Lubrication Guide
Check and lubricate all components at the intervals outlined in the Maintenance Interval Chart. Items not listed in the chart should be lubricated at the General Lubrication interval.
The a-arms and lower control arms are lubricated at the factory, and no additional lubrication will be needed.
|
Item |
Recommended Lubricant |
Capacity at Fluid Change |
Fill Plug Torque |
Drain Plug Torque |
See Page |
|---|---|---|---|---|---|
|
Engine Oil |
PS-4 5W-50 4-Cycle Oil |
2 qt. (1.9 l) |
--- |
12 ft-lbs (16 N·m) | Engine Oil |
|
Transmission Oil |
AGL Gearcase Lubricant & Transmission Fluid |
37 oz. (1100 ml) |
12 ft-lbs (16 N·m) | 12 ft-lbs (16 N·m) | Transmission Oil |
|
Demand Drive Fluid (Front Gearcase) |
Demand Drive Fluid |
9.3 oz. (275 ml) |
19 ft-lbs (26 N·m) | 19 ft-lbs (26 N·m) | Front Gearcase (Demand Drive) Fluid |
|
Rear Gearcase Oil |
ATV Angle Drive Fluid (or GL5 80- 90 weight gear lube) |
7.1 oz. (210 ml) |
12 ft-lbs (16 N·m) | 12 ft-lbs (16 N·m) | Rear Gearcase Oil |
|
Brake Fluid |
DOT 4 Brake Fluid |
--- |
--- |
--- |
Brake Fluid Level |
|
Front Prop Shaft Yoke |
U-Joint Grease |
Grease fittings (3 pumps maximum) every 500 miles, before long periods of storage, or after pressure washing or submerging. |
|||