en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Front Gearcase

Always check and change the front gearcase oil at the intervals outlined in the Periodic Maintenance Chart. Maintain the oil level even with the bottom thread of the fill plug hole. Refer to the Gearcase Specifications Chart for recommended lubricants, capacities and torque specifications. See Lubricants / Service Products for the part numbers of POLARIS products.

ADC Models: Change the front gearcase fluid every 25 hours if the ADC unit is exposed to extreme use. Extreme use includes any of the following:

  • Operation in ADC mode for prolonged periods.

  • Constant ADC operation on hilly or mountainous terrain.

  • ADC is the primary mode of all-wheel-drive operation.

TIP
If the front gearcase makes excessive noise during ADC operation, change the demand drive fluid. If the noise continues, please see your POLARIS dealer or other qualified service person for service.

Oil Check

The front gearcase fill plug is located on the right side of the front gearcase.

  1. Position the vehicle on a level surface.

  2. Place the transmission in PARK.

  3. Remove the fill plug 1. Check the oil level.

  4. Add the recommended oil as needed.

  5. Reinstall the fill plug. Torque to specification.

Oil Change

  1. Support the vehicle securely with a jackstand.

  2. Remove the fill plug.

  3. Place a drain pan under the drain plug.

  4. Remove the drain plug. Allow the oil to drain completely.

  5. Clean and reinstall the drain plug. Torque to specification.

  6. Add the recommended oil.

  7. Reinstall the fill plug. Torque to specification.

  8. Check for leaks. Discard of used oil properly.