Fuse Replacement
If the engine stops or will not start, or if you experience other electrical failures, a fuse may need replacement. Locate and correct any short circuits that may have caused the blown fuse, then replace the fuse.
Spare fuses are provided in the fuse box.
-
Access the fuses under the front box.
-
Remove the fuse box cover.
-
Remove the suspect fuse from the fuse panel. If the fuse is blown, install a new fuse with the same amperage rating.
-
Reinstall the fuse box cover.
-
Close and secure the front box and cover.
SCRAMBLER XP 1000
EFI RELAY |
FAN RELAY |
FUEL PUMP RELAY |
LOW BEAM RELAY |
EPS RELAY (OPT.) |
REAR OF VEHICLE |
START RELAY |
|||||
CHASSIS RELAY |
LIGHTS/START 20A |
DRIVE 20A |
ACC 20A |
EPS (OPT.) 30A |
HIGH BEAM RELAY |
FUEL PUMP 10A |
EFI 10A |
UNSWITCH 10A |
FAN CKT BKR 20A |