en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Factory Default Preload Settings

Factory Default Preload Settings
RZR XP 1000 Front 1.49 inches (38 mm)
Rear 7.75 inches (197 mm)
RZR XP 4 1000 Front 2.04 inches (51 mm)
Rear 5.83 inches (148 mm)
RZR XP 1000 Trails and Rocks Edition Front 1.30 inches (33 mm)
Rear 7.65 inches (194 mm)

Follow these guidelines if you make adjustments to this suspension.

  • Always return the suspension to the factory setting after the load is removed from the vehicle. The increased suspension height will negatively impact vehicle stability when operating without a load.

  • Always apply the same adjustment setting to all four wheels.

Do not increase the spring preload by more than one inch (25.4 mm) over the factory setting.