Lubrication Guide
Check and lubricate all components at the intervals outlined in the Maintenance Interval Chart. Items not listed in the chart should be lubricated at the General Lubrication interval.
The a-arms and upper control arms are lubricated at the factory, and no additional lubrication will be needed. However, if these components are subjected to severe use, grease zerks have been provided for additional lubrication at the user's discretion.
| Item | Recommended Lubricant | Capacity at Fluid Change | Fill Plug Torque | Drain Plug Torque | See Page |
|---|---|---|---|---|---|
| Engine Oil | PS-4 5W-50 4-Cycle Oil |
2 qt (1.9 l) |
— |
12 ft-lbs (16 N·m) |
Engine Oil |
| Transmission Fluid | AGL Gearcase Lubricant & Transmission Fluid |
37 oz (1100 ml) |
12 ft-lbs (16 N·m) |
12 ft-lbs (16 N·m) |
Transmission Fluid |
| Front Gearcase Fluid | Demand Drive Fluid |
9.3 oz (275 ml) |
19 ft-lbs (26 N·m) |
19 ft-lbs (26 N·m) |
Front Gearcase (Demand Drive) Fluid |
| Rear Gearcase Fluid | Angle Drive Fluid |
7.1 oz (210 ml) |
12 ft-lbs (16 N·m) |
12 ft-lbs (16 N·m) |
Rear Gearcase Fluid |
| Brake Fluid | DOT 4 Brake Fluid | — | — | — | Brake Fluid Level |
| Front Prop Shaft Yoke | U-Joint Grease | Grease fittings (3 pumps maximum) every 500 miles (800 km), before long periods of storage, or after pressure washing or submerging. | |||
| A-Arms, Front and Rear | All-Season Grease | Grease fittings after extreme use or if suspension becomes squeaky. | |||