en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Battery Installation

Using a new battery that has not been fully charged can damage the battery and result in a shorter life. It can also hinder vehicle performance. Follow the instructions in the Battery Charging section before installing the battery.

  1. Ensure that the battery is fully charged.

  2. Place the battery in the battery holder.

  3. Coat the terminals with dielectric grease or petroleum jelly.

  4. Install the battery hold-down bracket and fastener. Torque to 24 in-lbs (3 Nm).

  5. Connect and tighten the red (positive) cable first.

  6. Connect and tighten the black (negative) cable last.

  7. Verify that cables are properly routed.

  8. Reinstall the seat.

Parent topic: Battery