• English français Español italiano Deutsche português русский — Russian 日本語 — Japanese 中文 — Chinese
Home page logo
  • Table of Contents
  • Language
    English français Español italiano Deutsche português русский — Russian 日本語 — Japanese 中文 — Chinese

© Polaris Inc.

  • Site Map
  • Privacy Policy
  • Accessibility
Home page logo
View as Table of Contents View as One Page

2023 800 Titan Adventure Owner’s Manual

  • i 2023 800 Titan Adventure Owner’s Manual
  • ii Welcome
  • iii Safety Symbols and Signal Words
  • Table Of Contents
  • Chapter 1: Introduction
    • 1.1.1: Important Notes for Owners and Drivers
    • 1.1.2: Preservation of the Environment
      • 1.1.2.1: Noise Level
      • 1.1.2.2: Air Pollution
    • 1.1.3: Vehicle Identification Numbers
      • 1.1.3.1: Key Identification
    • 1.1.4: Radio Compliance Statements
    • 1.1.5: Reporting Safety Defects (Canada)
  • Chapter 2: Safety
    • 2.2.1: Operator Safety
      • 2.2.1.1: Stay Clear of Track
      • 2.2.1.2: Stay Clear of Engine
      • 2.2.1.3: Riding Position
      • 2.2.1.4: Rider Capacity
      • 2.2.1.5: Riding Apparel
        • 2.2.1.5.1: Helmet
        • 2.2.1.5.2: Eye Protection
        • 2.2.1.5.3: Clothing
      • 2.2.1.6: Survival Preparation
      • 2.2.1.7: Excessive Speed
      • 2.2.1.8: Driver Awareness
      • 2.2.1.9: Disabled Operators
      • 2.2.1.10: Mountainous Terrain Riding
        • 2.2.1.10.1: Get the Safety Gear
        • 2.2.1.10.2: Get to Know Your Safety Gear
        • 2.2.1.10.3: Get the Picture
        • 2.2.1.10.4: Get Out of Harm’s Way
        • 2.2.1.10.5: Get to Know Your Mountain Snowmobile
        • 2.2.1.10.6: Get the Forecast
        • 2.2.1.10.7: Get Avalanche Safety Training
        • 2.2.1.10.8: Avalanche Awareness
      • 2.2.1.11: Ice and Snow Build-up
      • 2.2.1.12: Driving on Slippery Surfaces
      • 2.2.1.13: Inadequate Snow Conditions
      • 2.2.1.14: Operating in Deep Snow
      • 2.2.1.15: Hidden Obstructions
      • 2.2.1.16: Driving Downhill
      • 2.2.1.17: Driving in Hilly Terrain
      • 2.2.1.18: Drive Belt
      • 2.2.1.19: Intake Silencer
      • 2.2.1.20: Clutches
      • 2.2.1.21: Cold Weather Drive-Away
      • 2.2.1.22: Maneuverability
      • 2.2.1.23: Driving Responsibly
      • 2.2.1.24: Windchill/Temperature Charts
        • 2.2.1.24.1: Windchill Chart (°F)
        • 2.2.1.24.2: Windchill Chart (°C)
    • 2.2.2: Safety Labels and Locations
      • 2.2.2.1: 800 Titan
        • 2.2.2.1.1: Clutch Warning
        • 2.2.2.1.2: Fuel Gauge Setting Caution
        • 2.2.2.1.3: General Warning
        • 2.2.2.1.4: Moving Parts Warning
  • Chapter 3: Features
    • 3.3.1: Component Location
      • 3.3.1.1: Titan
      • 3.3.1.2: Controls
      • 3.3.1.3: Gear Selector
      • 3.3.1.4: Ignition Switch
      • 3.3.1.5: 12-Volt RCA Power Sources
      • 3.3.1.6: Adjustable Headlight
      • 3.3.1.7: Spare Belt Holder / Tools
      • 3.3.1.8: Rail Scratchers
      • 3.3.1.9: Detonation Elimination Technology (DET)
      • 3.3.1.10: Oil Pump Failure Protection (if equipped)
      • 3.3.1.11: Extended Idle Engine Shutoff
      • 3.3.1.12: ECU Speed Limiter
      • 3.3.1.13: Security System (Ignition Lock System)
  • Chapter 4: Gauge
    • 4.4.1: Standard Instrument Cluster
      • 4.4.1.1: Indicator Lamps
      • 4.4.1.2: Rider Information Center
        • 4.4.1.2.1: Information Display Area
        • 4.4.1.2.2: Speed Display Area
