Lubrication Guide
Check and lubricate all components at the intervals outlined in the Polaris Maintenance Schedule on Polaris Maintenance Schedule. Items not listed in the chart should be lubricated at the General Lubrication interval.
The a-arms and lower control arms are lubricated at the factory, and no additional lubrication will be needed. However, if these components are subjected to severe use, grease zerks have been provided for additional lubrication at the user's discretion.
| Item | Recommended Lubricant | Capacity at Fluid Change | Fill Plug Torque | Drain Plug Torque | See Page |
|---|---|---|---|---|---|
| Engine Oil | PS-4 5W-50 4-Cycle Oil |
2 qt (1.9 l) |
— |
12 ft-lbs (16 N·m) |
Engine Oil |
| Transmission Fluid | AGL Gearcase Lubricant & Transmission Fluid |
32 oz (948 ml) |
12 ft-lbs (16 N·m) |
12 ft-lbs (16 N·m) |
Transmission Fluid |
| Front Gearcase Fluid | Demand Drive Fluid |
9 oz (265 ml) |
19 ft-lbs (26 N·m) |
19 ft-lbs (26 N·m) |
Front Gearcase (Demand Drive) Fluid |
| Brake Fluid | DOT 4 Brake Fluid | — | — | — | Foot Brake Fluid Level |
| Front Prop Shaft | U-Joint Grease | Grease fittings (3 pumps maximum) every 500 miles (800 km), before long periods of storage, or after pressure washing or submerging. | |||