Battery Maintenance
Keep battery terminals and connections free of corrosion. If cleaning is necessary, remove the corrosion with a stiff wire brush and wash with a solution of one tablespoon baking soda and one cup water. Rinse well with tap water and dry off with clean shop towels. Coat the terminals with dielectric grease or petroleum jelly to prevent corrosion.
Never store a battery in a partially charged condition or hard, crystal sulfation will form on the plates resulting in reduced efficiency and shorter service life of the battery.
If you do not drive the vehicle for more than TWO weeks, maintain Absorbent Glass Mat (AGM) batteries with the BatteryMINDer® 2012 AGM - 2 AMP charger (or a similar charger).
BatteryMINDer® 2012 AGM - 2 AMP battery charger
PN 2830438
If you plan to store the vehicle for ONE month or longer, remove the battery from the vehicle and store in a cool, dry location. Batteries will self-discharge more rapidly when stored in extreme temperatures. Continue to maintain the battery with a 2-AMP charger and inspect the battery every 60 days.
| Battery Type | Recharge Frequency | General Maintenance |
|---|---|---|
| Lead Acid Conventional | Every 30 to 60 days |
NEVER add electrolyte to the battery once the battery is in service. If necessary, only add distilled water to the battery. |
| Dry Shipped AGM | Inspect every 60 days |
NEVER add electrolyte or distilled water to the battery once the battery is in service. |
| Lead Acid Low Maintenance | Every 30 to 60 days |
NEVER add electrolyte or distilled water to the battery. Doing so will damage the case and shorten the life of the battery. |
| AGM Low Maintenance | Inspect every 60 days |
NEVER add electrolyte or distilled water to the battery. Doing so will damage the case and shorten the life of the battery. |