        • 4.4.1.2.3: Odometer/Engine Hour Display Area
        • 4.4.1.2.4: Standard/Metric Display
        • 4.4.1.2.5: Diagnostic Display Mode
    • 4.4.2: Fuel Type Selection
      • 4.4.2.1: POLARIS Interactive Digital Display (PIDD)
    • 4.4.3: Engine Overheat Indicators
      • 4.4.3.1: Flashing Indicator
      • 4.4.3.2: Engine-Cooling Actions
  • Chapter 5: The Perfect Fit
    • 5.5.1: Suspension Quick Set-Up Guide
      • 5.5.1.1: Introduction
      • 5.5.1.2: Shock Locations
      • 5.5.1.3: Shock Compression Damping
      • 5.5.1.4: Front Suspension (IFS) Factory Shock Settings
      • 5.5.1.5: Rear Suspension
        • 5.5.1.5.1: Front Track Shock Settings
        • 5.5.1.5.2: Rear Track Shock Settings
        • 5.5.1.5.3: Torsion Spring Adjustments
      • 5.5.1.6: Limiter Strap Adjustment
    • 5.5.2: Handlebar Settings
      • 5.5.2.1: Handlebar Component Torque Settings
      • 5.5.2.2: Handlebar Component Locations
      • 5.5.2.3: Left Hand Control Adjustment
      • 5.5.2.4: Throttle Block Alignment
      • 5.5.2.5: Engine Stop Switch Alignment
      • 5.5.2.6: Riser Angle
      • 5.5.2.7: Handlebar Angle
  • Chapter 6: Pre-Ride Inspections
    • 6.6.1: Pre-Ride Checklist
    • 6.6.2: Pre-Ride Suspension Inspection
    • 6.6.3: Before Starting the Engine
      • 6.6.3.1: Read and Understand Your Owner's Manual
      • 6.6.3.2: Throttle Lever
      • 6.6.3.3: Throttle Safety Switch
      • 6.6.3.4: Brakes
        • 6.6.3.4.1: Brake Lever Travel
        • 6.6.3.4.2: Lever Feel
      • 6.6.3.5: Parking Brake Lever Lock
        • 6.6.3.5.1: Lock Engagement
        • 6.6.3.5.2: Lock Release
      • 6.6.3.6: Steering System
      • 6.6.3.7: Track
      • 6.6.3.8: Hood and Side Panel Fasteners
      • 6.6.3.9: Recoil Rope
    • 6.6.4: Start the Engine and Check
      • 6.6.4.1: Engine Stop Switch
      • 6.6.4.2: Ignition Switch
      • 6.6.4.3: Tether Switch (if equipped)
      • 6.6.4.4: Lighting
      • 6.6.4.5: Mirrors (if equipped)
      • 6.6.4.6: Operating Area
  • Chapter 7: Operation
    • 7.7.1: Starting the Engine
      • 7.7.1.1: Restarting an Engine
    • 7.7.2: Break-In Period
      • 7.7.2.1: Engine Break-In
        • 7.7.2.1.1: Engine Break-In Period
      • 7.7.2.2: Oil Injection System
      • 7.7.2.3: Drive Belt Break-In
      • 7.7.2.4: Track Break-In
    • 7.7.3: Track Warm-Up
    • 7.7.4: Slide Rail and Track Cooling
    • 7.7.5: Fuel
    • 7.7.6: Fuel Recommendation
    • 7.7.7: Fuel System Deicers
    • 7.7.8: Oil
      • 7.7.8.1: Low Oil Level
    • 7.7.9: Throttle Lever
    • 7.7.10: Engine Stop Switch
    • 7.7.11: Throttle Safety Switch
    • 7.7.12: Emergency Stopping
    • 7.7.13: Daily Storage
    • 7.7.14: Towing
  • Chapter 8: Emissions Control Systems
    • 8.8.1: Emission Control Information
      • 8.8.1.1: Emission Control Label
      • 8.8.1.2: Emission Control Maintenance Requirements
      • 8.8.1.3: Owner's Responsibilities
      • 8.8.1.4: Non-ionizing Radiation
  • Chapter 9: Maintenance
    • 9.9.1: POLARIS Recommended Maintenance Program
    • 9.9.2: Polaris Maintenance Schedule
    • 9.9.3: Lubrication
      • 9.9.3.1: Rear Suspension
      • 9.9.3.2: Oil Lines
    • 9.9.4: Hood/Side Panel
    • 9.9.5: Intake Filters
    • 9.9.6: Fuel Pump
    • 9.9.7: Fuel Filter / Fuel Lines
    • 9.9.8: Spark Plugs
      • 9.9.8.1: Spark Plug Recommendations
      • 9.9.8.2: Spark Plug Maintenance
