Malfunction Indicator Troubleshooting
The malfunction codes will blink on the controller. The code definitions provided here are for informational purposes only.
TIP
If the indicator illuminates due to a minor issue
such as a low voltage condition or a sequence fault (reversing direction
without releasing the accelerator), select neutral and turn the key
off and on to clear the error. If the error does not clear, please
see your POLARIS dealer for diagnosis and repair.
| # of Blinks | Code Definition |
|---|---|
| 1 | Data or configuration error |
| 2 | Sequence fault |
| 3 | Power fault |
| 4 | Contactor issue |
| 6 | Throttle input error |
| 7 | Voltage protection |
| 8 | Controller or motor out of temperature range |
| 13 | Software fault |