY OR SERVICE BULLETIN COVERAGE ON THIS PRODUCT IF IT IS SOLD OUTSIDE THE COUNTRY OF THE SELLING DEALER'S AUTHORIZED LOCATION. This policy does not apply to products that have received authorization for export from POLARIS. Dealers may not give authorization for export. You should consult an authorized dealer to determine this product's warranty or service coverage if you have any questions. This policy does not apply to products registered to government officials or military personnel on assignment outside the country of the selling dealer's authorized location. This policy does not apply to Safety Bulletins.

10.10.6: Notice

If your product is registered outside of the country where it was purchased and you have not followed the procedure set above, your product will no longer be eligible for warranty or service bulletin coverage of any kind, other than safety bulletins. Products registered to government officials or military personnel on assignment outside of the country where the product was purchased will continue to be covered by the Limited Warranty.

Please work with your dealer to resolve any warranty issues. Dealership contacts can be found via this website, if needed:

www.polaris.com/en-us/contact

Should your dealer require any additional assistance, they will contact the appropriate person at POLARIS.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state or in different countries. If any of the above terms are void because of federal, state, local law, all other warranty terms will remain in effect.

For questions call POLARIS Customer Assistance:

United States & Canada: 1-800-POLARIS (1-800-765-2747)

French: 1-800-268-6334

10.10.7: U.S.A. EPA Emissions Limited Warranty

This emissions limited warranty is in addition to the POLARIS standard limited warranty for your vehicle. POLARIS Industries Inc. warrants that at the time it is first purchased, this emissions-certified vehicle is designed, built and equipped so it conforms with applicable U.S. Environmental Protection Agency emission regulations. POLARIS warrants that the vehicle is free from defects in materials and workmanship that would cause it to fail to meet these regulations.

The warranty period for off road vehicles 100cc or greater emissions-certified vehicles starts on the date of purchase by original retail purchaser and continues for a period of 500 hours of engine operation, 3100 mi (5000 km) of vehicle travel, or 30 calendar months from the date of purchase, whichever comes first. The warranty period for ATVs less than 100cc emissions-certified vehicles starts on the date of purchase by original retail purchaser and continues for a period of 250 hours of engine operation, 1550 mi (2500 km) of vehicle travel, or 30 calendar months from the date of purchase, whichever comes first. This EPA emissions warranty period is extended for at least as long as the standard factory warranty that POLARIS provides on the vehicle as a whole. The EPA emissions warranty period does not further extend if you purchase additional warranty coverage in the form of a service contract or other paid warranty extension, but emission-related parts may be covered subject to the terms of any such paid service contract or paid warranty extension.

This emissions limited warranty covers components whose failure increases the vehicle's regulated emissions, and it covers components of systems whose only purpose is to control emissions. Repairing or replacing other components not covered by this warranty is the responsibility of the vehicle owner. This emissions limited warranty does not cover components whose failure does not increase the vehicle's regulated emissions.

For exhaust emissions, emission-related components include any engine parts related to the following systems:

  • Air-induction system

  • Fuel system

  • Ignition system

  • Exhaust gas recirculation systems

The following parts are also considered emission-related components for exhaust emissions:

  • After treatment devices

  • Crankcase ventilation valves

  • Sensors

  • Electronic control units

The following parts are considered emission-related components for evaporative emissions:

  • Fuel Tank

  • Fuel Cap

  • Fuel Line

  • Fuel Line Fittings

  • Clamps*

  • Pressure Relief Valves*

  • Control Valves*

  • Control Solenoids*

  • Electronic Controls*

  • Vacuum Control Diaphragms*

  • Control Cables*

  • Control Linkages*

  • Purge Valves

  • Vapor Hoses

  • Liquid/Vapor Separator

  • Carbon Canister

  • Canister Mounting Brackets

  • Carburetor Purge Port Connector


*As related to the evaporative emission control system.


Emission-related components also include any other part whose only purpose is to reduce emissions or whose failure will increase emissions without significantly degrading engine/equipment performance. The exclusive remedy for breach of this limited warranty shall be, at the exclusive option of POLARIS, repair or replacement of any defective materials, components or products. THE REMEDIES SET FORTH IN THIS LIMITED WARRANTY ARE THE ONLY REMEDIES AVAILABLE TO ANY PERSON FOR BREACH OF THIS WARRANTY. POLARIS SHALL HAVE NO LIABILITY TO ANY PERSON FOR INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES OF ANY DESCRIPTION, WHETHER ARISING OUT OF EXPRESS OR IMPLIED WARRANTY OR ANY OTHER CONTRACT, NEGLIGENCE OR OTHER TORT OR OTHERWISE. THIS EXCLUSION OF CONSEQUENTIAL, INCIDENTAL, AND SPECIAL DAMAGES IS INDEPENDENT FROM AND SHALL SURVIVE ANY FINDING THAT THE EXCLUSIVE REMEDY FAILED OF ITS ESSENTIAL PURPOSE.

