en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Seat Height Adjustment

Your Timbersled Ripper is equipped with a seat height adjustment feature. The factory setting is with the adjustment bolts in the low position (seat is at it’s tallest height).


To lower the seat height, perform the following procedure:

  1. Remove the cowl around the chassis by removing the 4 nylon rivet fasteners 1.

  2. Remove the 2 retaining bolts 2, one on each side of the chassis, from the upper shock mount.

  3. Position the upper shock mount up to the top hole 3 in the chassis.

  4. Install the retaining bolts and torque to specification.

  5. Reinstall the cowling. See Rear Cowling Assembly for installation instructions.

TORQUE
Upper Shock Retaining Bolts:

60 Nm