en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Diagnostic Code

NOTICE

Diagnostic Code Screen will show available MIL that has come on during that ignition cycle.

  1. Press and hold the MODE button to enter the Options Menu.

    NOTICE

    “OPTIONS” will display on the screen for 3 seconds before showing first menu item.

  2. Select “Diagnostic Codes” from the Options Menu by pressing the MODE button.

    Toggle the Up/Down Buttons to cycle through Code(s).

    NOTICE

    This option will only be available if a fault code was set or is active during the current ignition key 'on' cycle. Turning off the ignition will clear any saved fault codes from the gauge.

    Reference the image shown above:

    1 Area A will Display FMI (XX)

    2 Area B will Display SPN (XXXXXX)

    3 Clock Area will Display Count (XXX)

  3. To exit the Options Menu the user can select Exit Menu function from Options Menu, can hold MODE Button and exit out of Options Menu, or not press any button for 10 seconds, which will exit out of the Options Menu.

Parent topic: Options Menu