Coolant Level Inspection
NOTICE
A flashlight is required for viewing the coolant
level.
-
Allow the engine to cool before checking coolant level.
-
Position the motorcycle on level ground in the fully upright position.
-
Place a flashlight flush against an accessible area of the recovery bottle to illuminate the interior. View the coolant level through the window in the heat shield.
-
Maintain the coolant level at the COLD FULL mark on the recovery bottle (when the fluid is cool).
-
If the level is low, remove the seat to access the coolant fill cap 1.
NOTICEThe recovery bottle is vented to prevent overfilling. Coolant will vent onto the ground if overfilled. -
Remove the fill cap and add coolant. Do not overfill.
-
Reinstall the cap.