en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Wheel Installation

WARNING

Improperly installed wheels can adversely affect tire wear and vehicle handling, which can result in serious injury or death. Always ensure that all nuts are torqued to specification. Do not service axle nuts that have a cotter pin installed. Your dealer can assist.

  1. Verify the parking brake is still applied.

  2. Place the wheel in the correct position on the wheel hub 5. Be sure the valve stem 2 is toward the outside and rotation arrows on the tire point toward forward rotation.

  3. Install the wheel nuts 1 and finger tighten.

  4. Carefully lower the vehicle to the ground.

  1. Torque the wheel nuts and/or hub nut 3 to the proper torque specification.

TORQUE

Wheel Lug Nuts:

30 ft-lbs (41 N·m)

Hub Castle Nuts:

Front: 60 ft-lbs (81 N·m)

Rear: 85 ft-lbs (115 N·m)

  1. If hub nut was removed, install a new cotter pin after the hub nut has been tightened. If the holes do not line up, turn the hub nut until the cotter pin 4 can be installed.

Parent topic: Tires