en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Passenger Hand Hold / Lug Wrench

Always adjust the passenger hand hold to a comfortable position for your passenger before operating. If needed, the passenger hand hold can be removed for use as a lug nut wrench with 18 mm and 19 mm sockets.

Adjusting Passenger Hand Hold / Lug Wrench

Make sure the adjustment screw 3 is fully locked after making adjustments.

  1. Release the lever lock 1 by rotating downward.

  2. Pull or push the bar to desired position.

  3. Turn adjustment screw 3 until finger tight.

  4. Lock the bar in place by rotating lever lock upward.

  5. Push and pull on the bar to verify it is secure.

    • If the bar is not secure, rotate the lever lock 1 downward, then repeat steps 3–5.

Removing Passenger Hand Hold / Lug Wrench

  1. Release the lever lock by rotating downward 1.

  2. Remove the pin 2 and lever lock 1.

  3. Remove the adjustment screw 3.

  4. Pull the bar out.

Reinstalling Passenger Hand Hold / Lug Wrench

  1. Push in the passenger hand hold and adjust to desired position.

  2. Install adjustment screw 3.

  3. Ensure the lever lock 1 is pointed downward.

  4. Put the pin 2 through the lever lock 1 and adjustment screw 3.

  5. Turn adjustment screw 3 until finger tight.

  6. Lock the passenger hand hold in place by rotating lever lock 1 upward.

  7. Push and pull on the hand hold to verify it is secure.

    • If the hand hold is not secure, rotate the lever lock 1 downward, then repeat steps 3-5.