en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Brake Fluid

Inspect the brake system routinely. Inspect the level of the brake fluid before each operation.

WARNING
After opening a bottle of brake fluid, always discard any unused portion. Never store or use a partial bottle. Brake fluid is hygroscopic, meaning it rapidly absorbs moisture from the air. The moisture causes the boiling temperature of the brake fluid to drop, which can lead to early brake fade and the possibility of accident or severe injury.

Change the brake fluid every two years and any time the fluid becomes contaminated, the fluid level is below the minimum, or if the type and brand of the fluid in the reservoir are unknown.

  1. Position the vehicle on a level surface.

  2. Place the transmission in PARK.

  3. View the brake fluid level at the reservoir in the driver’s side wheel well.

  4. The level should be between the upper (MAX) and lower (MIN) level lines.

  5. If the fluid level is lower than the upper level line, add brake fluid to the upper (MAX) line.

  6. Apply the brake forcefully for a few seconds and check for fluid leakage around the fittings.