en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Heated and Cooled Seat

CAUTION
Do not put objects under or behind the seat as it could damage the heating and cooling components.
WARNING

Users who have compromised senses and are unable to feel temperature change or pain to the skin should use extra care when using the seat heater. The seat heater may cause burns even at low temperatures especially when used for long periods of time.

Do not place anything on the seat that insulates against heat such as blankets or cushions. This may cause the seat heater to overheat which may cause a burn or damage to the seat.

NOTICE
Seat should only be operated when engine is running. The system will automatically shut down if operation is attempted while the ignition is in “accessory” mode or the engine is not running. Seats will remain off until activated with switch. Both red and blue LED lights remain dimly lit when off. To turn off, press center OFF switch.

Cooling

  1. Press Blue switch to increase cool mode from LOW to MEDIUM to HIGH.

  2. Press and hold Blue switch for two seconds to skip straight to HIGH.

  3. Press Red switch to decrease cool mode from HIGH to MEDIUM to LOW.

    NOTICE
    When in cool mode, Blue LED will be brightly lit and fans in cushions will be on.

Heating

  1. Press Red switch to increase heat mode from LOW to MEDIUM to HIGH.

  2. Press and hold Red switch for two seconds to skip straight to HIGH.

  3. Press Blue switch to decrease heat mode from HIGH to MEDIUM to LOW.

    NOTICE
    When in heat mode, Red LED will be brightly lit and fans in cushions will be off.
Parent topic: Console and Switches