en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Front Gearcase

Always check and change the front gearcase oil at the intervals outlined in the Polaris Maintenance Schedule. Maintain the oil level even with the bottom thread of the fill plug hole. Refer to the Gearcase Specifications Chart for recommended lubricants, capacities and torque specifications. See Lubricants / Service Products for the part numbers of POLARIS products.

Oil Check

The front gearcase fill plug is located on the right side of the front gearcase.

  1. Position the vehicle on a level surface.

  2. Place the transmission in PARK.

  3. Remove the fill plug 1. Check the oil level.

  4. Add the recommended oil as needed.

  5. Reinstall the fill plug. Torque to specification.

Oil Change

  1. Remove the fill plug.

  2. Place a drain pan under the drain plug.

  3. Remove the drain plug. Allow the oil to drain completely.

  4. Clean and reinstall the drain plug. Torque to specification.

  5. Add the recommended oil.

  6. Reinstall the fill plug. Torque to specification.

  7. Check for leaks. Discard of used oil properly.

Parent topic: Gearcases