en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Suspension Settings

Front and Rear Spring Preload

With the exception of MacPherson strut models, the front and rear suspensions of your ATV are preload adjustable to five possible settings. The spring preload is factory-set to the lowest setting and is appropriate for almost all riding conditions.

Adjust the suspension to maintain vehicle handling, brake performance, and clearance height while carrying cargo loads.

When adjusting the suspension of your ATV, heed the following rules:

  • Always return the suspension to the factory (lowest) setting after the cargo load is removed from the vehicle as the increased suspension height will negatively affect vehicle stability when operating without cargo.

  • Always apply the same adjustment setting to all four wheels (MacPherson strut models excluded).

Adjust the shock springs by rotating the adjustment cam clockwise to increase spring tension or counterclockwise to decrease tension.

  • 1 Cam

  • 2 High Tension

  • 3 Low Tension

WARNING
Uneven adjustment settings may cause poor vehicle handling, resulting in severe injury or death. Always adjust both the left and right spring preload settings equally. Your Polaris dealer, or other qualified technician, can assist.