Ignition Switch
The ignition switch has three positions: OFF, RUN, and START.
-
1 OFF Vehicle / Display power off
-
2 RUN Vehicle / Display power on
-
3 START Activates starter motor (if equipped)
This snowmobile is equipped with an electric start. Apply the brake and turn the key to START to crank the engine. When released, the key automatically returns to the RUN position.
IMPORTANT
If planning to be away from your vehicle
for longer than a few minutes, always turn the ignition switch to
the OFF position after using the engine stop switch. If the ignition
is left in the RUN position, the 7S Display will remain active and
continue to draw power from the battery. This snowmobile is not equipped
with manual start. If the battery is fully depleted, the engine will
not start.