Handlebar Component Torque Values
IMPORTANT
Moving a handlebar component without first loosening its screws/set screws may cut grooves into the handlebar, making it difficult to secure the component. Do not move a handlebar component without first loosening its mounting screws/set screws.
Take care to avoid damaging hand warmer/brake switch wires when moving components.
|
Component |
Torque Do not over-tighten |
|
|---|---|---|
| 1 |
Brake Master Cylinder Mounting Screw |
60-80 in-lbs (6.7-9 N·m) |
| 2 |
Handlebar Clamp Bolts |
11 ft-lbs (15 N·m) |
| 3 |
Throttle Block Set Screw |
27 in-lbs (3 N·m) |
| 4 |
Engine Stop Switch Set Screw |
12 in-lbs (1.4 N·m) |
| 5 |
Throttle Block Cover Screw |
6 in-lbs (0.7 N·m) |