en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Work Light Housing Replacement

  1. Remove the four work light pod screws 1 and remove the front half of the pod from the vehicle.

  2. Remove each rubber o-ring retainer 2 on each side of the pod bracket and remove the work light adjuster screw 3.

  3. Disconnect the main wiring harness 4 from the back of the work light.

  4. Lift the work light out of the vehicle to remove it.

  5. Reverse steps for installation. Torque screws to specification.

    TORQUE

    Work Light Pod Screws:

    20 in-lbs (2 N·m)

  6. Adjust the work light pod.

Parent topic: Lights