en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Drive Chain Tension

NOTICE
Drive Chain Tension requires the removal of the engine exhaust silencer. Proper removal and installation of the exhaust silencer is critical to engine performance. It is recommended your dealer performs this service at the intervals outlined in the maintenance table.

  1. Remove the side panels, hood, and exhaust silencer.

  2. Rotate the driven clutch counter-clockwise to move all chain slack to the tensioner side. Lock the brake lever lock, or have an assistant hold the brake lever firmly.

  3. Loosen the adjuster bolt jam nut 1.

  4. Finger tighten the adjuster bolt 2 until it can no longer be adjusted by hand, then back off 1/4 turn.

  5. Tighten the jam nut while holding the adjuster bolt.

    TORQUE

    Jam Nut

    21 ft-lbs (28 N·m)

  6. Reinstall the exhaust silencer, hood, and side panels.

  7. Release the brake lever lock.