Driving Procedure
-
Wear a helmet, eye protection, gloves, long-sleeve shirt, long pants and over-the-ankle boots.
-
Perform the pre-ride inspection. See the Pre-Ride Inspection section for details.
-
Sit in the driver’s seat and fasten the seat belt.
-
Always make sure all cab doors are closed and latched when riding in this vehicle.
-
Place the transmission in PARK.
-
Start the engine.
-
Apply the service brakes and shift the transmission into gear.
-
Check your surroundings and determine your path of travel.
-
Release the parking brake (if equipped).
-
Keeping both hands on the steering wheel, slowly release the brakes and slowly depress the throttle with your right foot to begin driving.
-
Drive slowly. Practice maneuvering and using the throttle and brakes on level surfaces.
-
Do not carry a passenger until you have at least two hours of driving experience with this vehicle.