Removal Procedure

WARNING

Engine and exhaust components get hot and remain hot for a period of time after the engine is stopped. Wear insulated protective clothing or wait for components to cool sufficiently before working on the machine.

IMPORTANT
Protect all finished and painted surfaces during these operations.

Remove RH Foot Control

  1. Remove and keep the two fasteners A that secure the RH foot control to the motorcycle frame.

  2. Support the RH foot control with a strap or similar equipment.

    IMPORTANT
    Make sure to support and keep the RH foot control upright as the brake line will remain connected.

Remove Rear Heat Shield

  1. Remove and discard the two worm-drive clamps B.

  2. Remove the rear heat shield C.

Remove Front Heat Shield

  1. Remove and discard the three worm-drive clamps B.

    NOTICE
    Front heat shield hidden from image for illustration clarity.

  2. Remove the front heat shield D.

Remove Catalytic Converter Heat Shield

  1. Remove and discard the one worm-drive clamp B.

    NOTICE
    Catalytic converter heat shield hidden from image for illustration clarity.

  2. Remove and keep the two fasteners E that secure the heat shield to the motorcycle.

  3. Remove the catalytic converter heat shield F.

Parent topic: Installation Instructions