Headlight Aim Inspection
On LOW beam, the horizontal cut-off of the light beam 1 should be 4 in. (10 cm) lower than the center of the headlamp bulb and centered straight ahead at 32 ft. 10 in. (10 m).
- Verify that tire pressure is at specification. See the Tire Pressure section for details.
-
Verify that rear suspension ride height (preload) is at specification. See the Rear Shock Preload (Ride Height) Inspection section for details.
-
Position the motorcycle on a level surface with the headlight 32 ft. 10 in. (10 m) from a wall.
-
With the operator and passenger (if applicable) on board, bring the motorcycle to the fully upright position.
-
Start the engine and switch the headlamp to low beam. Observe the headlight aim on the wall.
-
Make any necessary adjustments to headlight aim.
| NUMBER | DESCRIPTION |
|---|---|
| 1 | 4 in (10 cm) to top cut-off of beam |
| 2 | Measure distance = 32 ft 10 in (10.0 m) |
| 3 | Headlight Center |