en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Main Gearcase (Transaxle)

Always check and change the main gearcase oil at the intervals outlined in the Periodic Maintenance Chart. Maintain the oil level even with the bottom thread of the fill plug hole 1.

Refer to the Gearcase Specifications Chart for recommended lubricants, capacities and torque specifications.

Oil Check

The fill plug is located at the right rear of the vehicle.

To check the oil, do the following:

  1. Position the vehicle on a level surface.

  2. Remove the fill plug 1.

  3. Check the oil level.

  4. Add the recommended oil as needed.

  5. Reinstall the fill plug. Torque to specification.

Oil Change

The drain plug 2 is located on the lower right side of the main gearcase, near the fill plug 1. Refer to the Gearcase Specifications Chart for recommended lubricants, capacities and torque specifications.

To change the oil, do the following:

  1. Remove the fill plug.

  2. Place a drain pan under the drain plug. Remove the drain plug. Allow the oil to drain completely.

  3. Wipe the magnetic end of the drain plug clean to remove accumulated metallic filings.

  4. Reinstall the drain plug. Torque to specification.

  5. Add the recommended oil as needed. Do not overfill.

  6. Reinstall the fill plug. Torque to specification.

  7. Check for leaks. Dispose of used oil properly.

Parent topic: Gearcases