ALL IMPLIED WARRANTIES (INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE) ARE LIMITED IN DURATION TO THE WARRANTY PERIOD DESCRIBED HEREIN. POLARIS DISCLAIMS ALL EXPRESS WARRANTIES NOT STATED IN THIS WARRANTY. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply if it is inconsistent with the controlling state law.

This limited warranty excludes failures not caused by a defect in material or workmanship. This limited warranty does not cover damage due to accidents, abuse or improper handling, maintenance or use. This limited warranty also does not cover damage to any engine as a result of being structurally altered, or when the vehicle has been used in racing competition. This limited warranty also does not cover physical damage, corrosion or defects caused by fire, explosions or other similar causes beyond the control of POLARIS.

Owners are responsible for performing the scheduled maintenance identified in the owner's manual. POLARIS may deny warranty claims for failures that have been caused by the owner's or operator's improper maintenance or use, by accidents for which POLARIS has no responsibility, or by acts of God.

Any qualified repair shop or person may maintain, replace, or repair the emission control devices or systems on your vehicle. An authorized POLARIS dealer can perform any service that may be necessary for your vehicle.

POLARIS also recommends POLARIS parts, however equivalent parts may be used for such service. It is a potential violation of the Clean Air Act if a part supplied by an aftermarket parts manufacturer reduces the effectiveness of the vehicle's emission controls. Tampering with emission controls is prohibited by federal law.

10.10.8: California Residents

Certain POLARIS Off-Road Vehicles are available in 49-state and 50-state versions. Only the 50-state models are certified for sale in California. The 50-state models available for sale in California are identified by the letter “B” in the ninth position of the model number (e.g., R16RTE87B). The POLARIS 50-state models are designed and built with features such as a reduced cargo box capacity. Any modifications to these features may be a violation of the applicable California regulations and may void this limited emissions warranty offered by the manufacturer.

The California evaporative emissions control system limited warranty statement below applies to your Off Highway Recreational Vehicle in California if the vehicle is equipped with an evaporative emission control system and is labeled with a Vehicle Evaporative Emissions Control Information label indicating that the vehicle conforms to California evaporative emissions regulations applicable to new off-road sport vehicles, all-terrain vehicles, or off-road utility vehicles. These vehicles are referred to as “OHRV-EVAP” below.

CALIFORNIA EMISSION CONTROL WARRANTY STATEMENT

YOUR WARRANTY RIGHTS AND OBLIGATIONS

The California Air Resources Board and POLARIS Industries Inc. are pleased to explain the emission control system warranty on your model year 2018 and newer Off Highway Recreational Vehicle. In California, new off-highway recreational vehicles must be designed, built and equipped to meet the State's stringent anti-smog standards. POLARIS must warrant the emission control system on your OHRV-EVAP for the periods of time listed below provided there has been no abuse, neglect or improper maintenance of your OHRV-EVAP.

Your emission control system may include parts such as the carburetor or fuel injection system, fuel tank, fuel hoses, carbon canister, engine computer and Evaporative Emissions Control System parts listed in the U.S.A. EPA Emissions Limited Warranty. Also included may be hoses, belts, connectors and other emission-related assemblies. Where a warrantable condition exists, POLARIS will repair your OHRV-EVAP at no cost to you including diagnosis, parts and labor.

MANUFACTURER’S WARRANTY COVERAGE:

For model year 2018 and newer OHRV-EVAP models.

For 30 months, or 2500 mi (4023 km), or 250 hours, whichever comes first, except for evaporative components over the OHRV high-priced warranty value, which is covered for 60 months, or 5000 mi (8047 km), or 500 hours, whichever comes first.

If any emission-related part on your OHRV-EVAP is defective, the part will be repaired or replaced by POLARIS.

OWNER'S WARRANTY RESPONSIBILITIES:

As the OHRV-EVAP owner, you are responsible for the performance of the required maintenance listed in your owner's manual. POLARIS recommends that you retain all receipts covering maintenance on your OHRV-EVAP, but POLARIS cannot deny warranty solely for the lack of receipts or for your failure to ensure the performance of a scheduled maintenance.

As an owner you are responsible for presenting your OHRV-EVAP to an authorized POLARIS dealer as soon as a problem exists. The warranty repairs should be completed in a reasonable amount of time, not to exceed 30 days.

As an OHRV-EVAP owner, you should also be aware that POLARIS may deny you warranty coverage if your OHRV-EVAP or a part has failed due to abuse, neglect, improper maintenance or unapproved modifications.

ADD-ON OR MODIFIED PARTS

An add-on or modified part must be compliant with applicable CARB emission control standards. A violation of this requirement is punishable by civil and/or criminal punishment.

If you have any questions regarding your warranty rights and responsibilities, you should contact POLARIS Customer Assistance at 1-800-POLARIS (1-800-765-2747) or the California Air Resources Board at 9528 Telstar Avenue, El Monte, CA 91731.

United States & Canada: 1-800-POLARIS (1-800-765-2747)

French: 1-800-268-6334

Chapter 11: Maintenance Log

11.11.1: Maintenance Log

Use the following chart to record periodic maintenance.

DATE MILES (KM)
or HOURS
TECHNICIAN SERVICE PERFORMED / COMMENTS