en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Headlight/Parking Light Lamp Replacement

WARNING
Poor lighting can result in loss of control or an accident. Lights become dirty during normal operation. Wash the headlights and taillights frequently.

Hot components can cause serious burns to skin. Do not service the headlamps until they've cooled.

When servicing a halogen lamp, do not touch the lamp with bare fingers. Oil from your skin leaves a residue, causing a hot spot that will shorten the life of the lamp. Hold the plastic part of the lamp.

  1. Place the transmission in PARK.

  2. Reach under the front bumper area to locate the lighting connectors.

  3. Parking Light Lamp: Disconnect the harness connector. Turn the socket counter-clockwise 1/8 turn and remove the lamp assembly. Pull the lamp straight out to remove it from the socket.

  4. Headlight Lamp: Disconnect the harness connector. Remove the rubber cover from the back of the headlight. Press and turn the locking collar counter-clockwise (left headlight) or clockwise (right headlight) to release the lamp assembly.

  5. Install the new lamp. Apply a small amount of dielectric grease to the lamp socket or terminals.

  6. Reverse all steps to reassemble components.

Parent topic: Lights