Polaris Maintenance Schedule
The intervals shown are based on vehicles operated under normal conditions.
Each interval is given in hours and miles (kilometers). Items should be serviced at whichever interval comes first following the Initial Break-In Service.
Continue to reference the following maintenance schedules at the given intervals as hours and miles (kilometers) increase on the vehicle.
Vehicles subjected to severe use must be serviced at 50% of the stated interval. Examples of Severe Use: Frequent immersion in mud, water, or sand, constant high RPM use, prolonged low-speed heavy load operation, extended idle, and short trip cold weather operation.
Initial Break-In
Service First 25 Hours / 1 Month |
|
---|---|
Engine Oil and Filter | Change the engine oil and filter. |
Spark Arrestor | Clean out. |
Air Filter | Inspect air filter; replace as necessary. Ensure proper installation of filter and airbox cover. Inspect ducts and screens; clean as necessary. |
Cooling System | Fluid level inspection; inspect for fluid leaks; add coolant if needed. Inspect coolant strength seasonally; pressure test system yearly. |
General Lubrication | Locate all applicable fittings and grease. |
Shift Cable / Linkage | Inspect; adjust as needed |
Parking Brake (if applicable)* | Inspect and adjust as needed. |
Battery | Check terminals; terminals should be tight and free of corrosion. Clean, test, and replace as necessary. |
Front Gearcase Fluid | Initial fluid level inspection; inspect for fluid leaks; add lubricant if needed. |
Transmission Fluid | Initial fluid level inspection; inspect for fluid leaks; add lubricant if needed. |
The break-in period consists of the first 25 hours of operation. Careful treatment of a new engine and drive components will result in more efficient performance and longer life for these components. The items outlined in this service interval only need to be performed at the first 25 hours of operation. They do not need to be performed every 25 hours. | |
* It is recommended to have an authorized Polaris dealer perform these services. |
Vehicles subjected to severe use must be serviced at 50% of the stated interval. Examples of Severe Use: Frequent immersion in mud, water, or sand, constant high RPM use, prolonged low-speed heavy load operation, extended idle, and short trip cold weather operation.
Every 25 Hours / 500 Miles (800 km) or Yearly following Initial Break-In Service | |
---|---|
Air Filter | Inspect air filter; replace as necessary. Ensure proper installation of filter and airbox cover. Inspect ducts and screens; clean as necessary. |
Battery | Check terminals; terminals should be tight and free of corrosion. Clean, test, and replace as necessary. |
Brake System | Fluid level inspection; inspect for fluid leaks; add lubricant if needed. Inspect brake pad wear. |
General Lubrication | Locate all applicable fittings and grease. |
Radiator | Inspect; Clean external surfaces. |
Tires | Inspect; Adjust pressure level as needed; Inspect wear and replace as needed. |
* Have an authorized Polaris dealer or other qualified person perform these services. |
Vehicles subjected to severe use must be serviced at 50% of the stated interval. Examples of Severe Use: Frequent immersion in mud, water, or sand, constant high RPM use, prolonged low-speed heavy load operation, extended idle, and short trip cold weather operation.
Every 50 Hours / 1000 Miles (1600 km) or Yearly following Initial Break-In Service | |
---|---|
Engine Oil and Filter | Change the engine oil and filter. |
Front Gearcase Fluid | Change fluid. |
Transmission Fluid | Change fluid. |
Spark Arrestor | Clean out. |
Air Filter | Inspect air filter; replace as necessary. Ensure proper installation of filter and airbox cover. Inspect ducts and screens; clean as necessary. |
Battery | Check terminals; terminals should be tight and free of corrosion. Clean, test, and replace as necessary. |
Brake System | Fluid level inspection; inspect for fluid leaks; add lubricant if needed. Inspect brake pad wear. |
General Lubrication | Locate all applicable fittings and grease. |
Radiator | Inspect; Clean external surfaces. |
Tires | Inspect; Adjust pressure level as needed; Inspect wear and replace as needed. |
Spark Plug | Replace as needed. |
Wiring | Inspect for wear, routing, and retention. |
Drive Belt | Inspect; replace as needed. |
Suspension Components / Alignment* | Inspect front and rear suspension bushings, and ball joints for loose or worn components; replace as needed. Inspect shock absorbers for leaks or damage. |
Cooling System | Fluid level inspection; inspect for fluid leaks; add coolant if needed. Inspect coolant strength seasonally; pressure test system yearly. |
Wheel Bearings | Inspect; replace as needed |
Parking Brake (if applicable)* | Inspect and adjust as needed. |
Fuel System* | Cycle key to pressurize fuel pump; check for leaks at fuel system connections, check for leaks at fill cap. |
Throttle Body / Intake Ducts / Flanges | Inspect ducts for proper sealing / air leaks |
Shift Cable / Linkage | Inspect; adjust as needed |
Steering Components | Inspect; replace as needed. |
* Have an authorized Polaris dealer or other qualified person perform these services. |
Vehicles subjected to severe use must be serviced at 50% of the stated interval. Examples of Severe Use: Frequent immersion in mud, water, or sand, constant high RPM use, prolonged low-speed heavy load operation, extended idle, and short trip cold weather operation.
Additional Maintenance Intervals | ||
---|---|---|
Every 24 months / 2 years |
Brake Fluid | Change fluid. |
Every 2000 miles (3200KM) / 24 months / 2 years |
Clutches* | Inspect bushings, rollers, wearable parts; clean; replace worn parts. |
Every 2500 miles (4000KM) |
Shock Absorbers* | Inspect; replace or rebuild (if applicable). |
Every 200 hours / 4000 miles (6400KM) |
Valve Clearance* | Inspect; adjust as needed. |
Every 5000 miles (8000KM) / 60 months / 5 years |
Coolant | Change fluid. |
* Have an authorized Polaris dealer or other qualified person perform these services. |