Fuel Tank Installation

1. Lower fuel tank into position. Engage rear isolators first and rotate tank down onto front isolators.

   TIP

   Use soapy water to lubricate isolators to ease installation.
   

2. Connect fuel vent line B to fuel tank.

   

3. Connect fuel pump electrical connector A.

   

4. Rotate both fuel tank brackets upward to connect to isolator.

   

5. Attach bracket with retained screw to right hand front isolator and torque to specification.

   TORQUE

   Fuel Tank Mount Fastener:

   88 in-lbs (10 N·m)

   

6. Attach bracket with retained screw to left hand front isolator and torque to specification.

   TORQUE

   Fuel Tank Mount Fastener:

   88 in-lbs (10 N·m)

   

Connect Fuel Line

1. Connect fuel line to fuel rail.

   IMPORTANT

   Verify fuel line is properly seated and locked in place by listening for an audible “click” when pressing into place. Pull gently on quick connector to make sure a proper connection has been made.
   

2. Install coil cover and attach with three screws. Torque screws to specification.

   TORQUE

   Coil Cover Fastener:

   88 in-lbs (10 N·m)