Drive Belt Wear/Burn
| Possible Cause | Solution |
|---|---|
| Driving onto a pickup or tall trailer in high range | Use low gear during loading. |
| Starting out going up a steep incline | Use low gear. |
| Driving at low RPM or ground speed (3-7 MPH) | Drive at a higher speed or use low gear more frequently. |
| Insufficient warm-up at low ambient temperatures | Warm the engine at least 5 minutes. With the transmission in neutral, advance the throttle to about 1/8 throttle in short bursts, 5 to 7 times. The belt will become more flexible and prevent belt burning. |
| Slow/easy clutch engagement | Use the throttle quickly and effectively. |
| Towing/pushing at low RPM/low ground speed | Use low gear only. |
| Utility use/plowing | Use low gear only. |
| Stuck in mud or snow | Shift the transmission to low gear and carefully use fast,
aggressive throttle application to engage clutch. WARNING: Excessive throttle may cause loss of control and vehicle rollover. |
| Climbing over large objects from a stopped position | Shift the transmission to low gear and carefully use fast,
brief, aggressive throttle application to engage clutch. WARNING: Excessive throttle may cause loss of control and vehicle rollover. |
| Belt slippage from water or snow ingestion into the PVT system | Dry out the PVT (see PVT Drying). Inspect clutch seals for damage if repeated leaking occurs. |
| Clutch malfunction | Your POLARIS dealer, or other qualified person, can assist. |
| Poor engine performance | Check for fouled plug or foreign material in gas tank or fuel lines. Your POLARIS dealer, or other qualified person, can assist. |
| Slippage from failure to warm up belt | Always warm up the belt by operating below 30 mph for one mile (5 miles or more when temperature is below freezing). |
| Wrong or missing belt | Install the recommended belt. |
| Improper break-in | Always break in a new belt and/or clutch. |