Turning Around on a Hill (K-Turn)
If the vehicle stalls while climbing a hill, never back it down the hill! Use the K-Turn to turn around.
         
         - 
               
               
Stop the vehicle. Keep your weight uphill.
 - 
               
               
Always engage ADC mode (if equipped) before ascending or descending a hill. If ADC mode is not equipped, apply AWD mode before ascending or descending a hill.
 - 
               
               
Lock the hydraulic parking brake.
 - 
               
               
Leave the transmission in forward gear. Turn the engine off.
 - 
               
               
Stay uphill of the vehicle and turn the handlebars full left.
 - 
               
               
Squeeze the brake lever to release the parking brake.
 - 
               
               
Slowly release the brake lever and allow the vehicle to roll around to your right until it's pointing across the hill or slightly downward.
 - 
               
               
Lock the hydraulic parking brake.
 - 
               
               
Remount from the uphill side. Keep your weight uphill. A passenger should not remount until the vehicle returns to firm, level ground.
 - 
               
               
Apply the foot brake.
 - 
               
               
With the transmission still in forward, start the engine.
 - 
               
               
Squeeze and release the brake lever to release the parking brake.
 - 
               
               
Release the foot brake and drive slowly downhill. Control speed with either the hand or foot brake until the vehicle is on level ground.