      • 9.9.8.3: Spark Plug Condition
    • 9.9.9: Cooling System
      • 9.9.9.1: Coolant
      • 9.9.9.2: Coolant Level
      • 9.9.9.3: Flushing the Cooling System
      • 9.9.9.4: Bleeding the Cooling System
    • 9.9.10: Exhaust System
    • 9.9.11: Brakes
      • 9.9.11.1: Hydraulic Brake Inspection
      • 9.9.11.2: Brake Components
      • 9.9.11.3: Excessive Lever Travel
      • 9.9.11.4: Brake Fluid
      • 9.9.11.5: Bleeding the Hydraulic Brake System
    • 9.9.12: Lights
    • 9.9.13: Fuse Replacement
      • 9.9.13.1: Constant Power Fuse
    • 9.9.14: Clutch System
      • 9.9.14.1: Clutch Alignment Offset
      • 9.9.14.2: Drive Belt Condition
      • 9.9.14.3: Drive Belt Deflection
      • 9.9.14.4: Belt Deflection Adjustment
      • 9.9.14.5: Drive Belt Removal
      • 9.9.14.6: Drive Belt Installation
    • 9.9.15: Drive System
      • 9.9.15.1: Transmission Fluid Level Check
      • 9.9.15.2: Transmission Fluid Change
    • 9.9.16: Track Maintenance
      • 9.9.16.1: Track Inspection
      • 9.9.16.2: Track Lubrication
      • 9.9.16.3: Track Alignment
      • 9.9.16.4: Track Tension
    • 9.9.17: Steering System
      • 9.9.17.1: Front Suspension Inspection
      • 9.9.17.2: Ski Alignment
      • 9.9.17.3: Ski Skags
        • 9.9.17.3.1: Skag Replacement
      • 9.9.17.4: Rail Slide Wear
    • 9.9.18: Battery Maintenance
      • 9.9.18.1: Battery Identification
      • 9.9.18.2: Battery Removal
      • 9.9.18.3: Battery Installation
      • 9.9.18.4: Battery Charging
      • 9.9.18.5: Battery Charge Relay Control
      • 9.9.18.6: Off Season Storage
      • 9.9.18.7: Battery Maintenance
    • 9.9.19: Transporting the Snowmobile
    • 9.9.20: Summer/Long-Term Storage Guide
      • 9.9.20.1: Treating the Fuel System
      • 9.9.20.2: Fogging the Engine
      • 9.9.20.3: Drive Belt Storage
      • 9.9.20.4: Battery and Electrical System Storage
      • 9.9.20.5: Cleaning the Snowmobile
      • 9.9.20.6: Lubricate the Pivots
      • 9.9.20.7: Storing the Snowmobile
    • 9.9.21: Winter Ride Preparation
  • Chapter 10: Specifications
    • 10.10.1: 800 Titan Adventure 155
  • Chapter 11: Troubleshooting
    • 11.11.1: Engine Troubleshooting
    • 11.11.2: Suspension Troubleshooting
    • 11.11.3: Drive Belt Troubleshooting
    • 11.11.4: Troubleshooting (DET)
  • Chapter 12: Warranty
    • 12.12.1: Service and Warranty Information
      • 12.12.1.1: Obtaining Service and Warranty Assistance
      • 12.12.1.2: Limited Warranty
      • 12.12.1.3: Registration
      • 12.12.1.4: Warranty Coverage and Exclusions
        • 12.12.1.4.1: Limitations of Warranties and Remedies
          • 12.12.1.4.1.1: Lubricants and Fluids
      • 12.12.1.5: How to Obtain Warranty Service
        • 12.12.1.5.1: In the country where your product was purchased:
        • 12.12.1.5.2: Outside the country where your product was purchased:
        • 12.12.1.5.3: If you move:
        • 12.12.1.5.4: If you purchase from a private party:
      • 12.12.1.6: Exported Products
      • 12.12.1.7: Notice
      • 12.12.1.8: U.S.A. EPA Emissions Limited Warranty
  • Chapter 13: Maintenance Log
    • 13.13.1: Maintenance Log
  • Index

Rear Suspension

In this section:

  1. Front Track Shock Settings
  2. Rear Track Shock Settings
  3. Torsion Spring Adjustments
Parent topic: Suspension Quick Set-Up Guide

Was this helpful?

Thanks!

Building One-Page View

This might take a few seconds.