en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Seat Removal and Installation

To remove the seat, do the following:

  1. Pull up on the seat latch strap 1 located at the base of the seat.

  2. Tilt the seat forward and move it rearward.

  3. Lift the seat upward to remove it from the vehicle.

  1. Align the base to reinstall the seat. Make sure the seat tabs at the front edge of the seat slide onto the seat retainer tube.

  2. Confirm the seat is secure by pulling on the seat back and lifting up on the front edge of the seat. The seat should not disengage.

  3. Press down firmly at the rear of the seat to engage the rear latches.

Seat installation image below.

Parent topic: Seats