en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Gear Selector

Low gear is the primary driving range for your vehicle. High gear is intended for use on hard-packed surfaces with light loads. Using high gear for heavy loads, hilly terrain or in wet, muddy conditions will increase the chance of drive belt burning. See the Drive Belt Wear/Burn section on Drive Belt Wear/Burn.

  • To shift gears, brake to a complete stop. When the engine is idling, move the lever 1 to the desired gear.

  • P: Park
    R: Reverse
    N: Neutral
    L: Low Gear
    H: High Gear

NOTICE
Shifting gears with the engine speed above idle or while the vehicle is moving could cause transmission damage. Always shift when the vehicle is stationary and the engine is at idle.
TIP
Maintaining shift linkage adjustment is important to assure proper transmission function. Your POLARIS dealer, or other qualified person, can assist in resolving any shifting problems.

Using Low Range

Always shift into low gear for any of the following conditions.

  • Operating in rough terrain or over obstacles

  • Loading the vehicle onto a trailer

  • Towing loads

  • Driving frequently at low RPM or at ground speeds below 7 MPH (11 km/h)