Scout Bobber, Scout Bobber Sixty, Scout Bobber Twenty, Scout Rogue, Scout Rogue Sixty
NOTICE
Use caution to avoid contact with the fuel tank
when removing the seat.
-
Grasp the front edge of the seat and pull upward abruptly to disengage the seat base grommet from the seat mount stud1.
-
Lift the seat to disengage the seat base from the rear frame.
-
To reinstall the seat, make sure the tabs on the seat base fully engage the rear frame section, then press downward firmly at the front edge of the seat to snap the stud to the seat base grommet.
WARNING
If the seat is not aligned in a straight-ahead
position, the grommet is not engaged to the stud. Make sure the grommet
is fully engaged to the stud before operating.