en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Pod Headlight Replacement

When servicing a halogen lamp, avoid touching the lamp with bare fingers. Oil from your skin leaves a residue, causing a hot spot that will shorten the life of the lamp. If fingers do touch a lamp, clean it with denatured alcohol.

CAUTION
Hot components can cause burns to skin. Allow lamps to cool before servicing.

  1. Remove the screws retaining the front half of the pod assembly.

  2. Remove the front half of the pod.

  3. Disconnect the lamp from the main harness.

  4. Remove the lamp form the housing.


NOTICE
If lens housing replacement is required, do so at this time.

  1. Install new lamp.

  2. Connect lamp to main wiring harness.

  3. Install front half of the pod. Torque fasteners until fully seated.

Parent topic: Lights