en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Transmission Fluid

Always check and change the transmission fluid at the intervals outlined in the Polaris Maintenance Schedule. See the Lubrication Guide section for fluid recommendations, capacities, and plug torques. Maintain the fluid level at the bottom of the fill plug hole 1.

The fill plug is located on the right side of the ATV behind the footwell. The drain plug 2 is located on the bottom rear side of the gearcase.

FLUID CHECK

  1. Remove the fill plug. Check the fluid level.

  2. Add the recommended fluid as needed to bring the level to the bottom of the fill hole threads.

  3. Reinstall the fill plug. Torque to specification.

    TORQUE

    Fill Plug:

    12 ft-lbs (16 N·m)

FLUID CHANGE

  1. Place a drain pan under the gearcase. Remove the drain plug. Allow the fluid to drain completely.

  2. Clean and reinstall the drain plug. Torque to specification.

    TORQUE

    Drain Plug:

    12 ft-lbs (16 N·m)

  3. Remove the fill plug. Add the proper amount of the recommended fluid.

  4. Reinstall the fill plug. Torque to specification.

    TORQUE

    Fill Plug:

    12 ft-lbs (16 N·m)

  5. Check for leaks.

  6. Dispose of used fluid properly.