Headlight Beam Adjustment
To adjust the headlight beam, do the following:
-
Place the vehicle on a level surface with the headlight approximately 7.6 m ( 25 ft) from a wall.
-
Measure the distance from the floor to the center of the headlight and make a mark on the wall at the same height.
-
Apply the brakes. Start the engine. Turn on the headlights.
-
Observe the headlight aim. The most intense part of the headlight beam should be aimed 20 cm (8") below the mark placed on the wall. Include the weight of a rider on the seat while performing this step.
-
If a headlight needs adjustment, locate the adjustment screw 1 at the rear of the headlight.
-
Tighten the screw to adjust the lamp up. Loosen the screw to adjust the lamp down.
-
Repeat steps 4-6 until the lamp is properly adjusted.