en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Headlight Aim Adjustment

The headlamp adjustment screws 1 are located inside the headlamp housing.

  1. On models equipped with a fairing, first remove the two headlight bezel screws (if equipped). Carefully pull down on the top edge of the headlight bezel to disengage the retention features, then remove the bezel from the fairing.

    Tool: M4 hex wrench or universal tool

  2. To adjust the headlamp vertically, tighten both top adjustment screws equally to adjust the beam downward. Loosen both screws equally to adjust the beam upward.

    Tool: M4 hex wrench or universal tool

  3. To adjust the headlamp horizontally, loosen the left side screw to adjust the beam to the left. Loosen the right side screw to adjust the beam to the right.
Parent topic: Lights