Fuse / Relay Center
If the engine stops or will not start, if the power steering stops working (if equipped), or if you experience other electrical failures, a fuse may need replacement. Locate and correct any short circuits that may have caused the blown fuse, then replace the fuse. The fuse/relay center 1 is located under the driver’s side dashboard.
| Label | Value | Function |
|---|---|---|
|
FAN |
20A Circuit Breaker |
Fan |
|
EFI |
10A Fuse |
EFI Relay, Injectors, Coil, ECM, Chassis Relay Coil, Fan Relay Coil, Fuel Pump Relay Coil |
|
TERM ACCY |
10A Fuse |
Under Hood Terminal Block |
|
EPS (optional) |
30A Fuse |
Electronic Power Steering (optional) |
|
LIGHTS |
7.5A Fuse |
Accent Lights, Tail Lights |
|
INSTR ACCY |
15A Fuse |
Headlights, Dashlight, Ride Command Display Activation |
|
FUEL |
7.5A Fuse |
Fuel Pump |
|
CHASSIS |
10A Fuse |
All-Wheel Drive, TURF (optional), AWD Switch, Electronic Power Steering (EPS) Activation, Instrument Cluster Activation, Seatbelt Switch, Vehicle Speed Sensor |
|
SOCKET |
10A Fuse |
12V Auxiliary Outlet |
|
INSTR UNSW |
7.5A Fuse |
Instrument Cluster, Ride Command Display (if equipped), Diagnostic Port |