en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Radiator Coolant Level

Check the radiator coolant level ONLY if the overflow bottle is dry. If the overflow bottle contains fluid, the radiator level should NOT be inspected.

TIP
If the overflow bottle runs completely dry, there may be a leak in the system. Your POLARIS dealer, or other authorized, can inspect the cooling system.

  1. Remove the hood. See Hood.

    CAUTION
    Escaping steam can cause burns. Never remove the pressure cap while the engine is warm or hot. Always allow the engine to cool before removing the pressure cap.

  2. If the overflow bottle is dry, slowly remove the radiator pressure cap.

  3. View the coolant level through the opening.

  4. Use a funnel and slowly add coolant as needed.

  5. Reinstall the pressure cap securely. Use of a non-standard pressure cap will not allow the recovery system to function properly. Your POLARIS dealer, or other qualified person, can provide the correct replacement part.

  6. With the pressure cap securely installed, add coolant to the overflow bottle to the recommended level. Reinstall the coolant bottle cap.

Parent topic: Cooling System